- 🚗【Compatibility】This automotive rear hatch strut compatible with 10 11 12 13 14 Subaru Legacy & Outback.
- 🚗【Replace Part】This automotive hatch shock replaces vehicle rear lift gate support OEM Part No PM3074L-R,PM3074L,PM3074R,63269AJ00A,63269AJ01A,63269AJ10B,63269AJ10C,63269AJ10D,63269AJ11B,63269AJ11C,63269AJ11D.
- 🚗【Size】Compressen Length:13.18 inches; Extended Length:22.87 inches.
- 🚗【Package Content】It is a pair of 2 pieces which includes left and right sides (with 4 screws).
- 🚗【Installation】There are NO screws or other fasteners required. Just need to use a flathead screwdriver to pry the old bracket and installthe new lift arm on. Before installing hatch parts, prop up your rear heavy hatch by a rod or helper to stay away from harm.
- 🚗【24 Months Warranty】AiYiGu branded automotive hatch strut shocks are covered by the AiYiGu two years warranty to be free of defects in material and workmanship for two years from date purchased. If you have any questions or you are not satisfied with the product, welcome to contact us.


Frete Grátis em todo o BrasilProduto Original Importado dos EUA
Rear Hatch Shocks Struts Lift Gate Supports Gas Springs Compatible with 2010 2011 2012 2013 2014 Subaru Legacy & Outback, Pack of 2 PCS, Replace PM3074L PM3074R
*$460.00
Informação adicional
Manufacturer | AiYiGu |
---|---|
Brand | AiYiGu |
Item Weight | 1.65 pounds |
Package Dimensions | 26 x 3 x 1 inches |
Country of Origin | China |
Item model number | PM3074 L-R |
Manufacturer Part Number | TH-0068 |
Position | Rear |
Date First Available | March 23, 2024 |
DonV –
Installed these in place of OEM Subaru struts with 23 years of use on them. Note the design is different from the Subaru part – there’s one fewer ball swivel, and the bulkhead mounting bracket is reversed re: bracket bend orientation/side of the mount. Note the markings are both “L” in the photos – I put the correct part in place, even though it looks reversed – the new won’t mount the other way around given the hole spacing to bracket bend location. There were no meaningful instructions in the box but just match the stamped letters between the original and new and you’ll be good. The new struts work ok, there’s no obvious binding in the motion of the hatch and the hatch no longer seems to weigh a ton when opening and stays up. 😉
Wyatt Herbivore –
Bought for a 2013 outback. Great fit and easy install. Piston pressure is set great for lift assist. Has worked flawlessly for the last three weeks.
Jesse R Pritchard –
Fit exactly my car.
Sandy Shadrach –
Easy to install and worked perfectly
Dana Marshall –
I read the previous comments about installing it the other way ( different from OEM). But it turns out to be wrong for my Gen 4 2013 Subaru Outback. It ended up scratching the base and will not support the lift gate. Re-installed it exactly the same way as OEM and it worked great. Strong support and slow but steady lift. Will see how it lasts.
Al –
Super easy to install. It’s not until your old ones just stopped working do you realize how long they have been slowly not working well once you install these. They are strong enough to lift the door on their own on a super heavy Subaru outback hatch when just triggering the latch.
Justin –
Worked perfect on my 2012 outback.
John F Averill –
My failing OEM struts were ten times stronger than these struts. In fact my wife asked if I put them on backwards thinking they were forcing it closed – I did not. They are not even close to strong enough to keep the hatch open.
Do not purchase this product for a Subaru Outback.
DonV –
These were surprisingly easy to install and are working great. I was a little intimidated to try replacing my own but I’m glad I did. You should have 2 people to prevent whatever you lifting from falling and injuring the other person.
Grammiebarry –
Great product and value for the money. Super easy installation, works perfectly!