Frete Grátis em todos os produtos
- Direct Plug In Factory Replacement Plug And Play
- All New Cast Aluminum Housings for durability
- OEM Style Ignition Modules for Trouble-Free Service
- High-Quality Distributor Gears
- Long Sintered Bushings for Long Life
NGK LKAR7BIX-11S Iridium IX Spark Plug (93501 Iridium Ix), 4 Pack
*$525.30
2 Ignition Coil Pack with 4*Spark Plug Fit for 1997-2000 for Toyota 4Runner 1998-2000 for Toyota RAV4 1999-2001 for Toyota Solara, Replace UF180
*$767.70
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
ACCEL 59130 Performance Distributor HEI with Coil
*$1,408.40
Informação adicional
| Manufacturer | Accel |
|---|---|
| Brand | ACCEL |
| Model | 59130 Accel Performance Distributor HEI – Chev V8 265-454 – W/Coil |
| Item Weight | 6.98 pounds |
| Product Dimensions | 8.4 x 17.1 x 7.6 inches |
| Country of Origin | China |
| Item model number | 59130 |
| Is Discontinued By Manufacturer | No |
| Exterior | Machined |
| Manufacturer Part Number | 59130 |
| OEM Part Number | 59130 |
| Date First Available | August 14, 2018 |
iPhone –
The distributor arrived without visible damage and appeared to be made well. The electrical connections looked good, although I failed to miss a section of the cap was broken. The install went well in a 68′ C-10, and I put new plugs in at the same time. I didn’t notice the cap broken until I went to plug in the power/tach connector and found a small section of the cap where the locking tabs are was missing. The connector would not stay secure. It too late to run for a new cap and I didn’t want to put the used on back on, so I used a wire tie to temporarily secure it. After everything was back in place, the truck started right up and idled nice from the start. I set the timing and took it for a ride, what a surprising difference. The distributor made a huge difference, and the truck ran smoother than ever. The old distributor had a flutter right around 3K rpm’s and once I removed it, the bottom of it looked like it had been on a vehicle drug out of a lake. Not surprising, as to most of the systems on the truck were so badly hacked up it has been over a year of making things right. Tonight, finally brought some pleasant calm to the project as it very smoothly went through the gears.
Therefore, if it wouldn’t have been for the cap, I would have given it 5 stars. The cap walls do seem fairly thin though compared to the NAPA one I had one it.
Happy wrenching!
jdub –
INSTALLATION WAS A BREEZE. fIRED RIGHT UP AND NOW HAS A DEPENDABLE HEI DISTRIBUTOR. a LITTLE MORE THAN THE OUTSHORE JUNK FOUND ON AMAZON. BUT WELL WORTH IT. NO REGRETS WITH ACCEL.
Chris Duffield –
Overnight delivery. Set it up and back running quickly
Daniel Smith –
The process in manufacturing this “Top of the Line” in spark delivery is the best for use in “First Class ” production of this and their other products. This model and its “relative’s, have shown to be exceptional in their designs,I installed the distributor I’m replacing in 2015, never had any issues with it (once I installed a AC Delco Professional spark controller) even on “Custom” application engines (I’m converting a 1994 2” TBI fuel delivery system on my 8,600 lbs GVW K2500 to a 600 cfm Holley Brawler, with a “Stand Alone” HEI distributor (This model) The housing of this highly rated distributor and the throttle cable ailment guide/hold down assembly are both made from 6061 aircraft aluminum, the difference is this is polished and stressed relieved cast and the guide is machined from solid billet, and anodized, both with stainless steel fasteners. This has brass and copper electrical contacts . It Makes for a Very “Cost Effective”, simple installation process . Using the supplied gear grease as the “friction” modifier insures that the drive gear won’t gall up or overheat during the breaking in process . (The “Looks” I get from folks when I tell them I’m going “Old School” – from a “ computer controlled fuel injection, ignition system” to a 4 Barrel Holley, stand alone HEI ignition Accel distributor on a 3/4 ton, 4 X 4) is Priceless. Thanks to Amazon for selling the necessary items from the smart Folks at, “Accel”, General Motors, Kahos and Holley- (All are so easy to adjust and Fine Tune)
Larry Denham –
I had problems with cheaper products trying to save a few bucks. Not worth the ACCEL may be made on China but the specs are tight. For example all the cap plug wire connections are brass and machines after assembly for true co centricity.
The timing curve was near perfect, no misses easy starts awesome, highly recommended
1981. Chevy Camaro small block
Kev –
Works great awesome spark
Karl –
I am giving this 3 stars based on the information provided that said it would fit my 57 Belair with a 283. I even call the manufacturer and specified that the engine was installed and asked will it clear my firewall and they said it would. It did not I had to send it back. I am sure the operation would have been fine but this was a big waste of time.
Timothy guy –
If you are still running hei ignition you can’t afford not to buy this it’s setup perfectly light counter weight springs heavy counter weights I popped the coil cover and ingraved part number said msd coil plus all the electronics is new plus a advance limiter if your going to use the vacuum advance great old school setup perfectly priced great value
Justin L Spencer –
Fast delivery. Worked great right out of the box. Quality distributor.
Scott Hendrick –
I’ve ordered and used this particular distributor multiple times. They always work great right out of the box and don’t have the extreme timing issues I’ve run into with other off brand distributors. The vacuum advance limiter is easy to install and change if needed. No surprise that this one worked great right out of the box. Fantastic value!