Frete Grátis em todos os produtos
- Remanufactured In the USA
- All units are 100% factory tested before packaging
- Clean injectors provide better gas milage and increase overall performance
- All injectors are lubricated prior to packaging ensuring a trouble free installation
Fuel Injection Pressure Regulator for Hyundai Sonata 2.5L 1999-2001, Santa Fe 2.7L 2001-2006, Sonata 2.7L 2003, Tiburon 2003, for Kia Optima 2.5L 2001, Optima 2.7L 2002-2006
*$409.00
Fuel Rail Injection Pressure Sensor for 2006 Ford E-450 Super Duty 6.8L 415Cu. in. V10 Gas SOHC Naturally Aspirated
*$397.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
AUS Injection MP-10277 Remanufactured Fuel Injector – 1993 Toyota With 3.0L V6 Engine (Renewed)
*$771.70
Informação adicional
| Manufacturer | AUS INJECTION INC. |
|---|---|
| Brand | AUS Injection |
| Item Weight | 3.06 ounces |
| Package Dimensions | 7.6 x 3.19 x 2.09 inches |
| Country of Origin | China |
| Item model number | MP-10277 |
| Exterior | Plastic |
| Manufacturer Part Number | MP10277 |
| Date First Available | March 22, 2006 |
Robert H. Schoon –
I have to admit I took a chance on these parts. I was nervous about parts that were sooo much lower in price than anything else I had seen. The factory price for these parts was nearly $200. The best price I had seen anywhere else was $145 ea. I read the description for these and saw that it seemed to be a reputable company with a warranty so instead of just replacing the one failed injector on my 4Runner (at 140,000 miles) I went ahead and bought all six at this low price. I looked these parts over very carefully when they arrived. They were nicely packaged, with protective caps on both ends of each and lubrication inside the caps to assist with installation. I could see no reason not to proceed with the repair. I installed these parts last night and the truck fired right up afterward and showed no signs of any issues during a 30 minute test drive. It is running great now, much, much better than it was. I don’t know if there is some other “gotcha” that could happen down the road but, right now, I am an extreeeeemly satisfied customer.
Justin Chard –
So far so good. Cheap and fixed my bad injector issue. 4runner runs like a champ again.
John Cruz –
Once I realized that one of the injectors on my ’97 4Runner was kaput, I checked online for a replacement. I stopped by a Toyota dealer site, but the $180 price for a new injector made me frown a little. Then I found this remanufactured gem made by AUS Injection. I was not sure what to expect quality-wise, yet the very affordable pricing on Amazon compelled me to take a chance.
The improvement in engine performance, after installation, was remarkable. No more hesitation at slow speed. No more sluggish acceleration. No more rough idling.
Like the previous reviewer, I suspected a catch to this bang-for-your-buck product, and indeed there was at least one: The electrical core inside the injector was probably not remanufactured. Neither Amazon nor the AUS site said that any revitalization was done to the electrical components. AUS simply tested for functionality.
While it is rare that injectors fail electrically, this failure was the very reason for replacing my injector. But maybe I’ll be lucky this time around. All I can do now is enjoy the smooth, healthy purr of my V6 as I keep my fingers tightly crossed.
Marc A. Geisbauer –
1 out of 5 leaked be careful and check before u put your motor back together!!
Jessika –
Originally had an intermittent engine miss that was finally determined to be fuel related.
I was a little skeptical to use a ReMan product but when compared to the $140.00-$180.00 price for the new versions and with Amazon’s great return policy, I thought I’d take a chance.
I was pleasantly surprised that these worked just as good as new as soon as they were installed.
Came with all the needed seals for the injectors (you will need to purchase a set of two plenum gaskets since you need to take the top plenum off to get to the RH injectors and the bottom plenum off to get to the LH).
Be sure to put a little grease on the top & bottom o-rings when installing.
Not a bad idea to get an extra set of rubber seals (Beck Arnley 158-0893 Fuel Injection O-Ring Kit) since it’s easy to tear one (as I did) when re-installing the fuel rail.
Have put about 6,000 miles on the vehicle since they were installed and they work great.
Joey –
I bought one for my 4Runner worked great for 2 weeks then I had same problem again,went back to the shop cheked the injectors it was the one I just replaced went bad.
I ordered replacement it was bad too resistance out of spec now waiting for the third replacement.
Jaron Hedrick –
Arrived on time and well packaged. Works great completely solved my issue. If you aren’t replacing all injectors you will need to get new o rings for the old ones. Once you have the fuel rail off just give them a twist and they will slide right out. When reinstalling spray o rings with carb cleaner and the will slide in with no problem. Very happy
JR Lopez –
Got car running smoothly again with quality part at great price.