Frete Grátis em todos os produtos
- [Comprehensive Repair Kit] : Includes 2 flex vane impellers, 2 U-cup seals, 2 housing O-rings, 2 retaining rings, 2 tubes of Super Lube grease, and an instruction sheet.
- [Versatile Compatibility] : Designed to fit older and newer model pump housings, including Shurflo Model 3000 series, Flotec/Pentair “Cyclone” FP0F360AC, Country Line 1/12HP, and Myers MES106 pumps.
- [Durable Construction] : Impellers are made from XNBR (carboxylated nitrile) for outstanding wear and abrasion resistance.
- [Replacement Parts] : Replaces FP003414S and RP0001077 repair kits. Shurflo 94-120-00
- [Easy Installation] : Kit includes all necessary components for a hassle-free repair. Remember to ALWAYS Lubricate your Pump and Never Run Pump Dry. NEVER PUMP FLAMMABLE LIQUIDS.
- [Included Components] : 2 packages of Super Lube Grease Which Reduces Friction During Accidental Dry Running. Super Lube Grease is also Non-Toxic, Non-Staining, USDA H1 Rated, Safe in Potable Water, Impervious to Salt Water, Will Not Dry Out or Evaporate.
- [Important] : Remember to ALWAYS Lubricate your Pump and Never Run Pump Dry. NEVER PUMP FLAMMABLE LIQUIDS.
- [American Owned] :As an American-owned company, we pride ourselves on offering the highest quality aftermarket parts available, with a 100% satisfaction guarantee for your peace of mind.
Cheetah Clutch Friction Disk
*$506.30
3/4"-36 Spline X 3/4" DD Chrome Steering Universal U Joint Single Steering Shaft 83mm
*$433.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
REPLACEMENTKITS.COM -Pump Repair Kit Compatible with Flotec/Pentair, Shurflo 3000, Shurflo 94-120-00, FP0F360AC, MES106, (Replaces FP003414S)
*$397.00
Informação adicional
| Manufacturer | REPLACEMENTKITS.COM |
|---|---|
| Brand | REPLACEMENTKITS.COM |
| Model | FLotec, Shurflo, Shurflo 94-120-00 |
| Item Weight | 0.634 ounces |
| Package Dimensions | 3.5 x 2.72 x 1.1 inches |
| Country of Origin | Taiwan |
| Item model number | Flotec FP003414S Shurflo 3000, 94-120-00 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | FRK-0104 |
| Special Features | Kit Includes 2 packages of Super Lube Grease Which Reduces Friction During Accidental Dry Running. Super Lube Grease is also Non-Toxic, Non-Staining, USDA H1 Rated, Safe in Potable Water, Impervious to Salt Water, Will Not Dry Out or Evaporate., XNBR (carboxylated nitrile) |
| Date First Available | November 7, 2016 |
Amazon Customer –
I ordered this for my Flotec FP0FDC pump and F360DC 5DCMP pump. Before I ordered I asked if it would fit and the seller responded that it does. Well the impeller did my F360DC 5DCMP. pump but it was way too small for my FP0FDC pump and could not use it for that model☹. That’s why the 4 stars.
F. Baratta –
I needed to repair the impeller in 2 Flotec pumps to allow for 3 pumps to continually clear the water from hurricane Ida. I ordered the replacements immediately in the hope that any other problems occurred. PRIME SAVES!!! Soon after, the third pump seized and I needed to change that impeller. This came in 2 days so it was just in time for the fix. I was pumping for 5 days as the pump duration and frequency declined. SO easy to replace. Remove the screws from the head, slide off the cover, pull the impeller and replace. remove and replace the ring gasket which also comes in the kit. Then place the cover over the head and screw it back securely.
Radm Paul Schultz –
While the impellar was exactly the same as the Everbilt 1/12 hp pump, the O-Rings were much larger than the installed OEM O-Ring. I understand this is a universal fit but was hoping for the best.
John H. –
Did a good job, while it worked.
Fix-it Man –
I bought the pump years ago (early 1990’s) at a yard sale. I got the pump dirt cheap as the original owner didn’t know where to put the oil in at. The instructions say pump inlet, so he put the oil down on the carbon brushes. I cleaned up the motor & have been looking for a pump rebuild kit. At that time the kit was $49.98.
Recently cleaning out some of my crap built up from years of collecting and came across this pump. Decided to search Amazon and found this kit, better than the original and the cost of just $19.98 – I bought it. Now the pump is once again back to pumping/transferring water again. And I see Amazon also sells the carbon brushes as well. Looks like I will be getting allot of usage out of this handy 120 volt transfer pump.
Amazon Customer –
Exact same parts needed still works as of today.
benny bennett –
works good
Andrew Pollack –
Nice kit. I just needed the impeller and the kit came with a pair of them, lubricant, and new seals as well. The new impeller fit my flotec pump and the pump is once again moving water.