Frete Grátis em todos os produtos
### Descrição do Produto: AEM 14000 Air Filter Wrap, Preto (1-4000)
O AEM 14000 Air Filter Wrap é um acessório essencial para quem busca maximizar a performance do seu veículo, especialmente em condições adversas. Este envoltório para filtro de ar é projetado para proteger seu filtro de ar Dry Flow contra água e lama, garantindo que o desempenho do motor não seja comprometido por contaminantes externos. Com uma construção robusta, o AEM 1-4000 bloqueia pequenas partículas de sujeira, permitindo que apenas o ar limpo e filtrado entre no motor, o que é crucial para a eficiência e longevidade do sistema de admissão.
Uma das principais vantagens do AEM 14000 é que ele adiciona muito pouca restrição ao fluxo de ar. Isso significa que, mesmo com a proteção extra, o motor ainda pode respirar livremente, mantendo a potência e a resposta rápida que os motoristas esperam. O design de ajuste universal do produto permite que ele se encaixe em uma ampla variedade de filtros de ar, tornando-o uma escolha versátil para entusiastas de automóveis e profissionais.
### Instruções de Uso:
Para utilizar o AEM 14000 Air Filter Wrap, comece removendo o filtro de ar do seu veículo. Limpe a superfície do filtro para garantir uma boa aderência do envoltório. Em seguida, posicione o AEM 1-4000 sobre o filtro, certificando-se de que ele esteja bem ajustado e cobrindo toda a superfície. Utilize as presilhas ou fitas adesivas apropriadas para fixar o envoltório no lugar, evitando que ele se desloque durante a operação do veículo. Após a instalação, reinstale o filtro de ar no seu sistema de admissão e verifique se está tudo em ordem antes de ligar o motor.
### Características do Produto:
– Modelo: AEM 1-4000
– Material: Tecido sintético de alta resistência
– Cor: Preto
– Proteção: Bloqueia água, lama e partículas de sujeira
– Fluxo de Ar: Adiciona mínima restrição ao fluxo de ar
– Tipo de Ajuste: Ajuste Universal
– Dimensões: Compatível com a maioria dos filtros de ar Dry Flow
– Durabilidade: Resistente a condições climáticas adversas
### Perguntas Frequentes (FAQ):
Pergunta: O AEM 14000 é compatível com todos os filtros de ar?
Resposta: Sim, o AEM 14000 possui um design de ajuste universal, tornando-o compatível com a maioria dos filtros de ar Dry Flow disponíveis no mercado.
Pergunta: O uso do AEM 14000 afeta o desempenho do motor?
Resposta: Não, o AEM 14000 foi projetado para adicionar muito pouca restrição ao fluxo de ar, permitindo que o motor mantenha sua potência e eficiência.
Pergunta: Como posso limpar o AEM 14000?
Resposta: O envoltório pode ser limpo com água e sabão neutro. Evite produtos químicos agressivos que possam danificar o material.
Pergunta: O AEM 14000 protege contra água e lama?
Resposta: Sim, o AEM 14000 é projetado especificamente para proteger seu filtro de ar contra água e lama, prolongando sua vida útil e mantendo a eficiência do motor.
Pergunta: Qual é a durabilidade do AEM 14000?
Resposta: O AEM 14000 é feito de um material sintético de alta resistência, projetado para suportar condições climáticas adversas e uso intenso, garantindo uma longa durabilidade.
Dennis Taylor –
It’s a VERY snug fit to the AEM 21-205bf filter. I would rate it a 5 star but there is zero information or a fitment guide for aems filters. I had to gamble on this filter sock and hope it would fit.
Brody s. –
Some reviews saying doesn’t fit but fit it perfectly on a common size pod filter.
Brody s. –
bought it for my 97 toyota and works great. prefilter helps keep the main filter clean as well, id definately buy another one when needed.
Dennis Taylor –
If your engine sputters after precipitation, water may be getting through your intake air filter and into the MAF sensor. When this happens, the wire gets cold and causes the ECU to dump more fuel into the engine than is needed, flooding the engine. This issue can be confirmed by watching the O2 sensor indicating rich condition (10.0). I was skeptical that this filter sock would keep the water out, but when I opened the package, I realized the stock is treated with a water resistant coating. I’ve been driving my car through rain and snow storms (which I had been unable to even drive it a day after a good rain), and have not had any repeats of the problem since having the filter sock installed. This part number filter sock fits the AEM 21-203DK filter perfectly. I am very pleased that this sock corrected a problem that had caused me to drive a rainy-day car rather than my fun and modified car.
Nine Five Garage –
You open the package and it’s just a tiny, thin piece of fabric. Probably the most expensive piece of fabric I’ve ever bought. Yet it should last a long time and honestly I see it as a worthwhile investment. Perhaps the cost is just to cover the cost of research & development on this, since it’s hard to believe this thing actually costs close to that much to manufacture.
Anyway, cost aside, I am happy with this purchase. I wanted to make sure I could actually have confidence in this product’s performance, so I put it under my kitchen faucet for a few seconds. All the water runs straight off, just like those fancy dress pants you can buy.
The reason I bought this in the first place was that driving in Utah rain/snow used to make my car struggle a little bit at low RPMs. After putting this on my filter that is no longer an issue; drives the exact same in snow as it does in dry weather. So again, very happy. It was a little bit tricky to put on since it is super tight fitting onto AEM’s standard filter, so it was like trying to stretch a fitted queen bedsheet over a king size mattress. But I got it on and everything’s working great.
P. R. –
While the Dry Flow Filter Wrap is not designed to prevent hydrolock (the intake is submerged and draws water into the throttle body), it does a fantastic job of repelling droplets of water from the surface of the filter. I modified my car’s bumper to allow air to directly flow onto the filter, but of course the downside is water can splash onto the filter itself. While this doesn’t cause much concern for hydrolock, what it does do is expose the filter to getting wet, which severely effects intake function. Furthermore, water damage (rust,mold,etc) on the surface of the filter will lead to the need to replace the rather pricey filter. This Dry Flow wrap is a highly hydrophobic and perfectly-fit tool to prevent water from permeating the surface of your air filter. I cannot recommend this part enough!
Shawn Carlson –
El producto trae calidad pero queda justo al filtro Aem
Billyjoe –
Fits on the filter nicely and does what’s it supposed to do. Highly recommend for those who have fender well Cold air intakes .
Odalis –
Installed the aem v2 intake on my 00 integra gsr. Added this filter sock with it to help protect the filter from sucking up any water. Fits great. Shouldn’t affect air flow at all. High quality and looks nice. Easy to install. Highly recommend.
Odalis –
I bought this to try for my race filter but it is a bit on the small size to go around the whole filter cone. The elastic is not very strong either and I’m a bit worried it might come off while driving. Tried it on my spare aem non-race filter and it fit around the whole cone but like I say the elastic was not strong enough to my liking.
So is it worth it to help prevent dust and possibly water from splashing on the filter or being sucked in to engine? I’ll say no, I would spend the $40+ on something else.