Frete Grátis em todos os produtos
- Cleans wire and reduce burn back 50 percent
- Pre-treated with lube matic liquid
- Lubrication allows smooth feeding of wires with poor cast, helix, rust and long feed liners
Microfiber Towels for Cars (Pack of 6) - Wash Rags with High GSM, Highly Absorbent, Soft & Lint-Free - Cleaning Rags Cloths for Car Wash Detailing Drying & Home Cleaning Supplies
*$341.30
Premium Shammy Towel for Car, Super Absorbent 26""x17"" Large Car Drying Towel, Reusable Soft Car Wash Cloth, Chamois Cloth for Car, Dust Remove, No Scratch/Spot/Streak, Yellow
*$241.00
Frete Grátis em todo o BrasilProduto Original Importado dos EUA
Weld-Aid 007062 Lube-Matic Combo-Paks, One Red Wire Pad/One Black Lube Pad
*$328.00
Informação adicional
| Material | Polytetrafluoroethylene |
|---|---|
| Brand | Weld-Aid |
| Package Information | Pouch |
| Recommended Uses For Product | Industrial, Mechanical |
| Flash Point | 149 Degrees Celsius |
Ron Rhodes –
Put these on and soon after I couldn’t figure out why I was getting a lot of splatter. Took them off, fed and cut off about 15″ of wire splatter greatly reduced. Soon splatter almost totally gone. Wiper (gray) pad might be great but not with the “lube” smeared all over it.
Up date. Found that gas hose was leaking. Fixed the leak and no problems
E-Fee –
I’ve ordered about 3 so far they are amazing and haven’t had an issue since. Not counting me kinking the liner
Amazon Customer –
This was my first time using these, but im a believer now. The wire feed in my mig is much smoother than before. Good product
ojait2 –
My old Lincoln 155 Weld-Pak had trouble dispensing wire. With out fail as soon as I cleared the last one a new “birds nest” would occur after only a few minutes of welding! It became so frustrating considered getting a new welder! I stumbled upon the ‘Lube-Matic Combo-Paks’ by luck. The (2) foam cylindrical pads attach around the Mig wire inbetween the spool and the cable feeder and stay in place by a metal clip. The red one goes before the black one. The red pad is a bit coarser and removes grit or rust. The black one is for coating the cleaned wire with a welding wire lubricant which is purchased separately. This is what saved me the cost of a new welder! The freshly cleaned and lubed wire is now easily fed through my Mig’s .35 inch liner. I’ve been using the pads for almost 3 weeks and haven’t had any problems with the wire being fed and I’ve been using it a few hours a day every day! If you have welding wire feed problems and don’t like having to clear knotted coils from your feeder try these pads and purchase the lubricant for the black pad. It doesn’t contaminate the integrity of the weld, but it really works. Here is the link for the lube I bought ;Weld-Aid – Lube-Matic® Liquid Wa Lube-Matic 5 Oz007040 – Sold as 1 Each
Peg leg –
Both came dried up and cracked
K. Jolley –
they do clean the wire, and for me, it is just peace of mind. this is the second set I purchased.
D! Schrader –
Just tried these…. stopped all the bird nesting i was getting from some rusty wire!
EdCaffreyMS –
If you own a MIG welder, these little lube pads will save you a lot of heartache and prevent a lot of stoppages on your machine(s). I’ve been making them myself for years…. generally making out of a plug of felt soaked in WD-40. As I get older, I find myself willing to pay for SOME of the things I used to make for myself….and this is one of them. 🙂
I’ve not had any of these dry out yet….but if they every do, a quick spray of WD-40 every now and then… and you’re good to go!