Frete Grátis em todos os produtos
- Commercial Grade – Designed to accommodate two (2) 6V batteries, including automotive, marine, RV, and other commercial batteries.
- Rugged Design – Four corner fastening system and captive lid for easy installations, large cable entry holes for large gauge cables, full flow ventilation for releasing battery gases, and a battery acid reservoir.
- Designed for Rugged Environments – Impact-resistant down to minus 40 degrees Fahrenheit, withstands acid, gas, oil, and other contaminants, and immune to UV exposure.
- Keeps your Battery Safe – Limits water entry, effectively collects battery acid, allows adequate ventilation, and protects against accidental contact of battery terminals.
- Certified and Tested – Meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications.
Beaspire Jumper Cable Clamps Compatible with Mil-waukee M18 Tools, 5.9ft 8AWG Battery Jumper Starter Cables Adapter, Automotive Booster Line for Mid-Size Cars Light Trucks
*$397.00
Side Post Battery Disconnect Switch, Battery Terminal Link Quick Switch, Power Master Disconnect Cut Off Isolator for Boat Small Yacht RV Camper Truck Car Vehicle
*
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
NOCO HM426 Dual 6V GC2 Commercial-Grade Battery Box
*$1,826.80
Informação adicional
| Manufacturer | NOCO |
|---|---|
| Brand | NOCO |
| Model | HM426 |
| Item Weight | 7 pounds |
| Product Dimensions | 18.25 x 14.25 x 14 inches |
| Country of Origin | USA |
| Item model number | HM426 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | HM426 |
| Special Features | Captive Lid Hold-Down, Battery Box for GC2 Batteries, Four Corner Fastening System, Full Flow Ventilation |
| Voltage | 6 Volts |
| Date First Available | July 9, 2010 |
Amazon Customer –
Nice and durable and looks great.
AlexinCalgary –
Sturdy and well built plastic option to store your dual 6v batteries. I was contemplating this purchase for some time looking at more expensive metal box option with diamond plating but this box looks good and does the job I wanted it to.
Steve M. –
This battery box is perfect for keeping two 6 volt golf cart battery’s secure and sealed.
R. Racus –
Enclosed golf cart battery box that holds (2) 6 volt batteries and allows you to screw box to the location you want to put it. Top bolts to box with 2 bolts and has spots on bottom sides to mount with screws to the location. lid is held in place with 2 bolts. We’ll made box.
Virgil Reasor –
Very nice dual 6v battery box. I installed 2 boxes on 35ft cruiser with 4 6v Trojan T-105’s for 2kw inverter. Nice pass thru’s on multiple sides 4/0 was a bit of a squeeze. I mounted using exterior corners to keep interior sealed in case of any spills. Both T-105’s fit with a lil room to spare, battery carry strap suggested for lowering into box. Nice spin knob lock lids securing battery posts out of harms way. The bottom holds the battery up some to keep battery case from setting in acid in case of spill although bottom is not overly strong so a stout surface to mount box on is suggested. Exactly what I was looking for to install in engine compartment on boat.
Mark –
My Deka GC15 6 volts batteries fit with room to spare. I did not use the external mounting ears to secure the box. I drilled holes in the bottom of the box and used fender washers to secure it to my trailer. I felt that the ears were just not going to keep it secure long term. Kinda too small to be gripped by the bolts. The box is great looking and looks very clean. It is t as substantial as i was expecting, but adequate. I would buy again.
Paul D. –
I’m using this box for 2 Trojan T105 6Volt batteries in my RV bank. The batteries fit really nice and the box is high quality. It’s the nicest battery box I’ve ever used. I drilled 2 small holes on the bottom so water could drain out in the event any got in there.
ALBEE –
I purchased the one that hold two six volt battries side by side. Worked nice . Recommend a flat surface to set in on. The box looks great and allows enough room for cables under the cover. Lid screws down with two knobs. I mounted a disconnect on the outside of the box. It is light weight but solid if on a flat surface.
Mark S. –
I have 3 of these on separate remote solar systems. They sit on concrete blocks. Since they are holding lead acid batteries, I do not have them air tight. The only negative is that insects and spiders like to nest inside. So far no snakes. When I check on the batteries I usually take a leaf blower and clear out the dust and bugs. Usually no water inside. I have tried other containers and methods but so far this is the best. I have other NOCO boxes in other sizes and three in this size. They have held up quite well. The weather and the sun have not harmed them. NOCO has been my go to source for battery boxes for years now.
AlexinCalgary –
I really liked this battery box. It’s built really strong but I had to return it as I couldn’t fit it in my application. I ended up with something for the same price but wasn’t built as sturdy. I would buy again