- 8 Pin Rocker Switch: Nilight 8Pin switch controls the strobe lights’ on, off, flash mode changing. Regulate the mode in press the switch to 6 modes(white/amber/white & amber/white strobe/amber strobe/ white & amber strobe). The light bar will remember the mode you last switching. And always keep sync and same lighting mode, you won’t be bothered by the out of sync light mode. Specially customize for any 6 modes amber and white strobe lights.
- Two Leads Available: 12FT extendable wiring harness, with two sets of light output connectors, the wiring harness can hook up two strobe light bars within 180W at the same time. The black wire is connected to the negative pole, the red wire is connected to the positive pole, and the yellow wire is used for lighting mode
- Circuit protection: Power relay for safety protection and conversion circuit. Blade fuse protects the circuit when over-current or short circuit occurs. Its load capacity is up to 180W and comes with two extra fuses.
- Application:The wiring harness kit is fit for 6 modes light bar that is within 180W. It is suitable for almost all 12V battery vehicles, such as jeeps, ATVs, UTVs, cars, motorcycles, ships, yachts, and trailers. If your power supply is 24V, please replace the original 12 V relay to 24V relay.
- Package includes: 1 x wiring harness kit, 3 x blade fuses, 6 x connectors,1x wiring diagram.


Frete Grátis em todo o BrasilProduto Original Importado dos EUA
Nilight 16AWG Strobe Light Wiring Harness Kit 2 Leads Customized for 6 Modes Amber White Strobe Lights LED Work 12V 40A On Off 8 Pin Switch Modes Changing Memory Reset Function
*$385.90
Informação adicional
Brand | Nilight |
---|---|
Material | Polyvinyl Chloride (PVC) |
Item dimensions L x W x H | 1 x 1 x 1 inches |
Cable Type | Custom Wiring Harness |
Connector Type | Crimp |
Manufacturer | Nilight |
UPC | 840323902083 |
Item Weight | 1.32 pounds |
Product Dimensions | 1 x 1 x 1 inches |
Country of Origin | China |
Item model number | 10054W |
Manufacturer Part Number | 10054W |
Date First Available | December 3, 2022 |
Saul Roberson –
As described
Israel –
Only 3 stars cause the power control for the amber lights didn’t work power button for the white light work fine I got it install already to so it’s to much to unplug everything out for just that
jaime g.g. –
No funciona correctamente el botón de modos. Hace el cambio de modo pero no se mantiene en color ámbar se regresa al color blanco, ese funciona correctamente pero no me funciona con ámbar ni destellos
Grate product so far +++++ –
Satisface With ítem +++++
Xavier –
Very good harness. It came with more than enough wire to route it where you want it to go.
The only issue is that the listing says it has the ability to save and hold the opposite color than the main white or whatever you use, that is untrue. The auxiliary button is a touch and go that will only activate it when you are holding it down. All they have to do is use a different type of relay but I understand the difficulty do to the price.
This is good for a starter setup when you don’t have any other lights ran and aren’t in desperate need for a secondary color
rob hoffman –
Perfect fit
Nikolas –
I purchased this product in order to control some aftermarket off-road lights which has DRLs. This meant that the lights had 3 wires, with a ground, and a positive lead for each set of lights (DRLs and Spot/Flood). I purchased this switch understanding it would allow me to toggle the DRLs, Spot/Flood, and DRL + Spot/Flood. This was not the case.
Pros:
– Sturdy construction, game with 6 crimp connectors to attach to leads on off-road lights.
– Long leads, should have allowed installation into the cab of the truck
– Switch lights up which helps during operation in the night.
Cons:
– Product did not work as advertised. The “Toggle” was not a toggle, but was a momentary switch. The product would turn on either the DRL or the Spot/Flood, depending on which light lead was connected to which switch lead, and then the other light would only stay on with the “toggle” kept down. So the toggle acted more as a momentary switch. If this is what you want, which seems unlikely as it requires a hand to come off your wheel, then I guess it’s for you.
– Taking apart the switch, it seems that the way the springs and rockers are inside are designed to be a momentary switch, definitely not a toggle. There was no way I could find to modify the switch to make it into a toggle.
Unfortunate, as there don’t seem to be many good options for 3 lead wiring harnesses. Was good value for the money, and was easy to install, but did not work as advertised. Will be requesting a return/refund due to improper item description.
Francis O. –
Had and issue with the control switch but being a great company they sent me out a new one. Works perfectly now….
J olsen –
Insane Quality for the price.