Frete Grátis em todos os produtos
- Compatible with Mitsubishi 2005-2018 Lancer, 2002-2015 Pajero (aka Montero Sport), 2011-up ASX, 2009-up Outlander, 2004-2008/2010-2011 Endeavor, 2005-2012 Eclipse, 2004-2011 Galant, etc (it’s the customer’s responsibility to verify the size and shape prior to purchase!)
- Push button switch (front panel size 36mm x 18mm) with 4 wire lead extended pigtails, which you don’t have to use if your vehicle has the female end stock harness/adapter
- Please confirm the measurements before buying by checking the photos and reading previous customers’ comments; this switch is compatible only with an identical shape and size of switch panel/opening/slot, and any discrepancy will require modifications to install it
- Ideal for installing auxiliary LED light bars, off-road LED pod lights, fog lights, DRLs, and strobe lighting, enhancing your vehicle’s functionality and appearance while providing improved visibility and a modern look
- Installation/wiring guide: connect BLACK to ground or relay pin #85, RED (for the fog switch background indicator) to battery, ACC 12V+, or relay pin #30, YELLOW (for the fog on/off indicator) to the same #30, and BLUE (for trigger) to relay #86 (you can also check the diagram for more details)
HD Switch 12V 40A Waterproof Relay Replaces 14VDC - 40/50 AMP Song Chuan 896H-1CH-C1S-R1-U03-12VDC w/LED Indicator Light & Dielectric Grease
*$397.00
TRQ Neutral Safety Switch Compatible with 2000-2011 Buick Chevrolet Pontiac Saturn
*$600.40
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
iJDMTOY Factory Style 4-Pole 12V Push Button Switch w/LED Indicator Lights Compatible with Fog Lights, DRL, LED Light Bar, Fit Mitsubishi Lancer Outlander Pajero Montero Sport…
*$250.30
Informação adicional
| Operation Mode | Push Button |
|---|---|
| Operating Voltage | 12 Volts |
| Contact Type | Normally Open |
| Connector Type | Plug In |
| Brand | iJDMTOY |
| Terminal | Button |
| Circuit Type | 4-way |
| Actuator Type | push button switch |
| International Protection Rating | 12 volt |
| Number of Positions | 4 |
| Specification Met | Oem |
| Control Method | Touch |
| Connectivity Protocol | Wi-Fi |
| Color | Compatible with Mitsubishi |
| Unit Count | 1 Count |
| Number of Items | 1 |
| Manufacturer | iJDMTOY Auto Accessories |
| Controller Type | Push Button |
| Item Weight | 1 ounces |
| Package Dimensions | 5.79 x 3.31 x 0.87 inches |
| Item model number | For Repair, Conversion, Custom Retrofit |
| Manufacturer Part Number | AA1325 |
| OEM Part Number | Compatible with Mitsubishi 2005-2018 Lancer, 2002-2015 Pajero (aka Montero Sport), 2011-up ASX, 2009-up Outlander, 2004-2008/2010-2011 Endeavor, 2005-2012 Eclipse, 2004-2011 Galant |
| Date First Available | April 9, 2021 |
![True MODS 6 Pack 4-Pin 12V Bosch Style Fused Relay Switch Kit [Interlocking Harness Socket Holder] [14 AWG Hot Wires] [SPST] [30 Amp] 12 Volt Automotive relays with Fuse for...](https://m.media-amazon.com/images/I/81FVp-H-BUL._SL1500_.jpg)
Tristan –
I would give this 1 star but it does look like the switch belongs in the spot I originally installed it. installing it on the dash was a pain cause I had to pull so much stuff off just to get to the mounting point next to traction/stability control.
I installed this switch on my Evo to control some accessory lights. Could not get the switch to work properly so I contacted customer support. They instructed my to install a relay cause it cannot handle large amperage (the lights were 1 amp max draw). Once I installed a relay, the switch still did not work.
I began to check the connections on the pig tail of the switch and came across that the ground and battery positive was working and allowed the switch to appear that it was functioning. The output on the switch was not working, neither was the blue wire to activate the light on the switch.
In the demo video, it shows the switch lit up when the blue wire receives power, but only the fog light symbol part. My blue wire makes the bottom bar shaped light turn on when it receives power. I could never get the fog light symbol to light up.
Pressing the switch without the blue wire connected to anything lights up the bar shaped light. Pressing it again turns it off. When the blue wire has power, that bar shaped light is always on as long as it has a power supply to the blue wire.
Once again called support and they insist my connection were bad, so I bought a multimeter to check them all… All my connections were made properly and had continuity. Even pulling the green plug on the pigtail to jump the battery positive to accessory positive terminal allowed the lights to work. The only non working item I can lead everything back to, was the switch itself. Customer service keeps telling me that the switch is not the issue…
The switch has been taken out and thrown aside. The pigtail and wires were used on another switch I bought that so happed to work perfectly other than not being able to mount in the open hole I have now (until I reinstall the OEM blank switch). The new switch is just hanging under the fuse compartment currently. Still puzzles me how they told me on multiple occasions that their switch was not the problem (but this other switch works perfect)….
Busymommy –
Great little switch easy switch off.
JLancaster –
Excelente producto
Esteban –
It works, but feels kind of flimsy. Would love for it to have a better feel to it like OEM. Other than that, it’s decent.
Tristan –
As you can see, this ‘Mitsubishi’ switch is not compatible with an 07 eclipse. Seller falsely claims that it fits, Amazon also states that it fits my vehicle. Waste of money/time
Rodrigo Cea –
Only down side is that the orange light in the button is a little darker tone than the OEM buttons
Eric Thompson –
Switch worked out well.
STEVEN KROSE –
Pour la voiture de ma conjointe mais il a briser tout de suite apres 4 utilisation le bouton ne tenais pas en fonction allumer elle devait le tenir pour garder cest lumiere allumer.
eNubiX –
Doesn’t fit inline with hole. Sticks our way too much for mitsubishi outlander 2016 quality isn’t great.
Manuel Z. –
La luz piloto no es de buena calidad