Frete Grátis em todos os produtos
### Descrição do Produto
O Start Relay uxcell 4.7 Ohm é um componente essencial para o funcionamento eficiente de refrigeradores, projetado para garantir que o compressor inicie e opere de maneira confiável. Com uma resistência de 4.7 Ohm e uma potência recomendada de 250W e acima, este relé é ideal para uma variedade de aplicações em sistemas de refrigeração. Sua construção em plástico de alta qualidade e a cor preta conferem não apenas durabilidade, mas também um visual discreto que se integra facilmente ao design interno do seu eletrodoméstico.
Com dimensões compactas de 3.2 x 2.1 x 2.9 cm (1.3” x 0.8” x 1.1”), o Start Relay é leve, pesando apenas 14g, o que facilita sua instalação em diferentes modelos de refrigeradores. Este relé possui um único pino, simplificando a conexão e garantindo uma instalação rápida e sem complicações. A eficiência deste produto é um diferencial que o torna uma escolha popular entre técnicos e entusiastas de reparos em eletrodomésticos.
### Instruções de Uso:
Para utilizar o Start Relay uxcell 4.7 Ohm, siga os passos abaixo:
1. Desconecte a energia: Antes de iniciar a instalação, certifique-se de que o refrigerador está desconectado da fonte de energia para evitar choques elétricos.
2. Remova o relé antigo: Localize o relé de partida antigo e desconecte-o cuidadosamente, anotando a posição dos fios para facilitar a instalação do novo relé.
3. Conecte o novo relé: Insira o pino do Start Relay na mesma posição do relé antigo, garantindo que esteja bem fixo.
4. Teste o funcionamento: Após a instalação, reconecte o refrigerador à energia e verifique se o compressor inicia corretamente. Se houver problemas, revise as conexões.
### Características do Produto
– Nome do Produto: Start Relay
– Resistência: 4.7 Ohm
– Potência: 250W e acima
– Número de Pinos: 1
– Dimensões Totais: 3.2 x 2.1 x 2.9 cm (1.3” x 0.8” x 1.1”)
– Material: Plástico
– Cor: Preto
– Peso Líquido: 14g
– Pacote: 1 x Start Relay
Este relé se destaca pela sua resistência e confiabilidade, sendo uma solução ideal para quem busca um produto que não apenas atenda, mas supere as expectativas em termos de desempenho e durabilidade. A simplicidade na instalação e a compatibilidade com diversos modelos de refrigeradores fazem do Start Relay uxcell uma escolha inteligente para manutenção e reparo.
### Perguntas Frequentes (FAQ)
Pergunta: O Start Relay é compatível com todos os modelos de refrigeradores?
Resposta: O Start Relay uxcell é projetado para ser compatível com a maioria dos refrigeradores que utilizam relés de partida com especificações semelhantes. É sempre recomendável verificar as especificações do seu modelo antes da compra.
Pergunta: Como posso saber se o relé de partida do meu refrigerador está com defeito?
Resposta: Sinais de que o relé de partida pode estar com defeito incluem o compressor não ligando, ruídos estranhos ao tentar iniciar ou o refrigerador não resfriando adequadamente. Se você notar esses sintomas, pode ser hora de substituir o relé.
Pergunta: É difícil instalar o Start Relay?
Resposta: Não, a instalação do Start Relay é bastante simples e pode ser realizada por qualquer pessoa com conhecimentos básicos de eletricidade. Siga as instruções de uso para garantir uma instalação correta.
Pergunta: O que devo fazer se o relé não funcionar após a instalação?
Resposta: Se o relé não funcionar após a instalação, verifique se todas as conexões estão firmes e corretas. Caso o problema persista, pode ser necessário consultar um técnico especializado.
Pergunta: Qual é a garantia do produto?
Resposta: A garantia do Start Relay uxcell varia conforme o vendedor, mas geralmente é de 30 dias para defeitos de fabricação. Consulte o vendedor para mais detalhes sobre a política de garantia.
Yvonne –
Fridge is now working well.
Lance R. –
I work maintenance at a high school. One day, I noticed a magic chef mini fridge marked trash on the loading dock. Out of curiosity, I brought it into my shop. I went on my laptop, and watched some videos on YouTube,on common issues/ troubleshooting. So I got out my trusty multimeter, and set it to the ohm function,and began testing. I removed both the starter relay, and the overload protector, and tested the compressor. The compressor is normally the deal breaker, because it costs as much as a new fridge, if not more! But when I tested the relay, I found my problem. Because the two parts are frequently ordered together, I just went ahead and ordered them both, for around $12.00. When I received the parts, it literally took me longer to open the package, than it did to install them! I anxiously plugged it in, and it came to life! I must admit, it’s convenient to have a fridge in my office now. I love YouTube, and Amazon! For those who think that this may be out of your wheelhouse, think again, it’s simple! You don’t necessarily need a multimeter. Watch a couple of videos, take a few pics when you unplug the two parts, order the correct parts on Amazon, and put it back together. If it doesn’t work, you can always return them for free! I hope that this helps, and that you’re successful. A fridge is a terrible thing to waste!… lol
Handy One –
Was a perfect replacement for blown one. Able to have my apartment size refrigerator up and running again.
Robert H –
Fixed my Vinotemp VT-36S I got from Costco a few years ago. I’d only had it a few years, and one day it started making this weird clicking noise every few minutes that sounded a little like someone thwapping the side of a propane tank. Once this started happening, it would no longer cool, and the compressor would get quite warm. I assumed the compressor had gone bad, and had resigned myself to finding a new fridge, but it seems the vast majority of small fridges like this get bad reviews, or else cost an astronomical sum, so I hesitated. One day, I decided to do some more research on repairing the VT-36S and found that the clicking was symptomatic of a bad starter relay/sensor like this one. Apparently, the compressor has 2 coils, one to start it up, and one used to keep it running. This relay sits on the side of the compressor and has a ceramic disc inside which has some thermo-electric properties that enable it to sense the temperature of the compressor and turn off the start coil as it gets warm. In my fridge, the ceramic disc had shattered, which I hear they are prone to do after a while. At that point, it no longer does its job, and the compressor just gets hot, and then turns off due to an over-temperature sensor that these fridges also tend to have. So, the compressor can never do its job. It was pretty easy to unplug the wires on the relay on my current fridge, pull it off the terminal on the compressor that it sits on, and then pop on the new one and reconnect the wires. Then, I plugged in my fridge, and voila! It started working again! It took a while to get back down to the set temperature, but it’s still working now months later. I got a couple of extras just in case this part goes bad again. Be sure to get the right resistance for your fridge. This one is a QP2-4R7 or QP2-4.7, which is a 4.7 ohm type.
K. Wade –
The media could not be loaded.
When our chest freezer stopped working, I found a YouTube video detailing how to replace a simple relay. The video linked to this product on Amazon, so I ordered it. It was simple to install, and would probably work with most any freezer or fridge if you hear a clicking sound but no cooling is happening. For a few dollars I saved the hundreds. A repair company probably would have charged over a hundred dollars to do what I did for myself, thanks to YouTube and this little relay.
Nupe582 –
I have just gotten my Hinsense mini fridge from Walmart a bit over a month ago. Sadly my mini fridge had started leaking and completely shut off. I heavily contemplated tossing it and purchasing a new one because I could not find my receipt for the damage protection I brought for it when I payed in store. Instead of tossing my fridge I decided to research some youtube videos that were about 5-10 minutes in length. Youtube does wonders for anything honestly! I found that most mini fridge problems come from the “Starter Relay”. I am a 21 year old female and I don’t know much about technician or plumbing but might I say if I can follow those videos, uninstall the old starter relay and reinstall a new one practically any adult or teen can! This mini device was all I needed to get my mini fridge operating again! No need to toss a perfectly fine fridge or think about getting a new one. Before you toss it try, $10 well spent.
kzynky –
突然冷えなくなった冷凍ストッカーの修理に使用。外して付けるだけで復活。
M. Markwardt –
My nearly 15-year-old Frigidaire compact refrigerator suddenly stopped working. I went to YouTube to research a fix and found a video recommending swapping out this particular part and providing a link to this product on Amazon. Swapping it out takes less than 5 minutes. You only need a small screwdriver to pry off a cover under which it is located. The rest is just snapping it into place. Started the fridge up and it now works just fine again. Thanks YouTube and thanks Amazon!
Carter –
Acquired a Beverage Center mini wine cooler from my future son-in-law who told me the compressor had gone bad. I almost didn’t take it thinking to myself why in the heck do I want a burned out cooler, knowing I didn’t really have time to fool with it. Sure glad I took the chance. Upon removing the relay it gave me the telltale rattle of a bad relay. Found this here on Amazon after checking the numbers on it and, lo and behold, the cooler fired up and has worked flawlessly ever since. Btw, I also replaced the overload capacitor since I had it apart to be sure I would have worry-free operation. Only drawback I had was it took a couple of weeks to come in due to it having to come from China but it arrived on time.
John Doe Yo –
Brought my bar fridge back to life at a good price.