Frete Grátis em todos os produtos
- Part number: 7135264
- Oem equivalent part number: 7135-264
- Included components: INSTALLATION KIT
- Package Dimensions: 5.410 L x 41.097 H x 28.905 W (centimeters)
ARU Fuel Pressure Regulator Spring Replacement for The TBS 10320 GM from 11-12psi to 14-15psi Fuel Pressure Fit for 2.8L 4.3L 5.0L 5.7L 7.4L TBI Motors Length 2" Outer Diameter 1"
*$397.00
WIX Filters - 33217 Heavy Duty Spin On Fuel Water Separator, Pack of 1
*$623.60
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
Delphi 7135-264 Fuel Injector Installation Kit
*$633.70
Informação adicional
| Material | Metal |
|---|---|
| Brand | Delphi |
| Item dimensions L x W x H | 0.4 x 12.2 x 7.7 inches |
| Exterior Finish | Machined |
| Inlet Connection Type | Compression |
| Outlet Connection Type | Compression |
| Number of Ports | 1 |
| Specification Met | oem |
| Valve Type | solenoid |
| Global Trade Identification Number | 05050100260854 |
| Manufacturer | DELPHI |
| Model | Fuel Injector Kit |
| Item Weight | 11.2 ounces |
| Product Dimensions | 0.4 x 12.2 x 7.7 inches |
| Country of Origin | USA |
| Item model number | 7135-264 |
| Manufacturer Part Number | 7135264 |
| OEM Part Number | FK2, 1G1085, 28414, 2K201, 7003, E6TZ 9229-A, 218447, SK38, SK39, 800-9336 |
| Date First Available | October 10, 2007 |
DebMar –
I paid $8 or so for a “used” item which was brand new in my eyes! Thank you Delphi and Amazon!
Word of caution – when putting fuel injectors back in place and then getting the fuel lines onto the injectors be very cautious! Make sure they are on perfectly and not slanted. I got a crease in my fuel line trying to put it back onto the injector and it was impossible to get the crease out. Leaked on one injector much worse then before, unfortunately it’s going to cost me a $100 more then I planned on paying for what is supposed to be a super quick and easy job.
Take your time, don’t bend a line!!!
Doug S –
Excelent seal, best return set I’ve found, great quality
TriumphLew –
Fit perfect on my 89 7.3 idi.
The clips worked very well, the provided gas hose was enough to replace everything.
Installing the O rings is the biggest pain just because of design and location.
Make sure you lube everything in Diesel, makes life easier.
You will need to push down hard to seat the injector caps, you’ll feel it pop.
First try everything was dry as a bone and now cranks up with no delay.
Amazon Customer –
Set was missing a plastic Cap so I had to use one of my old ones, there were 8 but was missing a straight flow threw and had an extra 90 deg. Also the hose is the wrong type in my opinion, I’ve done these fix’s before a few times and used the OEM type hose, its more supple and way easier to install, the hose supplied with this kit is high pressure fuel line hose, its stiff and a pain to install , there’s no doubt in my mind that just installing it put stress on the caps and once installed there is side load on the caps, Not good, this is a next to zero pressure return line set up and there is no need to use 50psi hose.
I WOULD NEVER BUY THIS AGAIN
S Craig Cook –
This kit stopped the leak on the fuel injector return system. Several of the spring tension hose clamps Bent and deformed while attempting to install. I had to reuse some of the old clamps.
JP –
Great quality. Don’t go ordering kits online that are upcharging for the same Delphi components! The lines included are TIGHT on the injector caps for a 6.9 idi but are necessary to keep air out of the system. Superlube silicone grease helps with assembly. Fit and works perfectly on my 86 F350. Will buy again.
Jesse –
Application was 1991 F-350 7.3 IDI, N/A. The fittings only allowed for one return, this truck has one each on cylinders 1 and 5. Hose supplied was 3/16”, supplied cap fittings likely better with 1/4”, clamps supplied were 3/16”. I ended up using my old caps, and clamps, only using the O rings and fresh 1/4 fuel line. Jamming 3/16” hose over 1/4” barbs is asking for premature split hose connections. All done no leaks. Should have opted for O rings only.
Garrett Coon –
Not a super hard job to do at home in the driveway and saves you a pretty penny. I have an 87f250 but it has the 7.3 IDI, not the 6.9. This kit has everything you need to fix leaky return lines and make your old tractor run like new.
SO far a month after install still no leak. Seems to be quality. Plenty of line to get the job done.
jim –
Passt genau
Amazon Customer –
This kit is good. Works great so far. My only issue is that the hoses are smaller than the original fittings.