Frete Grátis em todos os produtos
- 2 Pcs L-type Mounting Brackets +2 Pcs Flat-shaped Mounting Brackets — 10MM Ball Stud Bracket for Mounting Lift Supports Gas Shocks, Color: Black.
- 10mm Ball Stud Mounting Brackets — 2 Pcs Angled Mounting Brackets +2 Pcs Flat-shaped Mounting Brackets+16 pcs screws) in a package; Made from steel and zinc plated;
- High-quality widen ball stud mounting brackets — Two flat brackets are best for side frame mounting and two angled brackets are best for mounting on lid/cover/door;
- 4pcs Pack 10mm Ball Studs Mount for Gas Strut of Various Pressure — universal mounting bracket for All arana lift support shock and most gas struts of other brands (include 16 pcs screws)
- 10mm Gas Shock Mounting Brackets — 18 Months Support– If any questions or dissatisfactions before/after purchasing or need installing/using guide, please message ARANA directly to let us provide in-time assistance to you!
AutoShack Front Complete Strut & Coil Spring Assembly with Rear Shock Absorbers Set for Chevrolet Tahoe Suburban 1500 GMC Yukon 4WD | Full-vehicle Suspension System Replacement...
*$2,071.60
MOOG K6541 Front Lower Suspension Ball Joint for Chevrolet Silverado 1500
*$525.10
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
10MM Ball Stud Widen Mounting Brackets for Universal Gas Struts Lift Supports Shocks Spring Prop 4PCS, Silver(Bigger Version)
*$343.00
Informação adicional
| Manufacturer | ARANA |
|---|---|
| Part Number | ARA-JT050 |
| Item Weight | 8.4 ounces |
| Package Dimensions | 3.55 x 2.21 x 1.46 inches |
| Country of Origin | Hong Kong |
| Item model number | 99f6e575-85f0-460c-8048-4be1f409f253 |
| Size | 2 L-Type + 2 Flat-Type |
| Color | Silver |
| Style | Widen |
| Material | Zinc Plated |
| Included Components | Mounting Brackets ×4 |
| Batteries Included | No |
| Batteries Required | No |
| Date First Available | October 20, 2023 |
![KEYOOG 2Pcs Set K640286 K620048 Right Left Rear Upper Control Arm Assembly For 92-01 Ho-nda CR-V [92-00 Civic del So] 97-00 Ac-ura EL [94-01 Integra] Passenger & Driver Side...](https://m.media-amazon.com/images/I/51Q60j7NkKL._AC_SL1100_.jpg)
Rex –
They are easy to install and work with multiple size shock absorbers.
Alex –
I purchased these to fix a door on my utility shell for my truck. They’re good quality and worked with the gas shocks I had. Worked great with rivets and resolved my problem.
KK –
Well made, just wasn’t what I wanted.
Amazon Customer –
quality folding stair project.
Northern man –
Excellent mount
Buckie Harrison –
Great Quality an fit my 97 Aerostars back hatch struts perfectly. Got creative to mount them to the hatch but holds that heavy thing up no problem. Would buy again if needed.
Bruce –
Fits my trailer great
Boat Electrical System Designer –
These brackets are sturdy, but NOT stainless steel as advertised. They are obviously carbon steel with zinc plating, and they are magnetic. Also, the rivet on the back of the ball stud protrudes ~2 mm (5/64)” beyond the surface of the back side of the bracket, which means they will not mount flush without a countersink hole for the rivet head. That said, a countersink hole made with a forstner bit of the right diameter and depth could be useful to precisely locate the ball stud before pre-drilling the screw holes using the bracket as a template; the rivet is not deep enough to offer much lateral strength in its countersink hole, but it would be useful as a locator. Related, the rivet has a solid head compared to the hollow type on some other similar brackets, and this ball stud rivet looks to be sturdy (but looks do not necessarily relate to strength). Lastly, like so many others point out, the screws that come with these brackets are a waste of time, totally inadequate for such a bracket for all but the lightest loads, and also zinc plated steel and not stainless steel. They are the metric equivalent of #7 x 5/8″ pan head sheet metals screws (measured 3.8 x 16 mm), far too small for the loads such a bracket will encounter, especially if not mounted flat with the countersink hole mentioned above. Considering the bracket thickness (~3mm), these screws would only penetrate ~0.5″ (~13mm). #10 x 1″+ (as long as the backing material will enable), preferably screws with a shoulder so solid screw shaft versus threads bear against the bracket, is what is required for the typical lateral loads on such gas string ball studs. The three bracket holes measure 0.2″ (5.08mm), which is about half way between #10 and #12 screw thread diameter, so call the holes suitable for #10 screws, if not 5mm metric size. Per AWC-NDS Table 11M, the maximum lateral strength of wood screws holding a metal bracket to wood is reduced if the wood penetration is less than 10 times the thread diameter, then the derating factor is the number of actual diameters of wood penetration divided by 10 down to 6 diameters (60%), then complex formulas are necessary, but the same ratio is indicative of the best of might be. The screws provided (3.8mm x 16mm) through a 3mm thick bracket will penetrate the wood by 13 mm, thus the penetration is 13 divided by 3.8 = 3.4, which is far below the point where formulas would be required, and then if the linear derating applied as a rough indicator, which is the best it might be, then the screws will have lateral strength 34% of the maximum. E.g., per Table 11M, for this bracket thickness (3 mm, ~11 gauge), and screw diameter (3.8mm, ~#7), in Hemlock-Fir Wood (typical), one screw would have a maximum lateral strength of 86 lbs. Then applying the derating factor of 34%, 29 lbs. Three such screws would provide a lateral strength of 88 lbs. Reality would be less, for two reasons: 1) because the ratio derating method does not work below 6D penetration, and alcos because these screws are so much smaller than the holes, likely the bracket would not bear evenly on all three screws and one of them would bear more than it’s share of load. And then once the screw that is overloaded deforms the wood until the other screws engage, it gets even weaker. So the screws provided are only good enough for a 29 lbs lateral force applied by the gas spring. Then considering the spring K factor, which is how much higher the nominal spring force when fully compressed, typically 1.35, this means any spring with a nominal force over 21 lbs (29 lbs when compressed) will overstress these tiny screws in Hemlock-Fir wood.
Bryce A –
The media could not be loaded.
Solid, durable. Holding up 2 – 35lbs gas struts lifting a 45lbs oak table. No complaints, would order again.
Light-Zone –
The media could not be loaded.
I’m glad the brackets were NOT included with the struts I purchased because I wanted something heavy duty and these fit the bill perfectly. I did use my own screws rather than those that came with the flanges, but that was more or an aesthetic decision than a question of quality. But, the lid I was constructing did weigh 50 pounds so a somewhat beefier screw seemed warranted.