Frete Grátis em todos os produtos
Descrição do Produto: Suportes de Elevação QiMox para Porta Traseira do Toyota 4Runner
Os Suportes de Elevação QiMox para a Porta Traseira do Toyota 4Runner são a solução ideal para quem busca eficiência e praticidade na abertura e fechamento do porta-malas. Compatíveis com modelos de 2010 a 2023, esses amortecedores são projetados para oferecer um desempenho superior, garantindo que a sua experiência com o veículo seja sempre a melhor possível.
- Posicionamento no Veículo: Liftgate
- Comprimento Estendido: 22.56″ Comprimento Comprimido: 15.79″
- Fácil instalação: Com ferramentas manuais simples, a instalação pode ser realizada em apenas alguns minutos.
- Atende ou excede as especificações do fabricante OEM: Proporciona levantamento fácil e reduz o esforço de fechamento.
- Importante: Leia atentamente o título para garantir que você está pedindo os suportes corretos e na quantidade desejada.
Os suportes de elevação QiMox são projetados para atender ou até mesmo superar as especificações dos fabricantes originais, oferecendo uma experiência de uso sem complicações. Com um comprimento estendido de 22.56 polegadas e comprimido de 15.79 polegadas, esses amortecedores garantem que a porta traseira do seu Toyota 4Runner se abra e feche com facilidade, reduzindo o esforço necessário para manuseio. A instalação é simples e rápida, permitindo que você substitua os suportes antigos sem a necessidade de um mecânico, economizando tempo e dinheiro.
- Instruções de Uso:
Para instalar os Suportes de Elevação QiMox, siga os passos abaixo:
1. Abra a porta traseira do seu Toyota 4Runner.
2. Remova os suportes antigos, utilizando uma chave de fenda ou uma chave inglesa, conforme necessário.
3. Posicione os novos suportes QiMox nos pontos de fixação, assegurando que estejam alinhados corretamente.
4. Aperte os parafusos até que os suportes estejam firmemente fixados.
5. Teste a abertura e o fechamento da porta para garantir que os suportes estejam funcionando corretamente.
Características do Produto:
– Compatibilidade: Projetado especificamente para Toyota 4Runner de 2010 a 2023.
– Material de Alta Qualidade: Fabricado com materiais duráveis que garantem longa vida útil.
– Desempenho Superior: Proporciona um levantamento suave e eficiente, minimizando o esforço necessário para operar a porta traseira.
– Instalação Rápida: Não requer ferramentas especiais, tornando a substituição acessível a todos.
– Design Ergonômico: Facilita o uso diário, ideal para quem utiliza o porta-malas com frequência.
Perguntas Frequentes (FAQ):
Pergunta: Os suportes são compatíveis com outros modelos de veículos?
Resposta: Não, os Suportes de Elevação QiMox são especificamente projetados para o Toyota 4Runner de 2010 a 2023.
Pergunta: É necessário algum tipo de ferramenta especial para a instalação?
Resposta: Não, a instalação pode ser feita com ferramentas manuais simples, como uma chave de fenda ou chave inglesa.
Pergunta: Qual é a garantia oferecida para os suportes?
Resposta: Os Suportes de Elevação QiMox vêm com uma garantia limitada que cobre defeitos de fabricação.
Pergunta: Como posso saber se os suportes estão funcionando corretamente?
Resposta: Após a instalação, teste a abertura e o fechamento da porta traseira. Os suportes devem permitir um movimento suave e sem esforço.
Pergunta: O que devo fazer se os suportes não se encaixarem corretamente?
Resposta: Verifique se você adquiriu o modelo correto e se a instalação foi feita corretamente. Se o problema persistir, entre em contato com o suporte ao cliente para assistência.
CM –
Easy to install on my 4Runner, works well, feels strong in terms of lifting power, and no leaks. I would buy them again.
Hammer –
This strut is exactly as described, easy to install and works great. The only thing I did was install add a washer, before installing the ball. The original had a washer that could not be removed from the ball I took off, but a trip to the hardware store took care of that. It probably would have worked without the washers, but it helps distribute the pressure around the ball.
Great price for this item. Hopefully it lasts as long as the original one, which is 19 years.
TXJaxon –
Update:
These started out working just fine but of course, just outside my return window they begin to fail already. 30 days in and they don’t have enough power to lift the hatch at all. Can’t recommend.
Original:
Bought these for a 2011 Toyota 4Runner and they were a direct replacement. They’re a little slower on the lift than the ones they replaced, but they do the job well without slamming the trunk open. Plenty of power to lift the trunk and super easy to install. Fit just like OEM.
MachMyDay –
I just installed these on my wife’s Lexus GX470. Here’s the procedure. Prop the hood open (I used an extendable snow brush). Use a 12MM box wrench to remove the upper stud on ONE side of the hood. Removing the top first makes it easier to swing the strut out of the way to get at the bottom stud. Remove the bottom stud with the strut attached. Install studs on the top and bottom holes (note: the OEM struts have a metal washer built into them that cannot be removed). When installing these replacement studs, you could use a 12MM socket to speed up the installation. I found some spare washers and used them, but you would probably be fine without them. Pop one of the struts on to the bottom stud (note the orientation – the cylinder is on top – look at the other side with the OEM strut still installed if you are confused). Pop the top of the strut on to the upper stud (the head on it swivels for alignment). At this point, the new strut alone was able to hold my hood up, but I would still use something to keep the hood from falling down. Install the other side in the same manner. I hope this review helps you out.
Jk 2018 –
Excellent product
Janet R. –
I needed to replace these for the first time and the reviews definitely steered me in the right direction. Easy to put on, strong, amd lifts better and higher than the original. Mind blown! Just buy them!
Bo’s Dad –
These are amazing! But, getting the old bolts out to install these was very hard! The old bolts were really rusted on the top and one was super hard. I had to have a friend help. He ended up having to use a hack saw to get the knob off the old bolt as we rounded the old bolt head trying to get it out. We used some locking plyers and eventually got it out, but it slipped a few times and he has a very strong grip! The first thing you should try before you order these, is take a #12 wrench and see if you can get the top bolts to even move on the bottom of your hood. If you can’t then ask some friends or someone good with autos if they can help, because if you can’t get the old bolts out you will not be able to install these new hood struts. These work way better than the old OEMs I had, although they are almost 20 years old to be fair. I was worried I was going to have to take my 4Runner to a shop to have them install new struts for the hood, and of course they may not allow outside parts. The one I use will not allow outside parts. If I did not have a friend who is handy with autos to get the bolts loose, I would have had to return these struts as I would have had no way to install them.
Also, DO NOT put the rounded bolts into the slots in the struts until AFTER the bolts are installed! Sounds simple, but I did not realize as easy as it was to put the rounded bolt end in the strut before I had installed it, once that thing goes in, it will not come out! Thankfully my friend was still able to install that in the top of the hood, but it was much harder than it would have been had I not done that.
Once the old bolts are out, you will screw the new bolts with this kit into the old holes, the best way to do it is with a socket wrench set, 12mm, but it has to be a long socket to go over it or it won’t fit on. You can use a regular wrench to screw it on, but it will be much easier to use a socket wrench 12mm!
Once the new bolts are in, you just slip the struts over the bolt ends that are rounded, and they go in pretty easy, and then that’s it!
Also, you will not be able to compress these struts with your hands, they are way to strong. But, once they are installed, slowly pull the hood down evenly on both ends, and then it will slowly start to go down. Maybe the OEMs worked this smooth a long time ago, but my old ones would hold it up, but going up or down you had to hold them and move them. These new ones, they go up slowly on their own, almost like a garage door being pulled up, and when you pull the hood down, you have to keep pulling it down slow. My old ones were so old, that it would slam down on its own once it started going down if I did not slowly lower it. But, these new ones, they go down slowly on their own, like a garage door! And to close the hood, I then have to push it down for it to latch.
These are really nice. I read some of the other reviews and they said the ends are plastic, they may break, and that may be true down the road, I do not know. The old OEM ones are metal. But, one thing I think I do like about these is that down the road, it will be easy if these start to fail, to just use a hack saw and saw off the plastic ends. I can then just buy a new one, and snap then right on the metal bolt ends I just installed. That was the hardest thing, really the only hard part, getting the old bolts out.
I think I like these new ones have plastic ends, as I can just hack saw the plastic off if the struts go bad, and pop on new struts. The only metal ones made that impossible to do. I gave 5 starts for easy to install, because the product is easy, but getting the old bolts out was really hard, so the install process is not easy at all, but that is not the fault of this product.
That is why you will want to be sure you can get the old bolts out before you order these struts, or any struts, if you can not get the old bolts out, then you will be unable to install this or any other strut set. You will be better off just calling around town to get bids on shops to replace the struts for you.
J. Neill –
So far so good👍
Nathan C –
They fit my 2016 4Runner perfectly and were fairly easy to install. They don’t raise the rear hatch as fast as the original OEM parts, but they work. I’m satisfied with the product according to cost.
lico chan –
Ok