• DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

Informação adicional

Manufacturer

‎FEL-PRO

Brand

‎Fel-Pro

Model

‎Fel-Pro

Item Weight

‎4 ounces

Item model number

‎OS 30751

Is Discontinued By Manufacturer

‎Yes

Exterior

‎Machined

Manufacturer Part Number

‎OS30751

Date First Available

August 1, 2006

144 avaliações para FEL-PRO OS 30751 Oil Pan Gasket Set

  1. Julio Rodriguez

    10/10

  2. Maureen Nash

    Make sure pan flange and block flange are clean and dry. Apply a couple of dabs of sealant to hold gasket to oil pan. Then apply a continuous bead to middle of gasket and around screw holes. Carefully put pan in place, install a couple of bolts on either end, finger tight, to hold in place. Install remaining bolts and two nuts. Tighten in stages evenly from middle of pan out with final torque to seven foot pounds. (With oil pan off, take the time to remove the two 12mm bolts holding the oil pickup screen/tube. Clean the screen and tube and reinstall).

  3. Martin

    Great fit for the oil pan, Engine Oil Pan L4 1.5L 1210221010 TOP25A. Make sure to apply a line on the outline of the oil pan and then spread it with your fingers. Apply enough but don’t go over the line of the gasket inside the oil pan. No leaks so far, has been running extremely well.

  4. Amazon Customer

    Good product came as advertised.

  5. CrzyShane

    Even the Felpro website is clear that the included sealant is NOT for the lower oil pan and it should NOT be used on this gasket. Just make sure the mating surfaces are clean and dry (all previous factory sealant removed) and use the gasket only with appropriate torque on the bolts (80 in lbs/6.6 ft lbs I think). Save the RTV for another use!

  6. no name

    Good price, fit perfectly.

  7. Ann C.

    Fit!

  8. Melissa

    Works like a charm. The sealant is very odorous so definitely don’t use it inside. You will regret it

  9. Hunter

    I’ve never installed a gasket before so idk if it is the best one on the market or anything but it holds up good especially since the package came all bent up and folded and the gasket was still in good condition and works great, comes with 2 tubes of rtvbut you really only need one, overall it’s a great product and haven’t ran into any issues yet

Adicionar uma avaliação

O seu endereço de e-mail não será publicado. Campos obrigatórios são marcados com *