Frete Grátis em todos os produtos
Descrição do Produto: StrongArm 6140PR Toyota Sienna, Liftgate Non Power Lift Support, Par de 2
O StrongArm 6140PR é a escolha perfeita para proprietários do Toyota Sienna que buscam um suporte de liftgate robusto e confiável. Este par de suportes não apenas oferece um encaixe exato, mas também é projetado com tecnologia de ponta que garante um desempenho superior. Com um design de qualidade original (OE), a instalação é descomplicada e não requer ferramentas especiais, permitindo que qualquer usuário realize a troca de forma rápida e eficiente.
A engenharia do StrongArm 6140PR inclui um selo de pistão em O-Ring de borracha, que assegura um fluxo de fluido otimizado através dos componentes de válvula. Isso resulta em um desempenho consistente, mesmo sob condições adversas. O sistema patenteado de Multi-Lobe Seal aumenta a resistência a vibrações e variações de temperatura, tornando este suporte ideal para qualquer clima. Cada unidade é rigorosamente testada individualmente, garantindo que você receba um produto que atende aos mais altos padrões de qualidade e confiabilidade.
Com o StrongArm 6140PR, você pode abrir e fechar o liftgate do seu Toyota Sienna com facilidade, sem se preocupar com falhas ou desgastes prematuros. Este suporte é a solução definitiva para manter a funcionalidade do seu veículo em dia.
- Instruções de Uso:
Para instalar o StrongArm 6140PR, inicie removendo os suportes antigos do liftgate do seu Toyota Sienna. Utilize uma chave de fenda para soltar os parafusos que fixam os suportes. Após a remoção, posicione os novos suportes StrongArm 6140PR no lugar dos antigos, garantindo que estejam alinhados corretamente. Aperte os parafusos até que os suportes estejam firmemente fixados. Após a instalação, teste o liftgate para assegurar que ele abra e feche suavemente. Se houver resistência, verifique se os suportes estão corretamente instalados e ajustados.
Características do Produto:
– Encaixe Exato: Design de qualidade original (OE) para instalação fácil e operação suave.
– Instalação Simples: Não requer ferramentas especiais, facilitando a troca.
– Selo de Pistão em O-Ring: Garante eficiência no fluxo de fluido, resultando em desempenho consistente.
– Multi-Lobe Seal Patenteado: Aumenta a tolerância a vibrações e temperaturas extremas.
– Teste Individual: Cada unidade é testada para garantir desempenho e confiabilidade.
Perguntas Frequentes (FAQ):
Pergunta: O StrongArm 6140PR é compatível com outros modelos de veículos além do Toyota Sienna?
Resposta: O StrongArm 6140PR é projetado especificamente para o Toyota Sienna. Para outros modelos, recomenda-se verificar as especificações do fabricante.
Pergunta: É necessário algum tipo de manutenção para os suportes StrongArm?
Resposta: Não é necessária manutenção regular, mas recomenda-se verificar periodicamente se há sinais de desgaste ou danos.
Pergunta: Qual é a garantia oferecida para o StrongArm 6140PR?
Resposta: O produto geralmente vem com uma garantia limitada, que cobre defeitos de fabricação. Consulte o vendedor para detalhes específicos.
Pergunta: Posso instalar o StrongArm 6140PR eu mesmo?
Resposta: Sim, a instalação é simples e não requer ferramentas especiais, tornando-a acessível para a maioria dos usuários.
Pergunta: O que fazer se o liftgate não abrir ou fechar corretamente após a instalação?
Resposta: Verifique se os suportes estão corretamente instalados e alinhados. Se o problema persistir, entre em contato com o suporte ao cliente para assistência.
Gliderdad –
After going into about 5 auto part stores over a two week period and not having any luck finding them (even had some of the guys take my name and number to call me if they could get them), I decided to order them from Amazon. I should have done this right from the beginning. The price on Amazon was lower than what I was being quoted at the auto part stores. Using Amazon Prime with free two-day shipping and one-click ordering, the purchase was very simple and I had them on my doorstep in 2 days.
Installing them literally took less than 5 minutes. All I needed was a pole to hold up the back hatch and flathead screwdriver. You just use the screwdriver to pry up the metal clips on the old lifts (very easy), pull them out and snap the new ones in place. Anyone can do this. It really couldn’t be easier.
The hatch seems to open higher than it did before so I have much better headroom.
I’ve only had them on for a couple of days so I don’t know how durable they will be, but they seem pretty strong. As long as they last a few years, I would consider this a great purchase.
Brian Holmes –
Great quality, easy fit, well-packaged for shipping by Lift Supports Depot, and great fit on my 2006 Toyota Sienna LE with manual liftgate. Buy TWO of these one-arm packages for your vehicle. These were about 1/4″ (or maybe 3/8″) shorter than the ones I removed, but they function perfectly and the opened hatch is not lower than it originally was, as far as I can tell (however I’m only 5’6″ tall).
This is the exact same part & brand as that offered by my nearby auto parts store, at half the price! Amazon does have some less expensive other-brand versions that I considered, but I couldn’t be certain they’d fit my vehicle, so I went with these StrongArm 6140’s instead. I’m very happy with these. I bought two of these single-unit packs instead of the 2-pack of StrongArm 6140 that is also available on Amazon because it was slightly cheaper.
Note that the installation video and instructions indicate that the shaft end of the lift support should normally be on the bottom WHEN THE HATCH IS CLOSED. On my vehicle the orientation of the lift support changes as you close the hatch: the end that was on top during installation ends up on the bottom when closed. Keep that in mind.
Ann R. –
Great buy! I purchased two of these when my trunk stopped springing open. I was having to hold the trunk open with one hand and use my other hand to remove/put stuff in. These are very easy to install. My husband was able to install by himself in less than 5 minutes. He said he was able to just pop them in without even having assistance. They are just as good than the original ones that were on my 2006 Toyota Sienna. The spring in them is pretty strong, so it is sometimes a little difficult to push down initially, but I think it is just because they are brand new. The trunk opens super quickly and functionally now. I know that if I had brought the van in to the shop to get this done, it would have been expensive, so this was definitely worth the buy. The price and ease of install are the biggest “pros” I would say on this purchase.
Thomas –
So-so product. I purchased 2 lifting arms and only one worked. The defective lifting arm was not able to support very little weight, let alone the weight of the tailgate. After a quick inspection, I was able to see that the arm was able to move in and out with less than 10 pounds of force.
A request was sent for a replacement a day later. I received a response to my request within 3 hours after sending my request. 7 days later, I sent a follow up email asking for the status of my replacement item. Part of the response I received was, “I am not sure what happened with the order.”
After receiving 2 more replacement lifting arms, I quickly realized that one of the two new arms was also defective. To recap, of the four lifting arms I received, two were defective and a total of 12 days were needed to resolve my issue.
Not good. 🙁 Other than that, the product that actually worked is good.
JaphyRyder –
The lift gate on my Sienna would not stay open. It started as general weakness (the hatch wouldn’t stay as high as it had before). Then the supports completely gave out and the door would not lift itself, or stay open. These were a really easy install. Great directions included in the package. It helps to have 2 people to install, so someone can hold the liftgate open, but I just used a piece of 2×4 between the liftgate and the bumper to prop it open while I (carefully) swapped this out. It took less than 10 minutes to change out both supports.
Bret –
It really doesn’t lift the door of my Toyota Sienna very fast in temps below about 40 F. I was also disappointed to find these are about 3/4 inch shorter than the original arms which means the lift gate in open position about 2 inches lower to the ground so taller guys will bump their heads more.
Jason –
Arrived on time. Part was exact fit and easy to install. This cost me a tenth of what the dealer was going to charge.
Alan Brend –
Took all of 10 minutes to install both sides. They are a little stouter than the originals are so door is a little harder t oclose, but very good product.
spectacle –
They are easy to install, but the tension is too high for my 2005 Toyota Sienna. Not sure if I want to keep them or return them at this point.
Amazon Customer –
Easy to install and have had them for over a year. Working excellently.