Frete Grátis em todos os produtos
### Descrição do Produto
O KP KOOL PRODUCTS Gas Can Spout é a escolha ideal para quem busca um abastecimento de combustíveis eficiente e sem complicações. Com um design inovador e flexível, este bico é compatível com os galões Pre-Ban Chilton e Craftsman, incluindo os modelos P10, P15, P20, P25, P50, P60 e P500. Para garantir um encaixe perfeito, é essencial que a abertura do seu recipiente tenha um diâmetro externo próximo a 2 polegadas.
Produzido em plástico de alta qualidade, o bico do KP KOOL PRODUCTS se destaca pela sua durabilidade e resistência. O material premium utilizado na fabricação assegura que você possa maximizar o uso do seu galão de gasolina vintage, prolongando sua vida útil e funcionalidade. O kit inclui uma tampa de rosca, um plugue de ventilação, uma tampa de faixa, uma tampa de parada e uma junta, oferecendo tudo o que você precisa em um único pacote, eliminando a necessidade de buscar peças separadas.
Além de ser uma solução prática, optar pelo KP KOOL PRODUCTS Gas Can Spout é uma escolha sustentável. Ele revitaliza galões de gasolina antigos, contribuindo para a redução do desperdício e promovendo a reutilização. Essa abordagem não só economiza dinheiro, mas também representa uma alternativa consciente ao descarte de produtos.
Com 8,5 polegadas de comprimento, o bico proporciona um abastecimento controlado e sem desperdícios. Sua cor amarela vibrante não apenas confere um toque de estilo, mas também garante visibilidade durante o uso.
### Instruções de Uso:
Para utilizar o bico do KP KOOL PRODUCTS, siga os passos abaixo:
1. Preparação: Assegure-se de que o galão de gasolina esteja limpo e seco antes de instalar o bico.
2. Instalação: Rosqueie o bico na abertura do galão, garantindo que esteja bem fixo e vedado.
3. Ventilação: Insira o plugue de ventilação para permitir um fluxo adequado de ar durante o abastecimento.
4. Abastecimento: Posicione o bico sobre o recipiente desejado e incline o galão para iniciar o fluxo de combustível. Mantenha o bico em um ângulo que minimize o risco de derramamento.
5. Finalização: Após o abastecimento, remova o bico e recoloque a tampa de rosca para evitar vazamentos.
### Características do Produto
– Compatibilidade: Projetado para modelos Pre-Ban Chilton e Craftsman (P10, P15, P20, P25, P50, P60, P500).
– Material: Plástico de alta qualidade, resistente e durável, ideal para uso prolongado.
– Acessórios Inclusos: Inclui tampa de rosca, plugue de ventilação, tampa de faixa, tampa de parada e junta, proporcionando uma solução completa.
– Comprimento: 8,5 polegadas, ideal para um abastecimento controlado e preciso.
– Cor: Amarelo vibrante, que proporciona visibilidade e estilo durante o uso.
### Perguntas Frequentes (FAQ)
Pergunta: O bico é compatível com outros modelos de galões de gasolina?
Resposta: O bico foi projetado especificamente para os modelos Pre-Ban Chilton e Craftsman. Para garantir um encaixe adequado, verifique se a abertura do seu galão tem um diâmetro externo próximo a 2 polegadas.
Pergunta: O que vem incluído no kit de bico de gasolina?
Resposta: O kit inclui o bico de gasolina, uma tampa de rosca, um plugue de ventilação, uma tampa de faixa, uma tampa de parada e uma junta, tudo que você precisa para um uso eficiente.
Pergunta: O material do bico é resistente a produtos químicos?
Resposta: Sim, o bico é feito de plástico de alta qualidade, projetado para resistir a produtos químicos e garantir durabilidade ao longo do tempo.
Pergunta: Como posso garantir que não haverá vazamentos durante o uso?
Resposta: Certifique-se de que o bico esteja bem rosqueado na abertura do galão e que todas as tampas estejam corretamente instaladas. O design do bico também ajuda a minimizar o risco de vazamentos.
Pergunta: Posso usar o bico para outros líquidos além de gasolina?
Resposta: O bico é projetado principalmente para gasolina e combustíveis similares. Para outros líquidos, recomenda-se verificar a compatibilidade do material com o líquido em questão.
101101 –
No more slow fuel transfer with the glug, glug, glug. Using a step drill it is very easy to drill the holes then the vent plug is pushed in. Works great and refueling is much faster. The longer spouts work great as well and each has a screw on cap. I highly recommend this product. The only drawback that I found was that the package was sent from the US thus the delivery window was slightly longer than anticipated.
nailer –
Perfect ! Thank You !
z2010m –
These fit my gas cans quite well. The yellow ring was the right size for one container, while the black ring fit on the smaller container. I was pleased to find out that there was 3 of each in the package. The spout is flexible and the screw on tip with retainer worked well. The only issue I found was the rubber O-ring to seal the spout to the gas can was a hair on the small side for the larger can. But it did not leak so I will wait and see after a few fillups and find out if it still seals. Overall for the money a lot less expensive than buying new gas cans
John –
I bought these because the two new polyethylene gas cans that I bought have spring-loaded pour spouts with safety interlocks. The spouts were constantly falling apart (plastic retaining tabs in the spring-loaded mechanism were deformed and wouldn’t hold) so I found these.
Everything about these things is marginally usable. The seal is prone to leaking if it’s the tiniest bit out of position when you screw the spout on. You won’t know it until you go to use one, at which time it will dribble some fuel. Unscrew the spout, adjust the seal, tighten the spout. That usually fixes it until the next time you fill the can, then you get to spill another dribble of fuel.
The vent caps have a tendency to pop open and occasionally fall out entirely. At least they’re yellow and easy to spot.
The spouts get the job done but are pretty floppy. Problem is, you usually need both hands to handle a 5 full gallon gas can, so pouring without spilling becomes an exercise in creativity.
The caps have plastic rings to hold them on the spout. While this keeps them from getting lost, the rings bind on the spout when you screw the caps on, which means that capping the gas can is a two-hand job (one hand to spin the cap, another to wind the retaining ring around and around).
I’m giving these things 3 stars because they fit and don’t leak (once you get the seal in the right place, that is). In other words, they meet the minimum standards for usability. They work just well enough that I won’t spend the money to replace them, but that’s not saying much.
Zero Signal –
One of my harbor freight jerry can caps popped/broke. This is a perfect replacment.
The moveable spout is better than the one that came with the can.
John –
Newer gas cans that I bought a couple of years ago had safety spouts on them that are difficult to use, short, rigid and narrows the spout to about the width of pencil. I ended up spilling more gas than I ever did with the old straight through spouts. I didn’t want the new safety spout but felt there was no choice since that was all that was being sold around here. Now thanks to Kool Products, I no longer have to hate my gas cans. The long, flexible spouts now allow me to fill my vehicle (the short safety spout couldn’t even get close to my fuel filler neck), and flows rather well. Spillage is also minimized at refill. The kits come complete with two different caps threaded course or fine (3 each), 3 long spouts (with flame arresters/filters), 3 vents for cans without vents (like my safety cans), and three replacement type (attachment), vent caps for my older cans that I can now use again because of this kit), 3 vent caps (no attaching point), and three plastic lanyards. Not only was I able to convert two of my new cans, I was able to repair three of my older cans. If you have safety spouts and hate them, get this, you won’t regret it!
Jim –
I bought this to replace the nozzle on my 2 gal. Blitz can. See picture of 1 gal. can. The black cap fit and the washer seems as though will work. I’ll know more when I use it to pour gas. I heated a 1/2″ drill bit and was able to melt a 1/2″ hole that fit the vent plug reasonably well. I don’t think that any debris went into the can the way it would if you drilled the hole. It’s a little loose but will not pose any danger. I had to trim the hole to remove debris. When I was finished, I soaked the bit in cold water so as not to affect the temper. I’ll add to this when I know more.
Next Review: I used the can and was disappointed because it leaked. What was also surprising was that both the black and yellow nozzle screw ons’ fit although the yellow one seems to be the best fit. Upon inspecting the Blitz can I noticed a 1/8″ hole on the front side of the screw on stem. I looked at another Blitz can and found the same thing. My wife told that can leaked as well. So the holes are intended, I suppose as vents for when pouring. I put a piece of thin masking tape over the hole a screwed the nozzle back on. No leak. Someday I’ll get around to making a better fix for the hole. So bottom line the kit seems to work fine. I don’t understand the black and yellow screw ons’.
Jim –
Bought two sets (6) of these in March 2023, I live near the border of a state that sells gas much cheaper than my state so I have six 5-gallon cans I often take with me to fill my other vehicles up with. I liked the extra length on these for refilling my car, however the spouts come with a screen at the base end of the spout and the plastic that holds the screen in place is not made of gas resistant material. It is now July 2023 and these screen holders have begun to break down and crumble and I ended up having to clean my cans out and filter the remaining gas so as not to contaminate my vehicle’s gas tanks with the pieces of plastic that came apart from the screen. The spout itself held together but now I don’t trust it and will use the original ones I have (with a screen) in case there are still some small pieces still left in my cans that I didn’t see.
JE –
I can now use a gas can like you should be able to.
No more EPA low IQ safety BS.
Janet K. –
I like no having to figure how to get the gas out of the container, it’s like the old time ways again!!!!!!! Just keeping it simple and easy.