- ✔ Supports up to 200LPH, the original flow only 60-80LPH
- ✔ Kemso Support for our pumps is USA based and provided by USA technicians
- ✔ Designed for gasoline or Ethanol
- ✔ Bypass valve set at 125.8psi, higher than original performance standard
- ✔ Serialized fuel pump body guarantees Lifetime warranty. Kemso has built its reputation on providing a lifetime warranty for all its OEM and performance fuel pumps


Frete Grátis em todo o BrasilProduto Original Importado dos EUA
OEM Replace Intank Fuel Pump for Sea-Doo RXT 2005-2007 | RXT 300 2018-2023 | RXT (CA/CB) 2012-2023 | RXT (RS/CS) 2008-2012 | SP 210 2011-2012 | Spark 2014-2023 | Spark 900 Ace…
*$636.90
Informação adicional
Brand | KEMSO |
---|---|
Vehicle Service Type | Car |
Material | Alloy Steel |
Specification Met | CE |
Auto Part Position | Inside |
Body Material | Alloy Steel |
Gas Type | ethanol,gasoline |
Operation Mode | Electric |
Fit Type | Vehicle Specific Fit |
Manufacturer | KEMSO |
Style | 18 |
UPC | 793101458800 |
Model | KMS Fuel Pumps |
Item Weight | 15.9 ounces |
Package Dimensions | 6.54 x 4.76 x 3.23 inches |
Country of Origin | China |
Item model number | 5 |
Exterior | Machined |
Manufacturer Part Number | 5 |
Date First Available | January 30, 2021 |
Emily Niemeyer –
I bought this because my 2002 BMW K1200LT had been running sluggish for the past few months and getting 26mpg. I had tried many things plug and wires, 02 sensor and had the exhaust system checked. With bad mpg my mind didn’t make me think fuel pump. I asked a friend and he said either I got a bad 02 sensor or fuel pump/filter. With that I ordered this pump and got a wix fuel filter 33032 figured do them both since they were both in the fuel tank. After I put the new pump and filter on I was amazed just at start up and the power was back to 100% and MPG jumped back to the 40s. Side note this pump is quite a bit quieter. This was the fix for me great part!!
Meagan Foskitt –
The pump was installed on my Polaris 700xp side by side gas tank.
Amazon Customer –
Very good fuel pressure on renegade gen 1
Gixxernaut –
The part seemed to be of good quality, however, upon installation, I discovereed that the bolt posts were made of a very weak alloy. The smaller post sheared off when I torqued the securing nut down and as a result there are not enough threads to secure the nut. I attempted to sodder the terminal connection , however it resulted in the housing melting and the pump is now unusable.
frc –
good fit for 08 500 renegade little tricky with the new pickup you need to adjust the angle a bit so it clears the tank angle
Emily Niemeyer –
Este kit es para una 2003 BMW R1150 GS Adventure y tiene todo lo que necesitas. En Europa solo se encuentran bombas de mala calidad a un precio desorbitado y tienes que comprar aparte las juntas tóricas, el trozo de manguera, las abrazaderas, el “strainer”, el amortiguador de vibraciones y las presillas. Todo esto se puede ir a 150€ en una bomba de mala calidad o más del doble si es una bomba original, aunque no tiene marca.
En resumen inmejorable oportunidad a un precio casi ridículo en Europa, 59€ incluyendo IVA y transporte desde USA.
Bruce –
It was perfect.
Elijah Scott –
I bought this for an RC51 and it’s clearly listed in the compatibility list. The only thing that was truly compatible was the pump itself None of the filters or the rubber cap fit, at least not in the assembly housing for the RC51. Installation was very difficult because of this and involved a trip to a nearby Auto Zone for a piece of fuel line that would work.
Once I had it installed the bike did start and run, so I guess it’s functional enough and hopefully will be for a decent amount of time. Uncertain about the quality but it seems (at ma minimum) fair.
Timothy a. Diehl –
Fitted easily and works well. Installed with a new fuel filter so the old classic is now ready to go again!
frc –
I installed this in my 2001 Seadoo RXDI and it worked well. It took me a while to figure out how to make it work. It comes with a bag of parts, and you must figure out how to make it work. There aren’t any instructions and the parts look different than the factor parts. It took me about 1 hour to figure it out and I’m a mechanically inclined person… I was about to send it back but then I figured out what parts to use on the pump. The kit comes with many parts you don’t need. They need to give some instructions or diagrams to show how the parts work for your configuration. If it had instructions it would get 5 stars.