Frete Grátis em todos os produtos
- [Including Packaging] The packaging includes: 1 pump; 1 piece of car cleaning cloth; 1 x outlet hose; 1 x inlet hose; 2 hose clamps; 2 battery clips.
- [Safe and Efficient] The motor of the engine oil and diesel fluid delivery pump is made of pure copper material, with good conductivity, corrosion resistance, rust resistance, and effective prevention of electric leakage or short circuit. Equipped with fuses for safer use. Low speed diesel fuel is about 2 gallons per minute, and engine oil is about 0.3 gallons per minute
- [Easy Installation] The oil change pump extractor is easy to install. Simply place the inlet and outlet hoses in a suitable position, connect the power clip to the car battery, and then press the button. This process is very simple, and you can often do it yourself to ensure that your engine runs smoothly.
- [Function] The oil/diesel pump extractor can siphon oil from your cars, motorcycles, Kick scooter, four-wheel bicycles, trucks, boats, forklifts, generators, tractors, riding lawn mowers, etc. and deliver diesel to cars, trucks, ships, boats, tractors, agricultural machinery, factory equipment, etc. without confusion and professional tools.
- [Note] In order to pump the oil correctly, please start the vehicle and heat the oil (to 40-60 degrees Celsius) for approximately 15 minutes (to 104 ° F-140 ° F). Otherwise, the oil change pump may have low suction or blockage. This oil pump is not used to extract water, gearbox oil (too viscous) or Flammable liquid (fuel, gasoline, etc.).
Votex - Made In USA - M14x1.5MM Magnetic Engine Oil Drain Plug w/High-Temperature Neodymium Magnet, Stainless Steel, For Acura, Audi, Chevrolet, Chrysler, Dodge, Ford, Honda,...
*$457.00
General Motors Genuine Parts 12625893 Engine Intake Manifold Cover
*$852.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
Zlirfy Oil Change Pump Extractor,12V 60W Oil Fluid Pump Extractor Scavenge Oil Suction Pump,Diesel Fluid Scavenge Suction Oil Transfer Pump,Oil Change Pump for Car Boat…
*$349.00
Informação adicional
| Manufacturer | Zlirfy |
|---|---|
| Brand | Qziulr |
| Model | 665DDCYB001 |
| Item Weight | 1.76 pounds |
| Package Dimensions | 8.31 x 7.44 x 3.58 inches |
| Item model number | 665DDCYB001 |
| Exterior | Brushed |
| Manufacturer Part Number | 665DDCYB001 |
| Date First Available | July 5, 2023 |
![Automotive Parts Replacement For 2004-2008 Acura TL V6, Honda Accord 2003 2004 2005 2006 2007 [4 Cylinder Engine Only] Power Steering Rack And Pinion 26-2703, 53601-SDA-A04...](https://m.media-amazon.com/images/I/41x+wAxi5zL._AC_SL1000_.jpg)
Anthony Niswonger –
I let a friend borrow my other pump, but I needed to change the oil in my boat. I was skeptical about purchasing this because of the low price, but it arrived overnight and worked just as well as my more expensive one. The tubes came with clamps (with hand tighteners), which made the oil change messless. The value for money is the biggest selling point, and its small size allowed it to fit in the engine compartment easily. I don’t know its durability, but for the price of just over $10, it will be worth it if I get a few oil changes out of it.
Ed Gernertt –
Works ok
Payam Gharavi –
I’m not sure if this pump was used before or not it looked used. I tried to use this pump to pump out 0W-20 and it couldn’t pump it more then about 6 inches in the tube. Very cheap and I wouldnt recommend this to anyone, it’s just a waste of time.
Eric B. from Newton –
This little pump did exactly what we needed it to do: Extract used engine oil from above via the dipstick tube. Assembly was quick and easy: Attach the smaller diameter suction tube to the inlet side of the pump, and attach the larger tube to the discharge side of the pump. (The pump is labeled so that you can determine which side is which.) Secure both tubes with the included hose clamps, and then the pump is ready to go. After running the engine for several minutes to get it up to temperature (you want the oil to be warm but not too hot), you shut the engine off, then attach the pump’s wires to the positive and negative terminals of the battery (or the jump start terminals if your battery is not located near your engine). Then insert the suction tube into the dipstick tube as far down as you can go and put the discharge tube into a container for holding the waste oil. Flip the switch and watch the oil move through the tubing and into your container. For us, pumping out about 7 quarts of oil took less than 10 minutes.
Cleanup was the trickiest part – there will be a little bit of oil trapped inside the tubes as well as the pump. We found that by disassembling everything after the pumping process was complete and then allowing the tubes to hang as they dripped out the last of the oil worked pretty well. A few paper towels later, everything was reasonably clean.
Note that these tubes will stiffen up quite a bit if you are attempting an oil change in cold weather, at least until the warm oil starts pushing through. Plan ahead and position the tubing as needed before it loses flexibility in the cold.
KADIR –
I bought it for I can fix the important maintenance of my car. But I m disappointed. Because it was broken. When I m using, it flowıng oil at the edge of out hole. All my cars engine was dirty with oil. I have wanted return but missed 30 days return time. I bought a broken equipment wit my money!
Dave Wettlaufer –
Works good
Dave Wettlaufer –
Works
Keith –
Pump works well. Easy to use