Frete Grátis em todos os produtos
Descrição do Produto: Proje Ceramic Coating
A Proje Ceramic Coating é a solução definitiva para quem busca proteção e brilho duradouro para veículos. Com uma fórmula avançada de nano SiO2, este revestimento cerâmico transparente oferece uma proteção excepcional contra produtos químicos, intempéries e raios UV, além de repelir manchas de água, sujeira e outros contaminantes. A segurança do produto é garantida em todas as superfícies externas, tornando-o ideal para carros, caminhões, trailers e muito mais.
Fórmula de Longa Duração
A Proje Ceramic Coating proporciona uma proteção que dura mais de 12 meses, mesmo nas condições mais severas. Ao ser aplicada e mantida corretamente, a fórmula não se desgasta após várias lavagens manuais ou chuvas intensas. O revestimento se liga às superfícies externas, criando uma barreira de proteção robusta e duradoura.
Barreira de Proteção Forte
O selante SiO2 oferece uma barreira resistente contra elementos agressivos como água, sujeira de estrada, lama e outros detritos, graças à sua hidrofobicidade avançada e suavidade sedosa. Isso torna o produto perfeito para proteger a pintura, vidro, faróis, rodas, acabamentos e cromados.
Solução Fácil de Usar
A aplicação da Proje Ceramic Coating é simples e prática. Basta aplicar o produto em uma esponja de microfibra limpa e começar a aplicar a esponja umedecida na superfície externa do carro em um padrão cruzado, painel por painel. Após 2 minutos, o produto deve ser polido para remover o excesso.
Múltiplas Aplicações por Lata
Com um frasco de 16 Fl Oz, a Proje Ceramic Coating pode ser reaplicada de 10 a 15 vezes, sendo recomendada a aplicação após a lavagem do carro e correção da pintura.
—
Instruções de Uso:
1. Lave e seque completamente o veículo antes da aplicação.
2. Utilize um desengraxante para remover qualquer resíduo de cera ou contaminantes.
3. Aplique a Proje Ceramic Coating em uma esponja de microfibra limpa.
4. Aplique em um padrão cruzado, um painel de cada vez.
5. Deixe o produto agir por 2 minutos.
6. Use uma toalha de microfibra limpa para polir e remover o excesso.
7. Repita o processo em todos os painéis do veículo.
8. Para melhores resultados, evite lavar o veículo nas primeiras 24 horas após a aplicação.
—
Características do Produto:
– Tipo: Revestimento cerâmico nano SiO2
– Durabilidade: Até 12 meses
– Aplicação: Fácil, com esponja de microfibra
– Volume: 16 Fl Oz (aproximadamente 473 ml)
– Reaplicações: 10 a 15 aplicações por frasco
– Hidrofobicidade: Alta, repelindo água e sujeira
– Compatibilidade: Seguro para todas as superfícies externas (pintura, vidro, plástico, metal)
– Proteção UV: Sim, protege contra danos causados por raios solares
—
Perguntas Frequentes (FAQ):
Pergunta: A Proje Ceramic Coating é segura para todas as superfícies do meu carro?
Resposta: Sim, a Proje Ceramic Coating é segura para todas as superfícies externas, incluindo pintura, vidro, plástico e metal.
Pergunta: Quanto tempo dura a proteção após a aplicação?
Resposta: A proteção dura até 12 meses, mesmo em condições severas, desde que aplicada e mantida corretamente.
Pergunta: Posso aplicar o produto em um dia chuvoso?
Resposta: É recomendável aplicar a Proje Ceramic Coating em um dia seco e ensolarado para garantir a melhor adesão e eficácia.
Pergunta: Quantas vezes posso reaplicar o produto?
Resposta: Um frasco de 16 Fl Oz permite de 10 a 15 reaplicações, dependendo da área a ser coberta.
Pergunta: O que devo fazer se o produto não estiver aderindo corretamente?
Resposta: Certifique-se de que a superfície esteja completamente limpa e livre de contaminantes. Se necessário, utilize um desengraxante antes da aplicação.
SCABHUNTER –
easy to apply. gives very good results. Need more time to determine durability. So far so good.
Suspense –
I just applied my first coat of Proje’ Ceramic Coating to my 2014 Chevrolet Sonic. This car lives outdoors and needs UV protection. Seeking a durable finish, I thought of giving Proje’ a try – and I’m very glad I did. First, I clayed the surface as recommended in the instructions, a practice I follow anyway, and then applied Proje’ on a test surface – the sideview mirrors. The application is so easy! The viscosity is like water and it just glides on and achieving an even coat is easy. I allowed proper dry time, and buffed. What amazing results! I did not polish the surface and my paint is nearly 6 years old and it looked just fantastic on the mirrors, so I progressed to complete the entire vehicle.
Buffing gave me the impression that there is a finish being applied. It’s not difficult – on the contrary comes off nicely, just change microfiber towels as they load up – it just gives you the impression you’re applying a finish that I find satisfying. My cloud cover turned to rain just as I completed, and it beaded well.
Net review – thus far I’m very impressed with this Proje’ coating. It went on very easily, buffed well, and delivers a superior shiny finish on my car. I’m really anticipating a lasting durable protective finish which will round out my positive experiences with this product. I highly recommend it.
Michael –
Intial glossy finish. Car looks great. Minimal dust attraction though some does get attracted. It is not 9H nor 10H I gather more like 7H but still good. I applies inside doors & on door pannels & Dask board. Where I missed one could tell with dust / road mud collection. Used Microfiber cloth with spong behind to apply. Used Clean microfiber cloth to bring to take of excess. Cloths did get dirty no big issue. On old cars professional rubbing & buffing necessary first – not too expy in india.
William –
Easy to use. Wipe on wipe off after 30 to 40 seconds. Two months went by and still going strong.
Don’t like to wash your car often, then let the rain wash it off.
I applied it on my son in-laws car and so far so good. It looks glossy, shiny. Technology came a long way. No need to spend thousands on a coating. I applied this to a older un-maintained car and it did wonders.. of course I cleaned it throughly and gave it a light polishing without any waxes & sealants then used 50/50 alcohol & distilled water to remove any residue from the polishing.
The end results were very satisfying.
I’ve read some of the other reviews and found that they are applying this and other ceramic coatings incorrectly.
You have to wash your car with a car soap that doesn’t have any wax, ceramic or what ever they can conger up to put in these car soaps. If you do use car soap with other stuff in the soap, you will never get the ceramic coating to bond to the paint. You’ll be getting layers of wax, sealants and ceramics in between this coating and will create a combination of chemicals that will not work well with each other and cause a chemical reaction that can be a major problem. Hopefully it won’t explode.
Marcos Paez –
2007 montero Limited mitsubishi first I always wax my car. I just prep de surface using my polishing machine with rubbing compound turtle wax second step with machine ceramic wax by simoniz when I was done I clean all with microfiber towels and wait till the next day I apply one coat of this ceramic proje like indicated I really love the shine however the following day apply a second coat and this is the result. Is not looking so durable but I love the easy removal much easier than other ceramic coatings and the shine is just perfect. It shines just perfect.
William –
This product brought out the deep luster in my wife`s 2015 Buick Enclave more than i had expected, its been about 4 days and still has the deep shine,
I applied 2 applications of the Ceramic coating and you can def. tell that there is a hardness to it once it has fully cured, i applied it with a micro-sponge applicator in quarter sections with a 10min cure time before buffing the section i applied it to, for the second coat i waited about 30min. and then repeated the process, >>> and a little goes a long way so dont over apply if using a sponge applicator pad, FYI i would recommend gloves as it is a very thin liquid with a chemical smell and it burns a bit if splashed onto your skin, but the smell goes away after curing so not a big deal.
once dry i sealed it with 2 coats of Wet-Gloss wax with anti-static features and its amazing to look at the renewed paint on this vehicle.,
I would like to add i did all the proper prep work of washing, clay bar and final rinse before starting.
Basically this is very easy to apply and so far works as promoted to bring a brilliant shine back to the paint, and there is plenty of product left over for about 4-5 more applications as you use so little but it goes a long ways. impressive product.,
Would very much recommend this to anyone wanting a solid ceramic product.
UPDATE:
It`s now been a solid week since my initial review.
1) it has rained 2x , it sites outside at my wife`s parking lot unprotected for the elements to do their best.
the first rain left drops of water on the hood and various other parts, but the shine was as if I had put it on today, I simply spray detailed the car after drying up the water, no dry water marks were present so a quick spray was all that was needed.
2)second rain and a windy day, the vehicle didn’t fair quite so well as it had some splashed dirt on the bottom quarter panels , and dust had settled on the paint, was going to wash it but I have a product that is a waterless cleaner/detailer, just did that, windows and all, buffed with a micro-fiber towel and the deep shine was back.
so I can honestly say that its a solid ceramic coating, only issues were from the wax sealant washing off causing the static to come back, and the rain brought the dirt.
I am very pleased with this product so far as it has held a brilliant shine even with heavy downpours of rain and wind its shine coating remained intact.
I`ll revisit after a month if I need to add another coat or not., I think that by putting 2 coats on was a large help holding onto the paint.
hope this review has helped, I don’t get paid for any of my reviews by product or gift cards, I`m honest and if something does not work I`ll point out the issues hopefully saving someone else from loosing money on a bad product.
Marcos Paez –
This ceramic coat goes on very easily and self levels quite nicely too. First day out after letting it cure over night instead of the 20 min in the garage, we had some rain. The water was just coming right off and seems to hold very well against harsh environments. Since I do take my suv through some nasty roads, the ceramic coast holds up and If i see a spot that be lacking some hydrophobic properties, all I do is hit with a topper coat. Bam!!… goods as new.