Frete Grátis em todos os produtos
### Descrição do Produto
O Tetra-Teknica MotoBasics Series RHS-01 é um cabo de terminal em anel de 12V projetado para oferecer uma solução prática e eficiente para a conexão de baterias em motocicletas e snowmobiles. Com um plugue de desconexão rápida de 2 pinos, este produto se destaca pela sua versatilidade, permitindo a conexão a uma variedade de carregadores de bateria de manutenção. A sua construção robusta, com fio de cobre de 16 AWG, garante uma condução elétrica eficiente e segura, suportando até 10A de corrente.
Com 2 pés de comprimento, o cabo é ideal para acessar baterias que estão em locais de difícil acesso, proporcionando uma instalação simplificada e rápida. O plugue de desconexão rápida é compatível com a maioria dos trajes aquecidos para motocicletas e snowmobiles, tornando-o uma escolha prática para quem busca conforto e funcionalidade em suas aventuras ao ar livre. Além disso, o cabo vem com uma capa protetora à prova d’água que protege os terminais SAE de 2 pinos contra gotas de chuva e poeira, aumentando a durabilidade e a confiabilidade do produto.
### Instruções de Uso:
Para utilizar o Tetra-Teknica MotoBasics Series RHS-01, comece desconectando a bateria da sua motocicleta ou snowmobile. Em seguida, conecte o cabo de terminal em anel aos terminais da bateria, garantindo que a polaridade esteja correta (positivo com positivo e negativo com negativo). Após a conexão, insira o plugue de desconexão rápida no carregador de bateria de manutenção. Para trajes aquecidos, conecte o plugue ao traje desejado. Após o uso, desconecte o plugue e armazene o cabo em um local seco e protegido.
### Características do Produto
– Comprimento do Cabo: 2 pés (60 cm)
– Material do Cabo: Fio de cobre de 16 AWG
– Capacidade de Corrente: 10A
– Tipo de Conexão: Plugue de desconexão rápida de 2 pinos
– Compatibilidade: A maioria dos trajes aquecidos para motocicletas e snowmobiles
– Proteção: Capa protetora à prova d’água para terminais SAE
– Pacote: 2 unidades por embalagem
### Perguntas Frequentes (FAQ)
Pergunta: O cabo é compatível com todos os tipos de baterias?
Resposta: O Tetra-Teknica MotoBasics Series RHS-01 é compatível com a maioria das baterias de motocicletas e snowmobiles, mas é sempre recomendável verificar as especificações do fabricante da bateria.
Pergunta: Posso usar o cabo para carregar a bateria enquanto está instalada na motocicleta?
Resposta: Sim, o cabo foi projetado para facilitar a conexão a carregadores de bateria de manutenção, permitindo que você carregue a bateria enquanto ela está instalada.
Pergunta: O que fazer se o plugue não se encaixar corretamente?
Resposta: Verifique se o plugue está alinhado corretamente e se não há sujeira ou detritos nos terminais. Se o problema persistir, entre em contato com o suporte ao cliente.
Pergunta: O cabo é resistente a intempéries?
Resposta: Sim, o cabo possui uma capa protetora à prova d’água que protege os terminais contra chuva e poeira, aumentando sua durabilidade.
Pergunta: Qual é a garantia do produto?
Resposta: O Tetra-Teknica MotoBasics Series RHS-01 vem com uma garantia limitada que cobre defeitos de fabricação. Consulte o manual do produto para mais detalhes.
Murray S –
Good price and nice product.
Hardyboy –
After reading some of the reviews of this item I was leary about purchasing it, but for the cost I figured I’d give it a go. The wires are very flexible, I didn’t find them brittle as described by others. I connected one set to my battery, routed it to come up at the seat and tank for my heated vest. Works great.
Chasalz –
I used these to wire a connection to an older Jeep’s battery, so I could easily hook a trickle charger up to it as needed. I picked this one because it has an inline fuse, has a good length to it and comes in a 2 pack. I am very happy with the quality and it has worked well for my application. The only thing I don’t like is it’s very stiff compared to similar ones I got from Shumaker and Battery Tender.
Pros:
– Quality
– Length
– Inline fuse
– 2 Pack
Cons:
– Stiff
Don Hunter –
I bought these to add onto my motorcycles for easy charging and battery maintenance. They work perfectly.
A. Mefford –
We needed an extension to connect our sprayer to our zero turn. This cable was just what we needed. Great price and good quality.
A. Mefford –
The media could not be loaded.
I purchased this to complete a simpler on-shore charging system for my boat, the kit will work for any situation where you need to periodically charge or maintain 12volt batteries.
This were needed to simplify charging my boat on shore. I was tired of crawling under the dash to attach alligator clips in order to charge the batteries. These ring terminals were perfect. They fit just right onto the battery posts, and the SAE connectors make it easy to connect either my solar panel or a land powered charger.
The charging solution I am using this with includes two different charging sources, a Suaoki 60Watt solar and a Noco Genius G3500 Smart Charger. Both are great and provide a similar amount of power to the batteries. The solar charger does not work so well at night though, and the wall charger does not work when out camping on the boat.
Suaoki 60Watt Solar
http://amzn.to/2w1ylpK
Noco Genius G3500
http://amzn.to/2gan697
Using the Suaoki solar charger requires the using of a solar charge controller for safety. The Suaoki can be directly connected to the battery, but then the voltage must be monitored as it can overcharge your batteries and lead to premature failure or worse. I am using the Instapark PWM charge controller for this task and it is a perfect match to the system.
http://amzn.to/2xg7pAW
The NOCO Genius uses properietary connectors and while it comes with a few different options, none of them made it compatible with my requirements. I ordered the NOCO to SAE adapter and now it connects to a standard SAE plug and works well, interchangably with the Solar charger.
http://amzn.to/2wrOxl0
In order to add flexibility in placing the solar panel or connecting the NOCO charger, I added an SAE extension. Essentially this is a 12V extension cord. Any SAE to SAE cable will work provided it has sufficient gauge(AWG). For a 15ft length this should be at least 12AWG with 10AWG or even 8AWG being better. For a 5ft length 16AWG or 14AWG will be acceptable, of course 12,10 or 8 still better. Anything smaller less than those maxiums will degrade the charging capacity as it will cause an significant voltage drop. Here are a couple alternatives that look good.
Kuncan 12ft SAE to SAE
http://amzn.to/2iuIzdu
Tetra-Teknica MotoBasic 10AWG 3 Feet, 2 per Pack
http://amzn.to/2g7VT6S
I used two ring terminal to SAE adapters, one for each battery, as the aligator clamps were problematic and not particularly reliable. The aligator clamps meant that I had to climb into the compartment where the batteries are stored in the boat and almost always insured a good bump on the head. Sometimes I would come back the next morning to find one had fallen off. Using ring terminals insures a secure connection to the battery and allows me to quickly connect/disconnect without bumping my head. I used the Tetra-Teknica MotoBasics 16 gauge 2 feet 10A fused 2 pack for my solution.
http://amzn.to/2w89HlT
In order to charge the two batteries in parallel, I needed to add an SAE Y adapter. The OptiMate Y-splitter worked nicely. I disconnect it when not charging as I do not want power accidentally pulled accross this connection if the boat is using a single battery. I am looking for a solution, a diode that will allow me to keep this connected permanently without that risk.
http://amzn.to/2w1wjG0
The system is working well and keeping my batteries topped off between outings without a problem.
Kurt B. –
It’s long and quality is good. Connectors are a little big but easy to fix.
camaraderie –
Great
Happy Goobie –
These Quick Connect units make recharging a battery so much easier. A much better solution than the alligator type clamps that are usually clipped to the battery terminals. The only recommendation I have is to include a set of 2 5/16″x1″ bolts, 2 nuts, 4 flat washers and 2 lock washers so the quick connect can be affixed to the battery terminals immediately rather than having to run to the hardware store. I have 3 12V batteries all with the quick connect. They are all interchangeable with my emergency generator and my CPAP backup. Recently I purchased another quick connect that I modified so that my CPAP connection no longer uses alligator clips but a quick connect unit. it required cutting off the alligator clips from the CPAP Unit and the terminal ends on the quick connect. Making sure polarity was correct I spliced the two together, soldered them and taped them. My CPAP now has a quick connect rather than alligator clips, making switching to battery in a power failure at night a lot easier with no worry about connections popping off the battery. The only thing I am adding to this review is that I had to purchase another packet of these because one of my batteries positive terminal acid corroded the connector and broke off. The quick connect has made me a very happy camper.
Steve –
Using for trickle charging motorcycle batteries with standard connection without removing batts one opening up compartment. Heavy gauge wiring stands up to road grit. Recommended!