Frete Grátis em todos os produtos
- The NOVUS Complete Plastic Care Kit is the Most Effective Way To Clean and Polish Plastics
- Includes: one 8-ounce bottle of NOVUS #1 Plastic Polish, one 8-ounce bottle of NOVUS #2 Fine Scratch Remover, one 8-ounce bottle of NOVUS #3 Heavy Scratch Remover, and pack of Polish Mates Disposable Towels
- Restore & Repair 3-Step System for Reusable Plastic – Contribute to environmental sustainability with less waste entering the landfill
- Remove heavy and fine scratches and abrasions from most acrylic surfaces. Refresh faded plastic and clean acrylic surfaces until they look like new again
- Perfect for protecting, cleaning, polishing and restoring plastic protective shields. Protect valued posessions and extend the life of plastics & acrylics
- Notice: When using any NOVUS product, ensure you are always testing on a small inconspicuous spot for compatibility. NOVUS #2 Fine Scratch Remover and #3 Heavy Scratch Remover are not recommended for use on coated plastics, UV-protected surfaces, or eyeglass lenses. This will permanently damage items it is not intended for.
Chemical Guys COM_129_16 VSS One-Step Scratch and Swirl Remover Compound Polish, Works on Cars, Trucks, SUVs, Motorcycles, RVs & More (16 oz)
*$384.60
Car Scratch Remover for Vehicles - Scuff Removal and Repair Buffer Compound for Removing Swirls and Eraser to Buff Out Scratches from Paint - 3 Pack
*$301.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
NOVUS-PK1-8 | Plastic Clean & Shine #1, Fine Scratch Remover #2, Heavy Scratch Remover #3 and Polish Mates Pack | 8 Ounce Bottles
*$427.60
Informação adicional
| Material | Plastic, Acrylic |
|---|---|
| Grit Material | Plastic |
| Item dimensions L x W x H | 8 x 8 x 8 inches |
| Brand | NOVUS |
| Grit Type | Fine |
| Compatible Material | Acrylic,plastic,plastics |
| Grit Number | 120 |
| UPC | 077918071002 609722134576 |
| Number of Items | 3 |
| Global Trade Identification Number | 00077918071002 |
| Manufacturer | NOVUS |
| Item Weight | 1 pounds |
| Product Dimensions | 8 x 8 x 8 inches |
| Country of Origin | USA |
| Item model number | 7100 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 7100 |
| OEM Part Number | NOVUS 7100 |
| Date First Available | February 2, 2006 |
Amanda1463 –
This stuff is great, I have an old turntable the dust cover had gotten dull. I wet sanded the top with 2000 grit sand paper, then used #2 Novus to polish the acrylic. It took about three polishings, but it turned out great, its clear again.
William L. Langley –
Pricy but it works great!! Highly recommended!
Amanda1463 –
Project Background:
My darling husband purchased a used red Maytag front loading washer and dryer for me. Yay right? Wrong. As you can see from the customer images that I uploaded (the one with the blue strap across) they were beat to h***. Great. My old ones weren’t even in bad shape. I don’t even know how they would get that beat up. Anyway, there were scuffs all over, paint transfers from smacking walls, and scratches ranging from light scuffs to deep gouges on the doors especially. So needless to say when I purchased this product I had very little hope despite the reviews.
I started off by wiping the set down with Windex, then used a toothbrush and Awesome cleaner (available at Dollar General for $1 and will clean just about anything) which removed the paint and any grime that was stuck on. Then I polished it down with Windex to remove the film left over by the Awesome. The after scrub pic can be seen in the scratched door image of the set.
Then I went to work with the Novus. I started with 1 to clean any remaining lint, dust, etc. then used the 3, 2, 1 respectively per the instructions. The product is recommended to be buffed off and repeated as necessary. This wasn’t really doing much as you can see it was quite a job for the Novus. So I tried it my way next. I took the 1, sprayed then immediately wiped. Next I took the 3, squirted it in my hand and rubbed it all over the surface. I let it dry then wiped it off in a circular, buffing type motion. The product dries and wipes off like a dried powdery, chalky substance. Think thick wet chalk that has dried. I repeated this process with 2, then polished with 1.
Results:
I have uploaded 4 customer images. I am pretty amazed by the results. Now don’t get me wrong, this product does not defy logic. The really deep scratches were better but still visible from some angles. But as you can see from my customer images, overall it did a wonderful job on this washer and dryer.
Ultimately my results exceeded my expectations. Well worth the 16 bucks in my opinion, as I have plenty left (this project only used about a couple ounces of 2 & 3 and a few spritzes of 1 when used quite liberally) to use around the house.
Note: If you put it on coated surfaces (ie. the grey door trim or silver handle) it will not make the scratches disappear and will leave a hazy film behind. I just cleaned that up with a bit of Windex on a rag and it did not damage the surface in any way. Also worth mentioning, on the clear coated red finish of the set it did work, but not to the level of amazing that it worked on the clear front of the doors.
Even if it doesn’t work for some deep, deep scratches or gouges, it is still worth the $$ because of its effectiveness on the medium to light stuff. I am perfectly happy and will be purchasing this stuff in bulk!
strandedonpurpose –
El uso es sumamente sencillo tanto a mano como con pulidora.
LF Homeowner –
Acquistato per lucidare il case della PS3 Fat e della PS4 con cover lucida ha levato tutti i graffi presenti. Ancora meglio con il display del vecchio Game Boy segnato da graffi più o meno profondi che rendevano difficile vedere il gioco, è bastato usare tutti e 3 i prodotti una singola volta per togliere i graffi il tanto che bastava per risolvere il problema dell’impossibilità di vedere il gioco. Ottimo prodotto!
Dave K –
I bought this kit for use with one of my hobbies of restoring old telephones. But it occurred to me that it would work on headlights. It took some work to polish them, but the kit worked better than anticipated. I highly recommend it, just make sure you have lots of rags for the polishing.
MAC –
The clear acrylic dust cover on my Denon turntable from the 80’s had a variety of scratches after decades of use. They ranged from typical light scratches to heavier scuffs and scratches left by various items placed on the cover over the years.
This product worked wonderfully at clearing most blemishes. I’d be lying if I said it was perfect, but it is much improved — to the point that a casual observer wouldn’t consider it to be “scratched” at all.
Don’t think this is a miracle product that will immediately erase all defects. It isn’t. It takes patience and elbow grease — I spent 30+ minutes working on small areas at a time, going through the heavy and fine polishes, wiping clean and repeating. This is a good thing — it allows you to work deliberately without making matters worse rather than better (the heavy polish can leave small swirl marks which are cleared-out by the fine polish).
All-in-all, it worked for my application. Recommend.
Brent –
easy to use
MAC –
After using the Novus polish to remove the scratches and haze from my car’s headlights, I have found that the product does work, but it requires much more work than they lead you to believe. If you’ve seen the short on-line video’s of this stuff in use, they make it look way too easy. It’s not as easy as 1-2-3. First, my headlights weren’t real bad, just some light scratching and slight oxidation. I used a variable speed drill and a 3 inch Roloc foam attachment to apply the polish. I did not use the #3 because my lights weren’t that bad so I only used the #2. I applied the polish using the drill on a somewhat slow speed and found that I needed to apply a good amount of pressure to really get the scratches out. I added a little more speed on the drill and did a second application, again putting a good amount of pressure on it. As long as I kept the applicator moving back and forth, the plastic lens did not get warm at all so no worry about melting the plastic, but I think the foam applicator helped with that. A wool or felt applicator may have been different with the heat. After about a good 15 minutes or more of application of the #2 polish, I let a good coat of the polish dry on the lens as per the instructions. Then buffed with the drill a dry cloth applicator. Instructions say that this is a crutial step to get good results. The lights definately looked much better and were much clearer. This stuff does work, but expect to do some work, especially if you have a lot of scratching. Deep scratches likely will not be removed, but will look much less visible. The #3 polish may be needed for lenses that are severely scratched and oxidized, and expect to do some work. Forget about doing this by hand for headlights. I would suggest removing your headlights before doing this if you plan on using it for that. Overall a good product, but plan on using some elbow grease.
Ilaria A –
Doesn’t work