Frete Grátis em todos os produtos
### NEXPEAK NC201: Carregador de Bateria Inteligente de 10 Amp
O NEXPEAK NC201 é um carregador de bateria inovador que combina tecnologia avançada e eficiência para atender às necessidades de diversos veículos, desde carros e caminhões até cortadores de grama e barcos. Com um design totalmente automático e recursos de manutenção, este carregador é a solução ideal para quem busca um desempenho superior e segurança no carregamento de baterias.
#### Descrição do Produto
- 【CARREGADOR RÁPIDO DE 10 AMP】 O NEXPEAK NC201 oferece um carregamento de 12V a 10 Amp e 24V a 5 Amp, utilizando um sistema de 7 estágios que proporciona uma velocidade de carregamento significativamente mais rápida do que carregadores automáticos de 8 Amp ou 5 Amp. É compatível com todas as baterias de chumbo-ácido automotivas, marinhas e de ciclo profundo, incluindo AGM, GEL, SLA e Flooded, adequando-se a carros, caminhões, SUVs, motocicletas, cortadores de grama e barcos.
- 【PROTEÇÃO DE CARREGAMENTO】 O NEXPEAK NC201 conta com um controle inteligente que inclui compensação de temperatura para climas quentes e proteção contra subcarga em climas frios. Além disso, possui proteção contra inversão de polaridade, sistema de resfriamento, sobrecorrente, material à prova de fogo, sobretensão e curto-circuito. Com múltiplas proteções, você pode carregar suas baterias com segurança em qualquer lugar.
- 【REPARO PULSADO DE ALTA EFICIÊNCIA】 Este carregador detecta automaticamente a sulfatação da bateria e a estratificação do ácido, utilizando a mais recente função de reparo pulsado para restaurar o desempenho perdido da bateria, garantindo partidas mais fortes do motor e prolongando a vida útil da bateria. Nota: não pode ativar ou carregar baterias totalmente descarregadas.
- 【CARREGAMENTO VISUALIZADO】 O grande display LCD exibe o status de carregamento e da bateria, incluindo tensão e corrente de carga, temperatura interna, porcentagem de carga, modo de verão e modo de inverno, tornando o uso mais conveniente.
- 【PLUG AND PLAY】 Sem etapas complicadas, basta conectar e carregar. Fique em casa e carregue suas baterias de forma prática. O NEXPEAK NC201 é uma solução completa para baterias, funcionando como carregador, mantenedor, carregador de gotejamento e desulfatador de baterias. Uma ferramenta indispensável para sua garagem.
### Instruções de Uso:
1. Conexão: Conecte o carregador NEXPEAK NC201 à fonte de energia e, em seguida, conecte os terminais do carregador aos terminais da bateria (positivo ao positivo e negativo ao negativo).
2. Seleção de Modo: Selecione o modo apropriado para a sua bateria (12V ou 24V) utilizando o painel de controle.
3. Início do Carregamento: Após a conexão, o carregador iniciará automaticamente o processo de carregamento. O display LCD mostrará o status do carregamento em tempo real.
4. Monitoramento: Acompanhe a porcentagem de carga e a temperatura da bateria através do display. O carregador ajustará automaticamente a corrente e a tensão conforme necessário.
5. Desconexão: Após o carregamento completo, desconecte o carregador da bateria e da fonte de energia.
### Características do Produto
– Tensão de Saída: 12V (10A) e 24V (5A)
– Estágios de Carregamento: 7 estágios
– Proteções: Inversão de polaridade, sobrecorrente, sobretensão, curto-circuito, resfriamento ativo
– Display: LCD grande com informações detalhadas
– Função de Reparo: Pulsado para restauração de desempenho
– Compatibilidade: Baterias AGM, GEL, SLA e Flooded
– Dimensões: Compacto e leve, ideal para armazenamento em garagem
### Perguntas Frequentes (FAQ)
Pergunta: O NEXPEAK NC201 pode carregar baterias totalmente descarregadas?
Resposta: Não, o NEXPEAK NC201 não pode ativar ou carregar baterias que estejam completamente descarregadas.
Pergunta: Como sei se o carregador está funcionando corretamente?
Resposta: O display LCD fornecerá informações em tempo real sobre o status de carregamento, incluindo a porcentagem de carga e a temperatura da bateria.
Pergunta: Posso usar o NEXPEAK NC201 em diferentes tipos de veículos?
Resposta: Sim, o NEXPEAK NC201 é compatível com uma ampla gama de veículos, incluindo carros, caminhões, motocicletas, cortadores de grama e barcos.
Pergunta: O carregador possui garantia?
Resposta: Sim, o NEXPEAK NC201 vem com uma nova substituição disponível para qualquer problema de qualidade.
Pergunta: É seguro deixar o carregador conectado por longos períodos?
Resposta: Sim, o NEXPEAK NC201 é projetado com múltiplas proteções para garantir um carregamento seguro, mesmo quando conectado por longos períodos.
jlvaldes –
I needed it to charge the Battery of the Buick Minivan (800Ah) and my truck Ford Ranger (850aH). After I bought it I read a review from one user that this charger does not charge a 800Ah battery so I was worried this won’t charge my batteries. I tried to charge the Buick first without disconnecting the battery in STD mode, noticed after started with the initial the DFS, the Buick fight back, I guess the protection so when finish with the DFS, it shows that is charging and the next 1-2 mins show full. Not true, a multi-meter still show 2 DC volts. Put it in my Ford Ranger 96 without disconnecting the battery and after DFS voila started to charge, you will see that is charging because on the right side of the screen shows percentage and it is going down until reach the level of charge it is, my case less than 20 % so it stays there and now blinks going up, after leave it charging over night, boom, battery fully charge. Went back to the Buick, disconnected the POS of the battery and connected the charger, boom, over night battery full charged. Did what I bought for what I needed this charger to do. That was my experience with this charger. I can tell it works also for batteries above 800 ah.
Denis G. –
I recently tested the Nexpeak NC201 Battery Charger, and its simplicity instantly impressed me. The operation is as easy as connecting it to the battery, selecting the required setting, and letting it work its magic. I used the repair mode on a battery that hadn’t been active for over a year. Although the repair process took about 6 hours, the outcome was remarkable—the battery was revived and is now performing well.
While some users have noted that the cable might seem a bit short, this wasn’t a major issue for me. I simply placed the charger near the battery and used an extension lead to comfortably manage the setup. Another point worth mentioning is that the LED light indicator’s brightness isn’t intensely bright; however, this hasn’t affected its functionality—its subtle glow is sufficient for monitoring the charging process.
Moreover, I secured the charger at a discounted price, which makes it an even more affordable option. Overall, the Nexpeak NC201 offers an excellent combination of ease-of-use, dependable performance, and cost-effective value, making it a solid choice for anyone looking to repair or maintain their batteries.
Amazon Customer –
I’ve searched several online and local stores for a 10 amp charger and couldn’t even find a lower amperage one that is less expensive. Note, I said “less expensive”, not cheaper. works very well. It charged my Jeep AGM battery sometime overnight to 100%. The battery had a very low charge , only enough to power the courtesy lights when door was opened….but “dead” if I tried to start. As recommended by the instructions, I let the charge continue until the FUL message was displayed. My older charger would not charge at 10 amps. The display is bright and easy to read. Just remember to select the battery type and pay attention to the connect and disconnect instructions. Construction, fit and materials look as good a more expensive units I examined. The clips are a bit small, but use an integrated piece of metal to connect to the charger cables. They are not copper, but appear to be steel. If you connect the clips backwards, the display will warn you. Very quiet and cool. This unit was manufactured in China…not my first choice, but check the box, it appears they are manufactured in more than one country.
laurel –
Pros:
– I really like the size of this charger.
– It seems to work well and lets you know when charging is complete.
– after connecting the battery, before plugging in the charger, it shows battery state. I like that it shows the current voltage.
– once charging starts, it cycles through information such as voltage, current amperage, temperature. It has a nice battery level “stack” showing progress.
– nice strong clips for connecting to the battery.
Cons:
– the display is difficult to read unless up close. This is a problem in any lighting conditions. It’s just hard to see.
– when connecting it to the battery there is always a big spark and loud beep. Talk about startling a guy! This is before being plugged into an electrical outlet (I always connect the battery before plugging in the charger). This unit draws from the battery to show battery state – it must draw a lot considering the size of the spark.
– the cables are WAY too short. Although shorter cables are nice when putting the charger away to store it, that’s definitely not the case when in use. Both the cables to the battery and the power cord are quite short. This means you have to have the charger right next to the battery (you can’t put it somewhere easier to see when you’re not right there). You will need an extension cord unless you take the battery out of the vehicle and set it right next to an outlet.
– the mode settings selection has, among others, std and wet cell… in my mind a standard lead acid battery is a wet cell. The manual says wet cell is for heavy duty batteries requiring higher current so I’m using std for both my cranking and deep cycle batteries. It seems to work fine.
– you can’t change the mode after a while which is good, but touching the display anywhere close to the mode button surprises you with a loud beep. It seems like every time I try to adjust the position of the charger, I accidentally touch that and get startled with the loud beep.
Notes (not good or bad):
– when charging is “complete” the display shows FUL, but the charging isn’t really completed until it shows OFF.
– make sure to select the correct battery type right away as part of your connection sequence.
Lemme Review –
Al conectarlo se ha puesto en modo error y no deja camabiar a ningún otro modo de carga, es más, el botón mode como si no existiera. Y no es la primera vez que uso este tipo de cargadores. Totalmentre decepcionado y una pérdida de tiempo total. Lo he devuelto.
Denis G. –
je suis satisfait du produit , il est facile d’utilisation , compatible pour les batteries “start and stop”, j’ai prix le modèle , pouvant recevoir des batterie 24 volts l’écart de prix n’étant pas énormes (qui peut le plus peut le moins ) pendant la charge il y a l’information du voltage , de l’ampérage , et de la température
ANTONIO –
This smart trickle charger is fully automatic, making it very easy to use. Simply connected it to the battery, and it took care of the rest – no complicated settings or guesswork involved!
The charger works quickly and efficiently, providing a solid charge without overcharging, which gives the peace of mind. The LED indicators are clear and informative, letting know the charging status at a glance.
It’s also lightweight and compact, making it easy to store when not in use. If you’re looking for a reliable and user-friendly battery charger, I highly recommend the NEXPEAK NC201
Andrei –
Used it for charging RE Bullet 350 and MT-15 battery. It worked perfectly fine. Worth the money!
Amazon Customer –
Works exactly as intended. My car was parked over the winter and I needed to get the battery back to life + hold charge. It was able to get the battery to the 12.6 range in about an hour using the STD mode. That was good enough for the car to start but in order for it to hold charge over night without relying on the alternator, I switched the mode over to Motorcyle/Trickle to slowly boost it up to ~13.8 over a few hours and it held charge over a 30 degree night. It was much faster than I was expecting. It’s a great tool to pick up.
Side note: I see a lot of people struggle to change the mode, there is a touch button with a fingerprint icon on the unit labeled “Mode Selection” (Crazy I know LOL). According to the manual it locks itself after 25 seconds if no changes are detected, so you have you reconnect the clamps to be able to change modes again.