Frete Grátis em todos os produtos
- PACKAGE INCLUDES LED lights ONLY, replace the incandescence bulbs behind the instrument speedometer gauge cluster, dashboard assembly unit is not included; dimmable and work with the stock dimmer
- COMPATIBILITY: Compatible with 2002 2003 2004 2005 2006 Dodge Ram 1500 2500 3500; plug and play type gauge back lights included only, indicators or warning lights NOT included as they are soldering type, which is not easy to accomplish
- 12 VOLT PLUG AND PLAY TYPE ice blue LED bulbs refresh the gauge cluster back lighting and make it much brighter than Incandescent; no resistors required; polarity sensitive, reverse 180 degrees if necessary; manual included for LED bulbs instllation, but not for taking out the instrument cluster unit
- APPLICATION: tachometer, speedometer, odometer, fuel level gauge, engine coolant temperature gauge, engine oil pressure gauge, engine battery voltage gauge
- After-Sales Support: 1 year After-Sales Support since order purchase date, email us if there’s any issue before or after purchase, your case will be taken seriously .
2 PCS H13/9008 Car LED Light Canbus Error-free Decoder, Plug-and-play Retrofit Radio Audio LED Canbus Anti-flicker Radio Audio Filter, Repair Fault Decoder, Suitable for Most...
*$313.00
Motorcraft Wiring Kit
*$464.50
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
HERCOO Ice Blue LED Light Bulbs for Instrument Gauge Cluster Speedometer Compatible with 2002-2006 Dodge Ram 1500 2500 3500
*$337.00
Informação adicional
| Brand | HERCOO |
|---|---|
| Item Package Quantity | 1 |
| Color | Ice Blue |
| Fit Type | Vehicle Specific Fit |
| Auto Part Position | Center |
| Operating Life | 20000 Hours |
| Manufacturer | HERCOO |
| Model | Dimmable, work with the dimmer |
| Item Weight | 0.24 ounces |
| Product Dimensions | 0.47 x 0.47 x 0.43 inches |
| Country of Origin | China |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | FBAMP24532 |
| Special Features | Plug and Play, polarity sensitive, reverse 180 degrees if necessary, no resistors required |
| Voltage | 12 Volts |
| Date First Available | October 28, 2018 |
Rah –
The media could not be loaded.
Right out of the package I absolutely loved these bulbs. Increased gauge visibility, and a look that personalized my truck to my liking.
Good quality LEDs are known for their longevity, brightness, and extremely low power draw. Needless to say, I didn’t want to have to tear my dash apart every year or two to replace a burned out bulb, but here we are. I have had these in my truck for just over a year, and I already have at least three flickering bulbs. I’ll be looking for another brand so I’m not replacing them every year.
Moody –
So these were nice when i installed them, Really sharp looking..! Now 9 months later and mostly driving in the day time…they are starting to flicker …started to flicker first on the left side, now most of the dash…This truck is driven maybe once a week …Not very impressed with the quality
DarkFury –
Installed the cool white lights and the new aqua blue color on the display is eye popping. Was pleasantly surprised at the custom look these led lights added to my 16 year old Dodge Ram 1500. Like the photos that are posted, which inspired my choice, again all I can say is WORTH The Money And Effort.
On the installation, there are videos on the internet that make this task fairly easy, but keep in mind that the led replacement bulbs are polarity sensitive. With that said, once you reconnect the instrument display, check and make sure that all the lights are working. Rotate the lights 180* on the ones that are not. That should correct any lights that weren’t on. The installation uses 12 lights and the kit came with 13, so now I have any extra light just in case.
Price wise they are a bit pricey, but you get what you pay for in my opinion. If you are wanting to do this and are a bit intimidated, all I can say is Just Do It! Watch the installation videos or have a friend do it for you.
If I have ANY issues in the near future, I will revisit my review and let y’all know.
RME –
These actually fit the instrument cluster unlike the other 3bulb types I ordered and also very bright even in day light
Moody –
The media could not be loaded.
Easy install, test for positive side with a 9v battery and make the positive side. If installed wrong, they don’t work so rotate as directions state.
I have Blue by fuel & battery, and Ice Blue on the rest.
Rah –
These lights work great. One thing to note, as others have mentioned, is there is a positive and negative. What I did was put them all in, and then plugged the cluster back into the trucks power (the left most plug in my case). The lights should come on, but depending on how lucky you were with your placement, some may be off. Don’t worry just rotate the bulb that is off 180° and it should come on. Some people suggested that the white ink on the bulb should match the factory bulbs manufacturer stamp, but I found mine did not work that way. It was just a bit of trial and error.
Articus Opithicus –
Ignore the reviews that refer to half of the bulbs not working. These people clearly didn’t read the directions (and have no fundamental knowledge of electrical polarity). The Amazon listing AND the directions on the pack CLEARLY state you should reverse any nonfunctional diodes.
My pack contained 12 bulbs (11 for dash + 1 extra) and all 12 worked flawlessly. I installed them all, then plugged the cluster in. Only 4 illuminated. The white harness on the left (which feeds power to the lights) is long enough that I was able to spin it out the drivers door and reverse the non-illuminated bulbs polarities while the board was still hot to confirm they work as soon as the connection was made. Easy as pie. The whole thing took a grand total of maybe 20 minutes including disassembly and reassembly of the dash.
Definitely buy this pack. I can’t believe I allowed myself to drive around for years with a half burnt out, dim cluster. These new ones make the truck look 10 years younger. Much brighter, but still dimmable, it’s the perfect solution. I got the white LEDs and just like the listing says, they have a slight blue tint to them as they shine through the gauges, but it looks really, really nice.
Randy Weisenbaler –
Fit and worked well for my 04 ram. Love the blue.
DarkFury –
These LEDs really do brighten up the instrument panel. I bought the white LEDs and they shine through a 2004 Dodge Ram 1500 SLT as blue (since there is a blue tint on the panel overlay). Taking apart the dash was the scary part… however installing the bulbs wasn’t overly difficult. I wish I knew how to light this panel up for a bench test without having to plug it back in to the vehicle to see which bulbs didn’t light up. However, I plugged it in, took a picture with my phone to see which bulbs didn’t light up and reversed those bulbs 180 degrees to get them to turn on. Definitely made a visual difference in the display… very bright. Total install took me about 2 1/2 hours just because I was being super careful taking the dash apart to get to the panel (vehicle repairs like this are not something I do often). Overall I’m impressed by the product.
Robert H. –
Ok, so I got these for my 2006 Dodge Ram 1500. I watched a couple videos on YouTube and it was pretty straight forward. Actually getting the cluster panel out was much easier then it looked!
So on to review of these LED’s. I got the Ice Blue and in the day light the look really good. I can not wait to see them in the dark this evening. The reason for the 4 stars is because these are NOT dimable. On the page it says these are dimable! I freaked out when I installed them and the would come on then immediately turn off. Turned out I had the dimmer switch all the way to low. I turned everything off, turned the dimmer all the way up to brightest setting and they work fine. I tried to slowly dim them and they just shut off. So they have to stay at the brightest setting at all times! I am totally fine with this especially because they look so good!!!
Also as you have probably read… there is nothing to tell you with is – or + so just take you time, and do a 180 on any that don’t light up!