Frete Grátis em todos os produtos
- All-Inclusive Kit. Contains everything you need to get started & try out our complete KBS system! A full 1/2 pint of RustSeal will cover an approx. 12 sq. ft. area with 2 coats. Experience the quality & durability for yourself. Our complete system in one package!
- Withstands temps up to 600°F. Will not crack, flake or peel.
- RustSeal is a waterproof coating strengthened by repeated exposure to moisture. RustSeal forms permanent non-porous barrier against moisture and oxygen. Apply directly over treated rust.
- High abrasion and chemical resistance. Repels fuels, oils, most acids and alkalis, and graffiti.
- Excellent surface penetration and adhesion
- Flash point: 40.0 degrees_celsius
Rust-Oleum 215215 Stops Rust Rust Reformer Rust Reformer 10.25-Ounce Spray-Color Black (Pack of 2)
*$344.40
ZRC 10003 Cold Galvanizing Compound | Single Gallon | Iron and Steel Corrosion Protection | Matches Hot-Dip Galvanized Performance | Contains 95-Percent Metallic Zinc
*$3,119.30
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
KBS Coatings 50001 Gloss Black System Sampler, KBS Klean (8oz.), Rust Blast (8oz.)and Rust Seal (8oz.)
*$444.30
Informação adicional
| Manufacturer | KBS Coatings |
|---|---|
| Brand | KBS Coatings |
| Model | 50001 |
| Item Weight | 2.15 pounds |
| Product Dimensions | 9 x 7 x 4 inches |
| Country of Origin | USA |
| Item model number | 50001 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 50001 |
| OEM Part Number | 50001 |
| Date First Available | November 15, 2013 |
Dennis Wright –
super bon produit. il y a 1 ans j’ai fai reparation sur mon rouilleux ford escape et ca tuffer malgrer le sel des route au quebec,
Indigo –
KBS makes POR-15. I wanted a small kit just big enough to do a lawn mower deck. I read up enough to know that this kind of paint does not keep in the can once it’s opened so I did not want to buy a big can. This kit did the job but just barely for 2 coats on The underside of a 30″ deck.
Pros: excellent directions on how to use each step
all 3 parts in the package saves $$
no wastage of expensive paint
Cons: rust converter / etcher not strong enough so time consuming/ challenging to keep wet for a long enough period of time for it to work properly.
Just barely enough paint for two coats on the underside of a 30-in lawn tractor deck.
If your main purpose is to do a small item such as a metal chair or hose reel or small lawn mower deck, this kit will work. None of this process is a walk in the park, but if you spend the right amount of time prepping and removing as much rust as you can, you shouldn’t have to make the process longer because the rust converter is weak. If I have to do it again, I will buy a stronger rust converter liquid and a slightly bigger can of this special paint. Unsure what the longevity and quality will be as I just completed the deck rehab. Will add to this post in the future.
Indigo –
good price
Ronnie Meredith –
Followed directions. Seems to be holding up well. Paint is like a tough plastic coating when dry.
Impossible to keep paint from solidifying in the can though. Even covering with plastic wrap before replacing lid did not work. Plan ahead to use as much of the paint at one time as possible.
I had to throw away over half of the paint because I could not use it all right away.
BTW — humidity causes it to cure. We have a weather-tight garage with a dehumidifier and the paint still skinned over quickly.
Consumer 1 –
This is the one to get if you have the setup to do it right… time, disassembly and brushing capabilities, temp controlled application. and so on. And they even offer it in colors to help your targeted results.
Michael –
Only needed the Blast for a motorbike gas tank. First used washing soda and electrolysis. Rinsed then put small sheet metal screws in the tank and shook about 10 minutes. Removed the screws, rinsed again, and treated the tank with Blast. Shook another 10 minutes and emptied the tank and rinsed. Dried the tank, installed it, filled with ethanol-free gas, started her up and drove around the neighborhood.
S. Johnson –
Easy enough to use as it sealed a rusty surface.
Steve –
My 2 older vehicles, an’03 Windstar and an ‘07 Trailblazer, were beginning to show their age with rust developing on the seam between the inner and outer panels at the bottom of all doors . I checked the internet as to recommended products for this task and found the KBS Coatings system as a recommended product. I was extremely happy when I found this product available on Amazon. Between the packaged instructions, the company’s internet videos and my trusty rotary tool, I was able to complete the job in relatively short order. The job looks great and I don’t think I will bothered by rust again at these spots for quite some time.
JayAndHill –
This was highly recommended to me by a fellow Delorean owner. Our cars came from the factory with an epoxy coating over the frame. My coating got damaged when my brake master cylinder gave out and leaked all over, causing the original coating to bubble up and come off. This product will take the place of that. I heard it is relatively easy to apply, you just have to make sure you use the can up totally or re seal it well with sran wrap so it doesn’t seal to itself. I’m looking forward to using it soon.
Scott –
Got this for my scooter that the tank rusted out internally. Cleaned it out as suggested with this product, and nearly your later I’m still driving around on my scooter just fine. No problems at all shocked actually. I was kind of skeptical but it is what it says it is and then some. As I don’t believe it was supposed to be used internally as I did in the gas tank. So that being said, I definitely would use it again. Was a little bit time-consuming processes. Took about a day and a half for full cure which I would say was well worth the wait. People saying that it didn’t set, just didn’t give it a chance and or follow the instructions correctly.