Descrição do Produto: AlumAseal ASD24/2 Radiator Stop Leak Powder Tube Dispenser – 20 g
O AlumAseal ASD24/2 é a solução definitiva para vazamentos em sistemas de arrefecimento, oferecendo um tratamento seguro, rápido e eficaz. Este pó selante em tubo de 20 g é projetado para interromper vazamentos em radiadores e sistemas de arrefecimento de forma prática, sem complicações. Com sua fórmula inovadora, o AlumAseal é seguro e eficaz para todos os componentes do sistema de arrefecimento, incluindo partes metálicas, plásticas e de borracha.
Uma das principais vantagens do AlumAseal é que ele não entope os sistemas de arrefecimento, garantindo que o fluxo de líquido refrigerante permaneça ininterrupto. Além disso, é compatível com todos os tipos de anticongelantes e fluidos de arrefecimento, tornando-o uma escolha versátil para qualquer veículo. O produto é capaz de tratar sistemas de arrefecimento com capacidade de até 22 quarts (21 litros), oferecendo uma cobertura ampla e eficiente.
Instruções de Uso:
Para utilizar o AlumAseal ASD24/2, siga os passos abaixo:
1. Certifique-se de que o motor esteja frio e desligado.
2. Remova a tampa do radiador ou do reservatório de expansão.
3. Agite bem o tubo de AlumAseal antes de abrir.
4. Despeje todo o conteúdo do tubo diretamente no sistema de arrefecimento.
5. Recoloque a tampa do radiador ou do reservatório.
6. Ligue o motor e deixe-o funcionar em marcha lenta por aproximadamente 10 a 15 minutos para permitir que o produto circule pelo sistema.
7. Verifique se há vazamentos após o tratamento.
Características do Produto:
– Tipo de Produto: Pó selante para radiadores
– Volume: 20 g
– Capacidade de Tratamento: Até 22 quarts (21 litros)
– Compatibilidade: Todos os tipos de anticongelantes e fluidos de arrefecimento
– Segurança: Não entope sistemas de arrefecimento
– Material: Seguro para uso em componentes metálicos, plásticos e de borracha
O AlumAseal ASD24/2 se destaca no mercado por sua eficácia comprovada e facilidade de uso, tornando-se uma escolha ideal para motoristas que buscam uma solução rápida e confiável para vazamentos em seus veículos.
Perguntas Frequentes (FAQ):
Pergunta: O AlumAseal ASD24/2 é seguro para todos os tipos de veículos?
Resposta: Sim, o AlumAseal é seguro para uso em todos os tipos de veículos, independentemente do material do sistema de arrefecimento.
Pergunta: O produto pode ser usado em sistemas de arrefecimento que já possuem vazamentos grandes?
Resposta: O AlumAseal é mais eficaz em vazamentos pequenos a moderados. Para vazamentos grandes, recomenda-se consultar um mecânico.
Pergunta: O AlumAseal afetará a eficiência do meu anticongelante?
Resposta: Não, o AlumAseal é compatível com todos os tipos de anticongelantes e não afetará sua eficiência.
Pergunta: Quanto tempo leva para o AlumAseal começar a agir?
Resposta: O produto começa a agir rapidamente após a aplicação, geralmente em 10 a 15 minutos de funcionamento do motor.
Pergunta: Posso usar o AlumAseal em um sistema de arrefecimento que já foi tratado com outro selante?
Resposta: É recomendável limpar o sistema de arrefecimento antes de aplicar o AlumAseal para garantir a máxima eficácia.
Superhero –
Had a Tiny leak leaving a small puddle in either my Radiator or Core I guess. Poured this in, ran the car with the heat on as instructed. Leak stopped dead. Checked it a week later…not a drop. Heard from People it could muck up my water Pump etc. so I went back to the Auto Parts store I bought it & asked if I should replace my fluid to get the excess out of there, looked on line too & no need. It’s not like the old snot like stuff that was just a quick fix. Safe to use, worked fast, done. Very satisfied.
Nick M. –
This radiator only lasted two years and then began leaking a lot. I had a mechanic replace it with another. What a disappointment.
Ypp –
ちょっと、粉が浮遊するのがネックですが、もう10年お世話になってます❗
The Movie Guy –
I used this on a 2000 Ford Expedition. I was getting a strong coolant smell after traveling less than a mile. As a temporary alternative to replacing the heater coil, he recommended Silver Seal. Unable to find that product at my local store I got Alumaseal, because it did have the word “seal” in it. As per my mechanics instructions, I ran my vehicle first to get the coolant warm. My “radiator” cap is on top on my reservoir so I can safely remove it while it is hot or the engine is running. I added a container of this stuff and drove it around for 40 minutes with the heater going. It had apparently worked fairly well, but I was still getting an occasional whiff of coolant so I added a second batch, which the manufacturer says may be necessary.
I don’t smell the coolant any more and my level seems to stay the same. My mechanic claims it should last until I start using the heater. By then I can decide if I want to spend the $600 to repair the vehicle or trade it in. The sealant worked as I expected, but it is a band-aid and not a cure-all.
Jim Reed –
Ram 3500 with Cummins diesel
joe markie –
awesome stuff best on the market today
Clyde J –
Works great just like always, been using it for over 30 years,
Ron R. –
Have used this product in the past with very good results, highly recommend, Shipment was very fast. Very pleased with everything.
Ron
Charlie C. –
I put the stop leak product in and followed the directions as stated on the back on the tube. Then I still saw the same leak from my radiator! The reviews looked promising and cheaper than a new radiator, but I guess a new radiator is the now the only option!
テペッピ –
2回目(2台目)の使用です。粒子がでかくて入れるのにはじめ躊躇しますが、量販店で売っていた他のものより確実な効果が安定して得られると感じました。うちはクルマ3台あるので、予備も購入してあります。