Frete Grátis em todos os produtos
Descrição do Produto: Corrosion Technologies RejeX 61002 (16 fl oz)
O RejeX 61002 é um sistema de revestimento inovador que redefine a proteção e o brilho de superfícies pintadas, vidro, metal, gel coat, plásticos e praticamente qualquer outra superfície dura e não porosa. Com sua fórmula exclusiva, o RejeX (pronunciado “rejects”) cria um acabamento polimérico ultra-liso e de alto brilho, garantindo que “nada grude, exceto o brilho”. Este produto é ideal para quem busca uma solução eficaz e duradoura para manter a estética e a integridade de veículos, aeronaves, barcos e muito mais.
Acabamento de Alto Brilho que Protege
A tecnologia de revestimento de alta liberação do RejeX é projetada para rejeitar a degradação UV e contaminantes comuns, como sujeira de estrada, impactos de insetos, poeira de freio, fezes de pássaros, chuva ácida, seiva de árvores, gases de escape e produtos químicos agressivos. Com o lema “Tão Liso que Insetos Não Grudam!”, o RejeX se destaca como uma solução superior para quem deseja proteger suas superfícies contra os elementos.
Nunca Mais Cera!
Ao experimentar o RejeX, você não voltará a usar cera da maneira tradicional. A estrutura robusta da matriz polimérica encapsula micro e nanopartículas super-duras em um acabamento protetor ultra-claro e quimicamente resistente que supera qualquer cera convencional. O RejeX é classificado para impressionantes 40+ ciclos de lavagem com detergente quando aplicado conforme as instruções.
Fácil de Usar
O RejeX é um produto de grau profissional que pode ser facilmente aplicado à mão ou com máquina. Os resultados são comparáveis aos caros cerâmicos de duas partes em questão de minutos. Qualquer pessoa pode aplicar o RejeX, tornando-o acessível para todos que desejam um acabamento impecável.
Protege e Embeleza
Ideal para uma ampla gama de aplicações, incluindo aviões, barcos, carros, RVs, trailers, embarcações pessoais, filmes protetores (clear bra), gráficos em vinil, adesivos e muito mais. O RejeX proporciona uma profundidade e clareza de brilho inigualáveis, elevando a estética de qualquer superfície.
### – Instruções de Uso:
1. Preparação da Superfície: Certifique-se de que a superfície esteja limpa e seca. Lave o veículo com um detergente neutro e seque completamente.
2. Aplicação: Aplique uma pequena quantidade de RejeX em um aplicador de espuma ou pano macio. Espalhe uniformemente sobre a superfície em movimentos circulares.
3. Secagem: Deixe o produto secar por cerca de 15 a 30 minutos, dependendo da temperatura e umidade do ambiente.
4. Polimento: Após a secagem, utilize um pano limpo e seco para polir a superfície até obter o brilho desejado.
5. Cura: Para melhores resultados, evite lavar a superfície tratada por pelo menos 24 horas.
### Características do Produto:
– Volume: 16 fl oz (473 ml)
– Tipo de Produto: Revestimento polimérico de alto brilho
– Durabilidade: Até 40+ ciclos de lavagem com detergente
– Aplicação: Manual ou mecânica
– Compatibilidade: Superfícies pintadas, vidro, metal, gel coat, plásticos
– Resistência: Protege contra UV, sujeira, produtos químicos e contaminantes
– Acabamento: Ultra-liso e cristalino
### Perguntas Frequentes (FAQ):
Pergunta: O RejeX pode ser usado em todas as superfícies do meu carro?
Resposta: Sim, o RejeX é seguro para uso em superfícies pintadas, vidro, metal, plásticos e até mesmo em rodas e cromados.
Pergunta: Quanto tempo dura o efeito do RejeX?
Resposta: Quando aplicado corretamente, o RejeX pode durar até 40 ciclos de lavagem com detergente, oferecendo proteção prolongada.
Pergunta: É necessário preparar a superfície antes da aplicação?
Resposta: Sim, é fundamental que a superfície esteja limpa e seca antes da aplicação para garantir a melhor adesão e resultados.
Pergunta: Posso aplicar o RejeX em condições climáticas adversas?
Resposta: É recomendado aplicar o RejeX em condições secas e em temperaturas amenas para obter os melhores resultados.
Pergunta: O RejeX é seguro para uso em veículos com películas protetoras?
Resposta: Sim, o RejeX é seguro para uso em superfícies com películas protetoras, proporcionando uma camada adicional de proteção e brilho.
G. Celdran –
This Stuff really Works. Wash your car Really, Really, Supper well and then coat it with RejeX. (2 coats) It will seal you paint and basically replace or seal your clear coat with a supper hard and supper slick finish. Dirt and grime will easily rinse off. The first time it rained after using this I went to look at my Caravan and it was sparkling clean. For best results apply twice a year. I only applied it once and I still saw benefits 2 years later. This stuff will make your Paint last a lot longer. OK to use on Glass windows and Plastic Lenses. Water will bead up and slick off easily. Keep off of rubber gaskets, plastic panels and bumpers.
Mike –
Rejex can last a year, easy. Just follow the directions: clean the car well. In my case I polished it and then applied 1 coat. The next day applied a second one, this will give more depth. The car becomes super slick. Nothing sticks to it. Now, keep in mind this is not a wax, therefore, it will not mask imperfections. Some scuffs might show more. I was using synthetic wax but got tired of having to wax the car every 2 months.
This stuff is great, maybe the best out there for durability, shine, ease of use and results. I applied it with an old sock and then used a microfiber to remove. Don’t put too thick. Just apply 2 coats and you will not be disappointed.
G. Celdran –
Bought this because it was highly recommended for my motor home. I’ve read all the Amazon reviews and here is my experience with Rejex.
1. You must follow the instructions to get acceptable results. No exceptions.
2. It is easy to apply by hand and wipe off. No buffing needed nor a buffing wheel.
3. Your RV MUST be pre-polished. You can not apply this to a dull and oxidized finished. If you do, you will be disappointed. It is NOT a POLISH or WAX as the product states.
4. As far as the gloss finish, does a very good job. But, you have to do item-3 above first. I did a comparison of Rejex with Meguiar’s #56 Marine/RV Pure Wax. The #56 is a hair better in the gloss and a cost a lot less.
I have found that using Star Brite RV Polish followed by Rejex or Meguiar’s #56 gives a very good protective and UV protection gloss.
Flagirl16 –
I’m a long-time car guy, I’ve tried all sorts of wax products. But the last one I will probably ever purchase is RejeX. It just looks great and lasts – on cars and a Class A motorhome. There are all kinds of waxes and ceramic coatings on the market, some are better than others. I personally have found that, for the price, RejeX imparts the best, longest lasting finish I have ever seen on a painted surface or glass. It has been a year since I applied it to our motorhome, I recently washed it and found that the water is still beading up, absolutely incredible!
John H –
This is great stuff. Water still beads on my truck and the last application was two summers ago. I just finished putting it on the RV. Looks good and with luck I won’t have to do it next year. Put it on light and take it off easily. Put it on like wax and you’ll work a lot harder getting it off.
SkervyDawg –
Really brings the paint out on the vehicle. Won’t work on a dull or oxide paint. Has to have an existing clear coat but it really makes the color deepen. So smooth it’s like a babies butt….well I don’t know really about that… just go with the saying.
Flagirl16 –
I live in Florida so I wanted to find a product that would withstand the intense sun/heat while making bugs easy to remove while giving an amazing shine, Rejex fit the bill perfectly.
I’ve read some of the negative reviews so I did a little bit of searching before apply Rejex so here are some tips that might help others.
FOLLOW THE DIRECTIONS!!!
Rejex is a polymer, not a wax. As such, it should be applied to clean, dry paint. If you apply it over another wax product, it probably won’t last as long. Here are my steps/suggestions to make applying it as easy as possible and to make sure it lasts on your vehicle.
I washed my car with Dawn dish soap initially. Dawn is great for removing the previous wax coat so the Rejex can bond with the paint.
I thoroughly dried the car then put it in the garage to get it out of the sun. I let it sit for an hour or so in the garage to make sure the paint was cool to the touch.
I used terrycloth applicator pads I bought on Amazon to apply the Rejex. A little goes a long way. The key to easy removal is to not put it in heavy.
Shake the bottle before using.
Work in sections, I do one panel at a time. I apply it in a thin coat, let it dry to a haze for about 15 minutes and then wipe it off with a microfiber towel. If you want to multi-task, start applying it to a second panel, by the time you finish with the second panel, the first panel should be ready to wipe off.
I found that I needed to be careful around black window trim and textured black plastic trim pieces. When you get some on the trim, it can leave a white haze to the trim pieces. I used Mother’s Back to Black and it cleaned those areas very well making the trim black again.
Streaks – Some reviewers complained about streaks. If it’s streaking, it’s probably being applied to thick or you’re not waiting long enough for it to dry to a haze. It should remove easily and be streak free. In the event of streaks, apply less on the rest of the panels and when finished, use a detailing spray to go over the streaky spots, removes it very easily.
I also use Rejex around my home to help keep things clean. It works great on sink and shower chrome faucets. It also works great on the shower glass to keep soap scum to a minimum, my wife really loves that part.
A few other tips for removing bugs. While Rejex does make it easier to remove bugs, here in the hot Florida sun, it doesn’t take too long with the car sitting in the hot sun to bake those bugs onto the finish. I take a cheap, white terry cloth towel and wet it thoroughly and then lay it across the front of my car where the bugs are baked on. I let it sit for about an hour and then remove the towel and spray the area with some detail spray. Using a microfiber cloth, the bugs come off very easily. Remember to turn the MF towel so the bug shells don’t scratch your paint.
For future washing, I use a soap specifically formulated for car washing so it doesn’t strip off the Rejex. If applied correctly, I found that it will last about 6-7 months in the Florida sun before it’s time for another application. If your vehicle is kept in the garage, it should last almost a full year.
I’ve read reviews on other products where people got the stuff for free or seriously discounted for their reviews….not me….I paid full price, no discounts, perks or anything else. I’m just lazy and have better things to do on the weekend than waxing my vehicles so I wanted a product that would protect my car, keep it looking good and help me remove these darn Florida bugs without scrubbing until my arm falls off so Rejex works well for me.
David R. Lamberth –
Spent a few days applying this to my 34ft Dynamax Isata 5 Class C RV. Easy to apply just took time given size of RV, wanting to apply 2 coats (for a 5mth cross USA and return via Canada roadtrip) and finding several consecutive cloudy/partial sun days to do job in usually sunny sunny Arizona. Worked amazing on our 11,000mi trip, easy to clean off bug splatters on front of RV with only a damp rag and dry rag, near zero elbow grease required.
And when gave RV couple of washes over trip, microfiber dried surface and exterior shined like brand new.
Took almost 1 bottle to apply 2 coats on 34ft RV, top to bottom. Well worth it