Frete Grátis em todos os produtos
### Descrição do Produto
O X AUTOHAUX Universal Car Remote Central Kit Door Lock Keyless Entry System é a solução ideal para quem busca praticidade e segurança em seu veículo. Este sistema de entrada sem chave, projetado para funcionar exclusivamente com veículos de 12V, oferece uma experiência de uso inovadora e eficiente. Com um design compacto e funcional, o kit é equipado com um sistema de entrada sem chave de 2 botões, permitindo que você trave e destrave seu carro com um simples toque no botão.
Com a capacidade de trancar remotamente seu carro, você pode garantir a segurança do seu veículo sem a necessidade de chaves físicas. Além disso, o sistema inclui uma função de liberação remota do porta-malas, facilitando o acesso ao compartimento de bagagens, especialmente em situações em que suas mãos estão ocupadas. Embora não possua saída para janelas, o sistema é altamente eficiente e atende às necessidades básicas de segurança e conveniência.
O X AUTOHAUX também se destaca pela sua capacidade de aprendizado de códigos de controles remotos, permitindo que você adicione controles adicionais conforme necessário. Isso significa que, se você perder um controle remoto, pode facilmente programar um novo, garantindo que você nunca fique sem acesso ao seu veículo.
[NOTA]: Este sistema é adequado para todos os tipos de veículos de 12V, mas não é compatível com veículos de 24V, portanto, é essencial verificar a voltagem do seu carro antes da instalação.
### Instruções de Uso:
Para utilizar o X AUTOHAUX Universal Car Remote Central Kit, siga os passos abaixo:
1. Instalação: Conecte os fios do kit de acordo com o manual de instalação fornecido. Certifique-se de que a fonte de alimentação de 12V esteja corretamente conectada.
2. Programação do Controle Remoto: Para programar o controle remoto, siga as instruções de aprendizado de código. Geralmente, isso envolve pressionar um botão no módulo do sistema enquanto pressiona o botão do controle remoto que deseja programar.
3. Uso Diário: Após a instalação e programação, você pode usar os botões do controle remoto para trancar e destrancar as portas do veículo. Para liberar o porta-malas, pressione o botão designado.
4. Manutenção: Verifique periodicamente as conexões e a bateria do controle remoto para garantir o funcionamento adequado.
### Características do Produto
– Sistema de Entrada Sem Chave de 2 Botões: Permite fácil acesso ao veículo.
– Trancamento Remoto: Proporciona segurança adicional ao seu carro.
– Liberação Remota do Porta-Malas: Acesso rápido e prático ao compartimento de bagagens.
– Aprendizado de Códigos: Possibilidade de adicionar novos controles remotos conforme necessário.
– Compatibilidade: Projetado exclusivamente para veículos de 12V, garantindo um desempenho otimizado.
### Perguntas Frequentes (FAQ)
Pergunta: O sistema é compatível com todos os veículos?
Resposta: Não, o X AUTOHAUX é compatível apenas com veículos de 12V. Verifique a voltagem do seu carro antes da compra.
Pergunta: Como posso programar um novo controle remoto?
Resposta: Para programar um novo controle remoto, siga as instruções de aprendizado de código no manual do produto. Geralmente, envolve pressionar um botão no módulo enquanto pressiona o botão do controle remoto.
Pergunta: O sistema pode ser instalado por conta própria?
Resposta: Sim, a instalação pode ser feita por conta própria, mas é recomendável seguir o manual de instalação cuidadosamente. Se você não se sentir confortável, consulte um profissional.
Pergunta: O que fazer se o controle remoto não funcionar?
Resposta: Verifique a bateria do controle remoto e as conexões do sistema. Se o problema persistir, consulte o manual para possíveis soluções ou entre em contato com o suporte técnico.
Pergunta: O sistema é resistente a intempéries?
Resposta: O X AUTOHAUX é projetado para uso interno no veículo. Evite expor o módulo e os controles a condições climáticas adversas para garantir a durabilidade.
Veera Babu –
Excellent
Gina Ray –
Fantastic for the money. Installed on my 86 monte so I didn’t have to use the key Everytime I went in a store. I will replace it for remote start setup when I do the built engine and vintage air but as my daily it’s a pain to have to use the key when you just need to run in a store or something real quick so I wanted something that would simply just lock and unlock doors. 5 star for cheap and works fantastic -5 stars for terrible instructions you really klneed to understand electrical pretty well as it’s designed to work with many different lock setups. Positive trigger setups like mine negative trigger setups and more. It’s vital to wire it correctly for your system or it could damage the system especially on newer junk with overly complex locking systems. Long story short for 17 bucks I have keyless entry and it was quick to install when I finally figured out what schematic to use. It will unlock and unlock my car from my living room through the house 150ft across the yard through my 30×50 metal insulated building while it’s closed up. I’d call that a definite win for 17 bucks
Eric Kelly –
Ok, so I replace an old remote door locking kit in my 2006 Mercury Grand Marquis. This is not the best way of hooking it up, but it works for what I wanted the kit to do. The kit is installed in the driver side door panel under the window/door lock panel. I hooked up the BLACK ground wire to the door panel into the metal door. I then found the constant hot wire to the door locks and combined that wire with the WHITE and WHITE/BLACK STRIPE wire. I then put the YELLOW wire to the wire under the lock/unlock switch that locked the door. Next, I put the YELLOW/BLACK STRIPE wire to the unlock signal wire in the switch. That was it! I did not use the other wires and just capped then off. The only other one I might use is the forked brown wire that sends 1 or 2 jolts of 12 volt to lights, horn, ect. I am just happy to get the kit to work! Great signal strength over 150 feet and nice feeling remotes.
Pranjal sharma –
This product is not install in my car
jony112233 –
Works very well if all you want is unlock and lock. Very simple install if you need a + or – trigger the yellow and yellow black are before the relay and the white and white black are after the relay. My application was – triggered so both yellows to ground . The whites to the door module. I didn’t hook up the other nonsense like windows and horn
John –
I purchased this device for a 2021 Toyota Tacoma SR with the utility delete package. For the price I am very pleased (dealer wanted $500 to install an aftermarket unit that only does basic lock and unlock). The instructions included where more than sufficient for me to be able to install in less than an hour. On a side note the directions and diagrams only show the wires on the unit. You will have to figure out the wires you need to tie into on your vehicle. For the 2021 Tacoma you will find some small 24 ga wire in a connector under the kick panel on the drivers side. The lock wire is red and the unlock wire is yellow. You will tie the 2 yellow and yellow/black wires (common) on the unit with the ground you run to power the unit. It’s that easy. I have not connected to the horn or lights at this point but will update if I do. The key fob feels solid and of good quality. I tested the range from inside my office to where my truck was parked outside and it worked through several walls and at least 30 yards away.
Mark L. –
I wanted to like this. I have a slightly older car that has power locks and IR keyless entry already installed. I wanted something that I could map to the existing wiring harness. Easy peasy? Nope. Hours lost. Hours wasted. This has THE MOST indecipherable bullshit diagram ever passed off as “instructions” — and nobody has used it so there’s no online help to be found. There’s no real company, as the box doesn’t even use the name “autohaux” — that’s some kind of repackaging and reselling at work. I isolated the wires. I literally can hotwire them in my car to tap the “open” to power, the locks open. Tap “close” to the power, the locks close. I only need 4 wires. There’s no way to wire this into this device.
The device has 4 different ways to wire it up which makes no sense. I’m not an idiot. I can and have done a lot with electronics. I’ve installed several stereo systems, speakers, all without easy to use harnesses. I can figure out the Jeep color wires and what they need to do, but it’s impossible to match that to which wires this device needs. Mapped the power and ground and what should have been the right wires, and it just clicked. The box clicked and did nothing. It clicked twice and did nothing to unlock. I reviewed the wording and decided that possibly the bad wording on the tiny diagrams means I should have been using graph B instead of A… So I tried that. Aaaand it blew a fuse in my dash.
Four hours lost, wasted, and turns out I have no spare fuses, so I can’t lock my car, adjust my mirrors, or have radio on my daily driver until the fuses I ordered on amazon show up.
Avoid this terrible product. You wire it right, it does nothing. You wire it right (B) and it’ll fry your car.
Sad thing is I liked the design of these fobs. I want a simple, thin, 2-button fob, and this had what I wanted. I really tried to make it work.
EDIT: The score stays at the minimum, and this doesn’t change WHY I rated it so low, but for those trying to fight this:
I did manage to get this working. After 2 more fuses blown. It has 3 color wires, each with that color and then that-color-with-a-black-stripe. Very common in car wiring harnesses to find a positive orange, and a negative or grounded partner of that same circuit as orange “with some kind of stripe” and when you touch both together, you have connected the circuit. So, you would think, hypothetically, when you have a white, and a black-and-white, they would be a pair, right? You would think that having a yellow, and a yellow-and-black would be a pair, right? NO! WRONG!
There are 3 signals/inputs. Orange, white, and yellow. There are then three repeats of each of these with a black stripe, so or/bl, wh/bl, yl/bl. In this one we focus on white. White does NOT connect to wh/bl to connect the circuit. White is a closing signal, and white black is the OPENING signal. Yellow is the ground! So full white grounds to full yellow. Then, wh/bl grounds to yl/bl. That’s the UNLOCK circuit. This defies most conventional circuit design and conventions. This is why this is so hard to decipher.
The device has an internal switch that will momentarily connect the solid white to the solid yellow, and the wh/bl to the yl/bl when you push the other inputs. That’s what it’s doing under the hood.
My Cherokee XJ has an older circuit whereby if I put +12 into the wire for the lock, it will lock. If I move that +12v to the unlock, it will unlock. Pretty straight-forward. Your car might work by touching +12 to something, OR (and do your research) it might be designed to touch a ground to a live wire instead of a positive. It’s a minor distinction, just make sure you got the right wires spliced to this unit’s harness.
I put it to you all trying to wire this up: You need a +12 and a GND to run the module. It will piggy back off your battery so you can unlock when the car is off. Then you need to find your car’s wiring harness wires that will trigger lock and unlock. These are the red and black wires.
NEXT (1995 XJ): My yellow AND my yellow/black got 3-way spliced into the ground. I used crimp connectors with heatshrink around them.
LASTLY (1995 XJ): White on this unit’s harness spliced to “lock” wire on jeep. White/black spliced to “unlock” wire on jeep.
I couldn’t find the lights on my jeep’s RKE harness so I didn’t wire them in, but the last option would be to connect thost at the end so your lights blink as desired.
I hope this helps some other poor sould with a Jeep trying to wire one of these clone boxes in.
Azhakath Ravindranathan –
Very bad product.
Does not work at all
Could not test in tim and so I lost my money.