Frete Grátis em todos os produtos
### Descrição do Produto
O WixGear Dashboard Mount é um suporte magnético universal para smartphones e tablets, projetado para proporcionar uma experiência de condução segura e prática. Com um sistema de montagem fácil, este suporte é ideal para quem busca conveniência e eficiência ao utilizar dispositivos móveis no carro.
- Sistema de Montagem Mais Fácil: O suporte magnético WixGear é fabricado com ímãs fortes, capazes de segurar a maioria dos smartphones de forma segura, garantindo que seu dispositivo permaneça no lugar durante toda a viagem.
- Rápido e Sem Complicações: Basta posicionar seu telefone próximo ao suporte, e o ímã forte irá prendê-lo instantaneamente, sem que você precise desviar a atenção da estrada.
- Instalação Simples: O suporte pode ser facilmente fixado no para-brisa ou no painel do carro. Coloque o ímã entre seu telefone e a capa, e você estará pronto para ir.
- Forte e Confiável: Fabricado com materiais duráveis, este ímã garante que seu telefone permaneça firmemente no lugar, mesmo durante o uso com uma mão ou em estradas irregulares.
- Design Inovador: Apresenta tecnologia reversível para suporte extra, além de funções ajustáveis e rotativas que permitem fácil acesso ao seu telefone.
### Instruções de Uso:
Para utilizar o WixGear Dashboard Mount, siga os passos abaixo:
1. Instalação do Suporte: Escolha uma superfície limpa e plana no seu painel ou para-brisa. Remova a película protetora do adesivo do suporte e pressione firmemente para garantir uma fixação segura.
2. Preparação do Telefone: Insira o ímã fornecido entre o seu telefone e a capa. Caso não utilize capa, cole o ímã diretamente na parte traseira do dispositivo.
3. Montagem do Telefone: Aproximar o telefone do suporte. O ímã irá atrair e prender o dispositivo automaticamente.
4. Ajuste do Suporte: Utilize a articulação ajustável para posicionar o telefone na melhor angulação para visualização e acesso.
### Características do Produto
– Compatibilidade: Suporta a maioria dos smartphones e tablets disponíveis no mercado.
– Material: Construído com plástico de alta qualidade e ímãs de neodímio, garantindo durabilidade e resistência.
– Dimensões: Compacto e leve, facilitando o transporte e a instalação em diferentes veículos.
– Rotação 360°: Permite que você ajuste o ângulo do seu dispositivo para uma visualização ideal, seja na vertical ou horizontal.
– Reversibilidade: A tecnologia reversível oferece suporte adicional, aumentando a segurança do seu dispositivo.
### Perguntas Frequentes (FAQ)
Pergunta: O suporte WixGear é compatível com todos os modelos de smartphones?
Resposta: Sim, o suporte é projetado para ser universal e é compatível com a maioria dos smartphones e tablets disponíveis no mercado.
Pergunta: O ímã pode danificar meu telefone?
Resposta: Não, o ímã é seguro e não causará danos ao seu dispositivo. No entanto, recomenda-se evitar o uso em dispositivos que possuem componentes sensíveis a ímãs, como alguns cartões magnéticos.
Pergunta: Posso usar o suporte em estradas irregulares?
Resposta: Sim, o suporte WixGear é projetado para manter seu dispositivo seguro mesmo em estradas irregulares, graças à sua construção robusta e ímãs fortes.
Pergunta: É fácil remover o suporte do painel ou para-brisa?
Resposta: Sim, o suporte pode ser removido facilmente sem deixar resíduos, mas recomenda-se seguir as instruções de remoção para evitar danos à superfície.
Pergunta: O suporte é ajustável?
Resposta: Sim, o suporte possui um braço ajustável e rotativo, permitindo que você posicione seu dispositivo na melhor angulação para visualização e acesso.
Russell W –
This is a product of exceptional quality, design, and value. The suction cup is pliable and of the sticky, removable and non-marking silicone, and once you flip the locking lever, it is super tight! The magnetic grip is equally strong, and my phone has not even slipped as I go over the endlessly affable potholes of Toronto!
Amazon Customer –
Perfect! Exactly what I needed. The magnet on my phone case didn’t work very well, but it did come with a few magnets to stick on. Stays on the window nice and tight.
jason rowland –
Facil de colocar.el iman aguanta muy bien una tablet
Kevin Jata –
My story:
I finally got this to work…with a little extra effort. First, the magnetic hold is awesome. I put the supplied metal plate on the back of my 8″ Samsung tablet, which btw way weights close to a pound (15.94 oz). And the sucker snapped in solid. Then I tested the suction cup with tablet mounted, by attaching it to a window in my house. It held for 24 hrs, no problem. But I was worried about the dash of my car. It has a pebbly texture and a slight curve. So I stuck it on, and it held for a few hours. I left it overnight, and it popped off. So I did some looking and found a mounting plate just for this purpose (see photo) and put that on. It pulled loose after 12 hrs (I had let it “set” for 48 hours).
Well I had a nice round mounting pad, so I concentrated on trying to fix it better to the dash. Research led me to the “Plastic Bonder”, which had impressive reviews It mixes like any two-part epoxy. Applied it to the back of the pad, after I removed the adhesive coated wafer. I let it cure for 24 hrs and it seemed rock solid. Oh btw, I cleaned the vinyl with denatured alcohol at the very start of this project. So at this point its held on for about 36 hours with no problem. I might mention that there’s another product that might work even better called Plastic Weld. It specifically mentions that it bonds to vinyl (which the Bonder didn’t say). And the holding strength is higher. But the Bonder worked fine.
So far so good. I wanted to stabilize this medium sized tablet so I could have a handy GPS screen at my finger tips. It also works great for fast forwarding through sections of podcasts. Good luck gadget enthusiasts!
Victor –
So much better than my previous holder, i have a cover on my phone and the metal disk stuck on the inside of the cover nicely, the grip is great, and although there is a slight vibration, its not enough to affect the ability to see the screen. I did wonder if the phone would slide around, but it has never moved at all, definitely worth the money.
Kevin Jata –
I have had the spring-loaded phone holders, the flexi holders and the adjustable grip holders. All of these have felt cheaply made and usually broken or would have to be positioned awkwardly due to the charging cables. I have one in my car and on my 2nd phone using the magnetic system. My wife also has one for her car. These guys are super sturdy, leave your phone in clear view while not being blocked to connect any kind of cables to your phone from top, bottom, or side.
They are also extremely convenient to flip phone sideways for gps, or just standard to get phone calls while driving. The ONLY issues with these, is that because they are magnetic, you need to have a thicker case or thicker jelly-case. Don’t attach them directly to your phone either.
The magnetic interference will kill the display on your phone. If you are putting these on a case, match up where it will sit on your phone and see if the screen blacks out before attaching the metal plate. If you do that, this is a highly superior product. If you are connecting metal plate for magnet directly to your phone, you are going to have problems.
Somebody Like You –
I’d been needing a magnetic car-mount for my phone, and after researching, found this one. It got great reviews and seemed to be rock solid– but I still had concerns over the “suction cup experience”. I was concerned that it would not stick to the (somewhat textured) surface of my dash, and I’d have to resort to a slightly-awkward window mount.
First I tried the window mount, to plan my retreat position. Of course, it stuck well, and left me with a pretty reasonable setup– and because of the downward angle of the long arm from the windshield, I learned how to use the “platform lock” (the tightening ring around the magnetic mount) to secure the phone at the correct angle. So far so good.
Next I figured I’d try the dashboard mount– it was a bit tricky to find a spot flat and close enough, but once I picked my spot, it was locked on the first attempt. Once I tightened everything down, I had a rock solid setup. WOW.
The biggest test, I figured, would be when the car heated up and the suction cup would be tested– and to my surprise, there was NO TEST. The thing didn’t even appear to have noticed the change in temperature– it was still locked solidly on my dash.
I have had to re-tighten the mount point lock a couple times (it’s doing a great job given all the motion and force it endures) but I’d expect that to be the norm from this type of device. So far, the mount has been in my car for over a week– no loss of suction, no loss of phone….. ALL GOOD.
Kam –
Ho regalato il prodotto al mio ragazzo il quale lo utilizza per il pullman su cui lavora ed è pienamente soddisfatto!
Amazon Customer –
Awesome mount.
The base is thick, slightly squishy and has a light glue around it. The seal it creates is very secure. It will not mount onto the surface of my dash, which has a small pattern, but will on a flat surface, even if it is not glass. It also will not fall off in as little time as a harder plastic base would (the ones you have to lick (if you’re like me and lick your mounts to add a seal)). It is more of a pain to take off once mounted, but that’s not a bad thing. I was a little concerned at first the glue would get contaminated because I was mounting, pulling off and moving it many times to find the perfect spot. It did not and has maintained a great hold, even with the force of my plus sized phone being on it while I drive.
The Arm is perfect. I would highly recommend this over a shapeable arm, because those are weaker. This holds the phone exactly where I want it all the time.
The only issue I have had is the magnet plate loosened, which someone has added a video of in their review below. It was a slight nuisance because it rattles but if you run into this it is an easy fix. Just unscrew the magnet plate from the mount arm until the threads are completely exposed and pull the plate off the ball joint. On the back of it, inside the threads, is a little rubber cup. Simply pop the cup out with a screw driver and there is a phillips head screw. Tighten that and put it back together. Not a big deal at all, so I didn’t take off a star for it.
Pedro –
Me gustó. Tiene mucha fuerza 👍🏻