Frete Grátis em todos os produtos
- 6AN to 3/8 Quick connect hardline fitting adapter
- Compatible with all fuel type
- Made of aluminum – Anodized black finish
- What’s in the box: 1 piece adapter
Electric Inline Fuel Pump Low Pressure for Carburetor Universal 5-9 psi 12 volt w/Filter Clamps Kit E8012S P60430
*$395.00
Polaris Snowmobile Control Assembly, Left, Genuine OEM Part 2010369, Qty 1
*$1,080.50
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
6AN to 3/8 Hardline Quick Connect Fitting Adapter
*$361.00
Informação adicional
| Size | 6AN – 3/8 in |
|---|---|
| Material | Aluminum |
| Brand | K-MOTOR PERFORMANCE |
| Color | Black |
| Item dimensions L x W x H | 1 x 0.5 x 0.5 inches |
| Connector Type | Adapter |
| Exterior Finish | Anodized |
| Thread Type | E85 |
| Number of Pieces | 1 |
| Manufacturer | K-Motor Performance |
| Item Weight | 0.634 ounces |
| Product Dimensions | 1 x 0.5 x 0.5 inches |
| Country of Origin | USA |
| Item model number | 6AN-3/8-Hardline |
| Style | Quick connect fitting |
| Finish | Anodized |
| Included Components | (1) Hardline adapter |
| Batteries Included | No |
| Batteries Required | No |
| Date First Available | March 15, 2022 |
Leticia S. –
trying to run a ptfe fuel line on a polaris rzr turbo which has a plastic 3/8 efi fitting coming off of the fuel pump housing. this connector it to tight to slide over. i guess its only for steel line.
Amazon Customer –
This adapter is a must-use with metal fuel line to braided fuel line conversion. I got 1 and ended up with a second to have as a spare. The adapter comes in either 5/16 or 3/8 size to -6AN or-8AN depending size chosen. When I did my engine swap in my Acura I wanted to switch both my fuel feed and return lines from the metal hardline to an 8-AN feed -6AN return and ad adjustable fuel pressure regulator. I used the Fuel Hardline Tube Push-on Adapter on my fuel pump hanger to do the conversion. Recommended for all those looking to convert the fuel hardline.
Jake –
Good quality fitting. The finish is nice and it looks good. More importantly, it work good as well. Fit right on the push on line and the collar held it snuggly. The -an side screwed right on with no burrs or problems of any kind. Both sides sealed up well with no leaks.
Andrea Cronin –
These things are fantastic, fit great on my GM quick connect fittings and they’re the only ones I found that fit the short ones or the ones with immediate bends. Saved my bacon with my AN replacement lines.
Oakley –
I have several K-Motor parts on my vehicles and have never had issues with them. Good quality parts. This one is no different. The finish is nice and good looking. The engagement on the hardline is good and you can see inside it has O-Rings. Already lubed. Follow the directions and you wont have any issues. This is a nice adapter if you are trying to go to AN fittings and hoses. It will work on alot of applications too. It has a small set screw to help keep it from pushing back off. Overall I recommend K-Motor Parts 👍
Amazon Customer –
This item didn’t work. I have a 1967 Camaro RS/SS…3/8″ stock fuel line, not modified in any way. Item description, push and twist at the same time, my ass!! I put a little grease on fuel line lip and the item, 2 professionals tried it without any success. Didn’t try a hammer, but that’s what I should done with it! This was a waste of my time.
Chuck L –
6AN to 3/8 Quick Connect Fitting – Fuel Hardline Tube Push-on Adapter. Push-on adapter end fit tightly on my GM 3/8 steel hard fuel line with no leaks. 6AN connector end sealed tightly to 6AN 90-degree fuel line connector with no leaks.
Double inner o’ring seal on the push-on adapter side. Red slide lock clip is retained by a small cap screw. Black and Red anodizing has no visual flaws. Very happy and would recommend this adapter if you are looking to connect braided 6AN fuel line to your factory GM steel line.
Roberto –
I got this for v8 swap I am working on. I have this installed on the connector that goes from the custom fuel AN fuel line to 3/8 fitting. The initial mock-up seems good, but I won’t know for a month or two how well it holds pressure.
I have no doubt it will hold up as the quality, fit, and finish is comparable to some expensive fitting I have purchased for my AN tubing for other parts of my build. For now, it gets 5 stars, I will update if that changes.