### Carregador Inteligente Automático 10A para Baterias de 12V
O Carregador Inteligente Automático 10A é a solução definitiva para quem busca eficiência e segurança no carregamento de baterias de veículos. Com uma corrente de carregamento de 10 Amp, este carregador é ideal para baterias de 12 volts, proporcionando um carregamento rápido e eficaz, adaptando-se à capacidade da bateria e ao tempo de carga necessário. Seja para automóveis, caminhões, motocicletas, cortadores de grama ou embarcações, este carregador é a escolha perfeita para manter suas baterias em ótimo estado.
#### Segurança em Primeiro Lugar
Desenvolvido com um design de segurança robusto, o carregador automático conta com múltiplas proteções: proteção contra curto-circuito, sobrecarga, sobrecorrente, sobretensão e inversão de polaridade. Além disso, o sistema de ventilação ajusta a velocidade do ventilador conforme a carga e a temperatura, garantindo um funcionamento seguro e eficiente.
#### Função de Multi-Corrente
Equipado com a mais recente tecnologia de microprocessador, o carregador detecta automaticamente a voltagem da bateria e monitora todo o processo de carregamento. Assim que a bateria atinge 100% de carga, o dispositivo desliga automaticamente, evitando sobrecargas e prolongando a vida útil da bateria.
#### Display Digital LED
O carregador possui um grande display LCD que exibe claramente o status de carga e a voltagem da bateria. Com um display digital LED, é fácil visualizar as informações de forma rápida e prática, permitindo que você acompanhe o progresso do carregamento sem complicações.
#### Aplicações Amplas
Este carregador é versátil e pode ser utilizado para carregar ou reparar todas as baterias de chumbo-ácido de 12 volts, incluindo AGM, GEL, SLA e Flooded. É ideal para uma ampla gama de veículos, como carros, caminhões, SUVs, motocicletas, cortadores de grama e embarcações marinhas.
### Instruções de Uso:
1. Conexão: Conecte os terminais do carregador aos terminais da bateria, respeitando a polaridade (positivo com positivo e negativo com negativo).
2. Seleção de Modo: Se necessário, selecione o modo de carregamento apropriado para o tipo de bateria que está sendo carregada.
3. Início do Carregamento: Ligue o carregador e observe o display digital para verificar o status da carga.
4. Monitoramento: Acompanhe o progresso no display. O carregador se desligará automaticamente quando a bateria estiver totalmente carregada.
5. Desconexão: Após o carregamento completo, desconecte o carregador da bateria.
### Características do Produto:
– Corrente de Carregamento: 10 Amp para baterias de 12V.
– Proteções: Curto-circuito, sobrecarga, sobrecorrente, sobretensão e inversão de polaridade.
– Tecnologia de Microprocessador: Detecção automática de voltagem e monitoramento do processo de carga.
– Display: LCD grande e LED digital para fácil visualização.
– Compatibilidade: Carregamento de baterias AGM, GEL, SLA e Flooded.
### Perguntas Frequentes (FAQ):
Pergunta: O carregador é compatível com baterias de diferentes tipos?
Resposta: Sim, o carregador é compatível com todas as baterias de chumbo-ácido de 12 volts, incluindo AGM, GEL, SLA e Flooded.
Pergunta: O que acontece se eu conectar a bateria com a polaridade invertida?
Resposta: O carregador possui proteção contra inversão de polaridade, evitando danos ao dispositivo e à bateria.
Pergunta: O carregador pode ser usado em ambientes externos?
Resposta: É recomendado usar o carregador em ambientes internos ou cobertos, longe da umidade e da exposição direta ao sol.
Pergunta: Como sei quando a bateria está totalmente carregada?
Resposta: O carregador possui um sistema de desligamento automático que indica quando a bateria está completamente carregada, além de mostrar o status no display digital.
Pergunta: Posso deixar o carregador conectado por longos períodos?
Resposta: Sim, o carregador foi projetado para manter a bateria em condições ideais sem sobrecarregá-la, podendo ser deixado conectado por longos períodos.
Jakob C. Froisland –
The media could not be loaded.
This is definitely an impressive little power supply … it’s a shame that it only lasted eight months. I was using it to maintain a battery in a project vehicle. I was able to start the vehicle a few times during the eight months till one day the vehicle wouldn’t start. Attached is a short video of the problem. I tested it on other batteries with the same results. Hey, I got what I paid for. I wish I could recommend another, but unless you find one with a good warranty, most will fail (sigh).
jimM –
This is an amazing lightweight and reliable trickle charger! This charger is not only easy to use, but it is also incredibly efficient at maintaining a car battery. I got this item for my mother who does not drive often and I typically have to recharge her car batteries whenever I visit. This avoids the problem entirely and it is lightweight enough for her to carry around and use. One of the standout features of this charger is its fully-automatic design. Once it’s connected, it takes care of everything else, perfect for my aging mother.
Quality: 5/5
Durability: 5/5
Value: 5/5
X-factor: 5/5 – lightweight and easy to use
Overall, I recommend this item to anyone in need of a reliable, lightweight, and efficient charger for their car battery.
Tron –
The media could not be loaded.
Overall, I like this charger. This charger does not have a ON/OFF switch. First you connect the clamps to the battery then plug the charger cord into the AC wall socket. That starts the charger. The labeling on the charger says it’s for 12 volt lead acid batteries so it’s limited in what it can charge.
The charger will not begin the charging stage if the automatic charging mode detects less than 1 Volt in the battery. In this case, you must use a manual charger (not supplied) for five or 10 minutes to get the voltage up high enough for the charger to start charging. So don’t throw away that old manual charger, you may need it. The charger has a fan and mine started as soon as I plugged in the charger to the wall socket. This charger puts out 10 amps which shortens the time to charge.
One nice feature of this charger is a display with messages moving across it (see video). Some of the display messages are:
Connect Clamps,
Warning Clamps Reversed,
Analyzing Battery,
Charging,
Fully Auto Maintaining,
Charge Aborted Bad Battery.
One message moving across the charger display was: “Charging 51%”. I think the charger was saying that my battery was at 51% capacity. If so, the 51% makes no sense to me. I had just driven to town earlier and the battery voltage, before the charger was attached, was 12.03 volts. Not a deal breaker.
🌼 Daba 🌼 –
This is a really nice looking charger. I was happy with it at first. Last time I hooked it up to top off a battery, something popped internally and smoke rolled out of it. It’s advertised to have a one year warranty which would be great if they supplied an address….phone#….or some sort of contact information! 4 months old and blew up the 5th time it was used.
higa –
Interesting thing about electric vehicles, they can’t jump a car battery! My son found this out when he needed to jump his van. So we realized we need another method to charge a gas vehicle’s battery.
This 10Amp charger can charge a regular 12-volt battery. It works great and has some added features that help protect your battery from being overcharged.
It also features a large LCD display that keeps you updated on the status of the charge.
higa –
I have a very old car (’97 Toyota anyone?) and like most old car owners, the batteries die about 2-3 times a year due to a number of reasons. So it seems, I am always having to go to the auto parts store to test the battery. No longer! My initial impression was I am very suprised how small this unit is. It is perfect for keeping in the car, I think, even in the trunk of my Toyota. The materials are a bit on the “inexpensive” end, although the casing is aluminum, and the clamps (while copper) are a bit on the thinner side. The clamp cord is a bit short, so in my car, the charger had to rest on the top of the car fender to charge. Also, the outlet cord is pretty short actually so either charge near the outlet or you have to use an extension, which the instructions say is not recommended. When charging the unit gets a little hot, especially since it says charging a 50% flat battery can take 3 hours, but there is a fan on the interior. One nice thing is the status lights, which did work correctly when I charged my lawn tractor battery. It did work charging the battery. So in summary, I think this is a good unit for occasional or emergency use, small enough to keep on hand or in the car. But if you’re looking for to do this often, or perhaps have more than one vehicle, you maight want to go for something more robust.