Frete Grátis em todos os produtos
- Color: red.Housing Material: Polycarbonate (PC).Contact material: Pure copper silver plating.Rated Current: 50A.Rated Voltage: 600V.Voltage:For 12v or 24v Use.
- Vibration Resistance: Excellent.Impact Resistance: High.Average contact resistance: 0.05MΩ.Voltage proof: 2200V (DC).Insulation resistance: 500MΩ.
- No load (Contact/Disconnect Cycles): To 10,000.Under load (Hot Plug 250cycless@120V): 50A.
- Flammability Rating of Housing Material: UL94 V- 0.Operating temperature range: -20°to 105°.
- The Plugs is Impact Resistant Polycarbonate and Connectors are Silver plated Solid Copper Terminals.Provide simplified assembly and minimize the number of components.Silver plated copper contacts inside housings that strongly force the contacts together.
Road Power 84678802 12-Feet 8-Gauge Medium-Duty Booster Car Battery Jumper Cable Foot Yellow
*$481.90
Skunk2 625-05-0060 Billet Battery Tie Down
*$709.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
50 Amp Red Connector Battery Charger Battery Power connectors for Anderson 50Amp Red (8AWG)
*$361.00
Informação adicional
| Brand | Sunshine |
|---|---|
| Connector Type | Barrel Connector |
| Compatible Devices | PC |
| Included Components | 10 x housing, 20 x Terminal |
| Color | red |
| Input Voltage | 12 Volts |
| Amperage | 5E+1 Amps |
| Specification Met | UL |
| Material | Polycarbonate |
| Output Voltage | 6E+2 Volts |
Mathew Nessel –
The inner clip does not allow the head connector to clip in to place and they will not make a completed plug as the head connector does not clip into place!!
BAD head contact wire crimp ends !!! To Short to clip into place.
I should get a refund but not worth the FIGHT ! ! !
JP –
Junk. Does not fit with real Anderson connectors. Do not buy
Virtual1 –
They’re not Anderson brand, but they seem to be pretty good quality. Tolerances are good, and they come with good quality contacts as well. I need these to be easy to connect and disconnect, without being prone to popping apart on their own or with a light tug. With proper crimping/soldering, these get the job done. Some of that will of course come down to technique, like making sure the wire leads straight away from the contact, but I didn’t run into any problems with these. They shipped in a basic bubble pouch, which was adequate protection.