Frete Grátis em todos os produtos
### Descrição do Produto
O motor e conjunto do regulador de janela TYC 660252 para o lado esquerdo da frente é a solução ideal para proprietários de Ford Mustang fabricados entre 1994 e 2004 que buscam um desempenho excepcional e confiabilidade em suas janelas elétricas. Este produto é oferecido como um conjunto completo, proporcionando uma intercambialidade incomparável e conveniência nas reparações. Com um design que se alinha perfeitamente às especificações originais do equipamento (OE), o TYC 660252 garante um ajuste preciso, configuração estrutural robusta, força e torque adequados para um funcionamento eficiente.
O motor específico para cada aplicação (não universal) assegura uma eficiência operacional ideal e uma saída de potência que atende às exigências dos usuários mais exigentes. Todos os componentes são 100% novos e fornecidos por um fabricante de renome mundial, garantindo a qualidade e a durabilidade do produto. Além disso, o TYC 660252 é equipado com um sensor anti-pinch e um mecanismo de auto-retração (quando aplicável), que assegura a segurança dos passageiros durante o uso.
### Instruções de Uso:
Para instalar o motor e regulador de janela TYC 660252, siga estas etapas:
1. Desconecte a bateria do veículo para evitar qualquer risco elétrico.
2. Remova o painel da porta do lado esquerdo da frente, utilizando as ferramentas adequadas para não danificar as peças.
3. Desconecte o motor e o regulador de janela antigos, tomando cuidado para não danificar os conectores.
4. Instale o novo conjunto TYC 660252, conectando-o aos pontos de fixação e aos conectores elétricos.
5. Recoloque o painel da porta e reconecte a bateria.
6. Teste a janela para garantir que o motor e o regulador estejam funcionando corretamente.
### Características do Produto
– Compatibilidade: Projetado especificamente para Ford Mustang 1994-2004.
– Montagem Completa: Inclui motor e regulador, facilitando a instalação.
– Componentes Novos: 100% novos, garantindo qualidade e durabilidade.
– Sensor Anti-Pinch: Protege os passageiros contra lesões durante o fechamento da janela.
– Mecanismo de Auto-retração: Aumenta a segurança e a funcionalidade do sistema de janelas elétricas.
– Eficiência Operacional: Motor específico para cada aplicação, otimizando a performance.
### Perguntas Frequentes (FAQ)
Pergunta: O TYC 660252 é fácil de instalar?
Resposta: Sim, o TYC 660252 é projetado como um conjunto completo, facilitando a instalação. Siga as instruções de uso para uma instalação segura e eficiente.
Pergunta: Este produto é compatível com outros modelos de Mustang?
Resposta: O TYC 660252 é especificamente compatível com Ford Mustang de 1994 a 2004. Para outros modelos, recomenda-se verificar a compatibilidade.
Pergunta: O que é o sensor anti-pinch?
Resposta: O sensor anti-pinch é uma característica de segurança que impede que a janela feche se detectar um obstáculo, protegendo os passageiros de possíveis lesões.
Pergunta: Os componentes são realmente novos?
Resposta: Sim, todos os componentes do TYC 660252 são 100% novos e fornecidos por um fabricante de renome mundial, garantindo qualidade e confiabilidade.
Pergunta: O que devo fazer se a janela não funcionar após a instalação?
Resposta: Se a janela não funcionar após a instalação, verifique as conexões elétricas e a instalação do motor. Se o problema persistir, consulte um profissional para diagnóstico.
Tanner –
Put in a 2001 Mustang Drivers Side works like the original at 30% of the cost at the local parts stores. Get this part if you are looking for a replacement you wont be upset you did.
BB –
Works. Little pain to install , but works as it should. Dont forget to add extra grease where needed and udjust stop bolts if needed.
Francis Wright III –
Perfect fit in my daughter’s 2002 Mustang convertible and works great! No instructions, but there’s a good Youtube video that walks through the process. One comment, if after removing the existing hardware you’re having trouble removing the old mechanism from the door holes, don’t go crazy like I did trying to hammer it out, it won’t work! Have a helper move the window around, it’ll take the pressure off the old mechanism and it’ll slip out of the holes easily once that’s done. Other than that it was a very smooth and easy replacement. The Youtube video covers how to replace the mechanism without removing the bottom rail from the window, I highly recommend that as it makes the replacement a lot quicker.
Kamuela –
Not too bad to install, either. There are several videos on line for the install. One trick; don’t remove the window like the Hanes manual says to do, just get a buddy to hold it while you swap regulators. If you bend the stop tab on the old track at the bottom of the window out of the way, and do the same on the new part (obvious when you see the part and/or a video), you can save drilling out the rivets, removing the stops and having to re-adjust the window, etc. Cuts the time to less than an hour. Much less if you are good at removing the door panel. You will need a phillips screwdriver, a medium sized slotted screwdriver to bend the tab, and I think a 13mm wrench (could be wrong on the size) to remove the old regulator and install the new one. And a helper, who only has to stand there and hold the window from dropping on your fingers. Pick somebody who likes you, though. This is way easier than replacing the Chrysler van regulator I did a few months ago; that was miserable. This one actually fits in the door without acts of magic or desperation.
This part is identical to the one I removed (except, of course, that this one works), is quick and quiet, and about half the price of the OEM part. For all I know, this is the OEM part; TYC makes lots of OEM pieces.
Like most of the car parts I’ve gotten from Amazon, a clear bargain, and it got here faster than if I’d ordered it from a parts house. Super highly recommended if your window goes down and stays there until you bang on the door. Funny how they never fail in the ‘up” position.
Anthony Johnson –
UPDATE: stopped working after about 1 year. NO SUPPORT FROM CO. OLD review: Liked it. I have really no experience and followed a youtube video and did it. Its kind of a pain if you dont know what you are doing and esp if the front part if window falls out if the guide but I got it back in through another yt video. Its been a few days now and its working very well. I prices it at Napa at 150. Took me 4 hours but if the window didnt fall off the front guide then maybe 2.
Carlos Roberto Perez magaña –
Encajo igual al original.funciona d e maravilla.a un mes de colocarlo en mí Mustang 2002.sin ruidos ni nada.👌👌
Shantastic –
Pretty decent for the cost, and my window now works.
“Easy to installl” is rather a funny thing to ask if it was, being that it WAS a power window regulator/motor afterall…
That being said, it was as easy as a window regulator could be. Whole evolution took 2 hours total. Hardest part was feeding those plastic sliders into the guide tracks. (Thanks Ford engineers). I watched a couple of youtube videos, and left the track attached to the window. Did it by myself, using rubber grip quick clamps to hold the window up. Got grease everywhere. I really didn’t see much point in writing a review, except for the warning that the edges are a tad bit sharp and I got a couple of paper cut type slices from handling it. So be careful. That is all.
Rodster –
TYC automotive products are my go to car parts when servicing my customers vehicles. The fit and finish along with the precision of the part rivals that of factory Ford parts. I have no trouble recommending TYC aftermarket parts. However, installing this part takes some skill and patience because you have to remove two rivets holding the window regulator to the glass mounts.
Nberned –
This product did not come with the bolts and nuts to install, delivery was fast but installing without the hardware was a job getting the bolts and nuts to get the job completed.
jsvideojoe –
I have bought other items from this brand before and have always been happy with the build quality of the parts. This one is no exception and works as intended. Some had mentioned problems lining up the holes. That just means your new part needs to be plugged in and moved slightly up or down to adjust to the correct position. Use care doing this so you don’t jam it or pinch a finger. Very small adjustments!
I do have a big problem with how these units are packaged however. My first unit was shipped in the factory box and poked through the sides as well as tearing through one end of the box. The result was damage to the item in transit, prompting a replacement shipment.
This time, the replacement item, in its original box, was placed in another shipping box by Amazon. This arrived safely with no damage to the Amazon box but, again you could see where the item had protruded through the side of the original box ( likely during the original shipment to Amazon ). This one however, did arrive undamaged.
Seems to be a good item as long as it delivers in one piece.