- All-in-One Complete Brake Kit Replacement: eLine Series Front Brake Kit comes with (2) high performance brake rotors and (4) low-dust ceramic brake pads and hardware kit.
- High Performance Brake Rotors: Made of G3000 grade cast iron with zinc finish for ultimate rust protection. Built with O.E.M specifications in mind, no modification required.
- Ultimate Stopping Power: Precision-drilled holes and countersunk design prevents cracking and build up, enhances ventilation and dissipates heat. Designed for smoother and quieter stopping, built for longer lasting, consistent braking performance.
- Low Dust & Noise: Brake pads come with shims to eliminate noise. Low dust, asbestos free special ceramic formulation provides excellent fade resistance. Top choice for front and rear brake pads replacement.
- Compatible Applications for: (2011-2014) Honda Odyssey Front


Frete Grátis em todo o BrasilProduto Original Importado dos EUA
R1 Concepts Front Brakes and Rotors| Hardware Included| Front Ceramic Brake Pads and Rotors Kit| Fits 2011-2014 Honda Odyssey
*$1,802.40
Informação adicional
Brand | R1 Concepts |
---|---|
Vehicle Service Type | Car, Truck, Suv |
Year | 20112014 |
Assembly Required | No |
Orientation | Front |
Automotive Fit Type | Vehicle Specific Fit |
Manufacturer | R1 Concepts |
UPC | 195700063308 |
Model | eLine Series |
Item Weight | 47 pounds |
Product Dimensions | 14 x 14 x 8 inches |
Country of Origin | China |
Item model number | FEC.40109.02 |
Exterior | Silver Zinc Plated |
Manufacturer Part Number | FEC.40109.02 |
Date First Available | January 19, 2018 |
Pierce –
So if your wife is going through rotors like crazy you need these! They have lasted so long for the value they are a must! They install just like stock rotors eliminating vibrations! The dust is minimal and it comes with all hardware!
Lorena Juarez –
Las pastillas de frenado se acabaron en menos de un año. El sistema es bueno solo que las pastillas se acaban muchísimo antes de lo regular.
Morkgto –
I purchased these in March of 2024 and it is now October 2024 (roughly 6-8k miles put on these rotors/pad and they are terrible!. From the begining the front and rear rotors were loud, not just playing card sound which is somehwat typical to these style rotors, but constant rumbling during hard braking. Yesterday I removed a front wheel and noticed that I had less than 50% pad remaining and the rotor was grooved. Seriously disappointed in this set and will never purchase again.
I did not contact R1 based on previous review that they were very difficult in responding to a warranty claim (see previous review by other buyer).
I’m gonna be replacing these soon with a standard quality rotor and pad combo.
Amazon Customer –
Thought I got a fair deal on these rotors. I’ve purchased rotors from this company before with great life out of there products. But I was sorely disappointed in this set of rotors. Had them installed by my mechanic and have had them checked twice and they screech all the time. And have slipped on more than one occasion. Hope the next set change my mind.
JB –
These rotors are priced perfectly and completely changed the stopping of our Odyssey for the better. They look great also. I had complete faith that they would be much safer for the long downhills going from Utah to Cali and AZ often! No worries about overheating which happened to our previous oem set!!!
Unnikrishnan Anat –
Pros:
Good stopping power
Quiet and smooth breaking
No warping of the rotor so far. My previous rotor was warped and caused a lot of vibration when breaking.
Cons:
Break pad makes a lot of dust.
Clips that came with the break pad doesn’t fit.
The break vibrates and make noise the first few breaking. After that it goes away.
Lorena Juarez –
I am satisfied with the quality and performance of this product. I think it was a very good choice.
Wilderness Girl –
They work well but have super loud screeching issues everything I come to a stop I sprayed them down with brake cleaner and the scree thing stopped for a bit but came almost right back, that’s the only bad part but they work really well for stopping power. Installed on my 2013 honda odyssey touring elite.
Dan –
Honestly these are miles better than the factory parts. My factory rotors warped in 4 months.
I installed these myself and I realized why they warp. The factory design has spring clips on the outside of the pad to push the pads away from the rotor, but it does not push the inside of the pad away. Because of this, the inside of the pad stays in contact with the rotors as you drive and cause them to warp.
I prefer to install pads with permeated high temp grease (the one with aluminum in it) on the backs of the pads, and on the parts of the calipers that come in contact with the pads. This will reduce any vibration and doubles as a way of adhering the pad to the caliper without having to glue them.
I also used a product called “Kent – Brake Silencer” in order to burn off any film on the rotors and create an optimal bedding process for the brake pads and rotors.
It is so satisfying to hit the brakes on my car now, it’s smooth as silk, and one of the other major differences is that now I hear the tires under braking because these bite so much harder than the factory pads. I was originally at the point of shopping for a new car because I was so frustrated with the poor brake design on this van, but now it’s so nice, I’ll hang onto it for a while longer.