Frete Grátis em todos os produtos
### Descrição do Produto
O Chemical Guys ACC_326 – TORQ Foam Blaster 6 Foam Wash Gun é a solução definitiva para quem busca uma lavagem de carro eficiente e divertida. Este inovador lavador de espuma conecta-se facilmente a qualquer mangueira de jardim padrão, eliminando a necessidade de ferramentas ou máquinas adicionais. Com o TORQ Foam Blaster 6, a limpeza do seu veículo se transforma em uma experiência de banho de espuma, proporcionando um brilho inigualável e uma limpeza profunda.
A espuma de lavagem de carro é um segredo profissional que garante um acabamento livre de arranhões. O TORQ Foam Blaster 6 transforma sua lavagem em um verdadeiro spa para o seu carro, removendo suavemente sujeira e contaminantes sem arranhar a pintura. Isso assegura um acabamento impecável e sem danos, preservando a beleza do seu veículo.
Um dos maiores problemas na lavagem de carros é a formação de arranhões e marcas. Com mais de 95% dos arranhões resultantes de técnicas inadequadas de lavagem, o TORQ Foam Blaster 6 se destaca ao aplicar uma espuma escorregadia que minimiza esses riscos. Assim, você pode limpar seu carro de forma segura, mantendo a pintura protegida e impecável.
A versatilidade do TORQ Foam Blaster 6 é outro ponto forte. Com um simples giro no botão, você pode ajustar a concentração da espuma de acordo com o nível de sujeira do seu carro. Seja uma leve sujeira ou uma camada pesada de lama, o controle de diluição permite economizar sabão e água, enquanto garante uma cobertura ideal de espuma para uma limpeza eficaz.
Procurando o presente perfeito para os amantes de carros? O TORQ Foam Blaster 6 é uma escolha excepcional! Ideal para datas comemorativas como Natal, aniversários ou qualquer ocasião especial, este presente certamente encantará os entusiastas de automóveis com seu poder de lavagem em espuma e simplicidade de uso.
### Instruções de Uso:
1. Conecte o TORQ Foam Blaster 6 à sua mangueira de jardim.
2. Ajuste a concentração da espuma girando o botão de diluição, conforme necessário.
3. Encha o reservatório com o detergente de lavagem de carro apropriado.
4. Abra a torneira e pressione o gatilho para liberar a espuma sobre o veículo.
5. Deixe a espuma agir por alguns minutos para soltar a sujeira.
6. Enxágue o carro com água limpa para remover a espuma e a sujeira.
### Características do Produto
– Conexão Universal: Compatível com qualquer mangueira de jardim padrão.
– Ajuste de Concentração: Controle de diluição para personalizar a espessura da espuma.
– Design Ergonômico: Confortável e fácil de manusear, ideal para longas sessões de lavagem.
– Reservatório Grande: Capacidade suficiente para uma lavagem completa sem necessidade de reabastecimento frequente.
– Material Durável: Construído com materiais de alta qualidade que garantem longa durabilidade.
### Perguntas Frequentes (FAQ)
Pergunta: O TORQ Foam Blaster 6 é compatível com qualquer tipo de detergente?
Resposta: Sim, o TORQ Foam Blaster 6 é projetado para funcionar com a maioria dos detergentes de lavagem de carro disponíveis no mercado.
Pergunta: Posso usar o TORQ Foam Blaster 6 em veículos com revestimentos especiais?
Resposta: Sim, o TORQ Foam Blaster 6 é seguro para uso em veículos com revestimentos especiais, desde que você utilize um detergente apropriado.
Pergunta: A espuma gerada é suficiente para uma lavagem completa?
Resposta: Sim, a espuma gerada pelo TORQ Foam Blaster 6 é projetada para cobrir toda a superfície do veículo, proporcionando uma limpeza eficaz.
Pergunta: É fácil de armazenar?
Resposta: Sim, o design compacto do TORQ Foam Blaster 6 facilita o armazenamento em qualquer lugar, seja na garagem ou no porta-malas do carro.
Pergunta: O produto vem com garantia?
Resposta: Sim, o TORQ Foam Blaster 6 vem com garantia do fabricante, garantindo sua qualidade e durabilidade.
Amazon Customer –
Received mine and was pleasantly surprised that it does provide a decent foam from a mains pressure hose.
Addison Reynolds –
I recently bought the Chemical Guys TORQ Foam Blaster 6 and I am beyond impressed with its performance! This foam gun connects easily to any standard garden hose, and it produces thick, rich foam that covers the entire car. The foam clings to the surface, lifting dirt and grime, making it incredibly easy to rinse off.
The build quality is excellent, with sturdy materials that feel like they’ll last for a long time. I love that I can adjust the foam output with the dial, allowing me to control how much foam I want to apply depending on the task at hand. Whether I’m washing a regular vehicle or a more delicate surface, I can customize the foam to suit the job.
Steve207 –
In all fairness of this review I’ve only used twice now. However, the biggest issue was that after 1 use it leaked/ sprayed like crazy out of the brass quick connect feature that connects the hose nozzle to the soap dispenser.
I emailed chemical guys explaining the issue….no response. I called chemical guys and got someone on the phone who seemed oblivious to the issue, which is odd considering all the complaints on here regarding the same leaking issue. Anyways, she asked me to email videos of the leak so they could pinpoint the issue. I did and over a week has passed with no response.
After researching, I found out there was supposed to be an O-ring inside the hose nozzle. It beds in a little groove in there and seals up the connection. Problem is, when it’s disconnected & youre using the hose nozzle to rinse, it’s apparently fairly easy to blow out that o-ring, causing leaking. So why a $50 foam gun doesn’t come with some back up o-rings that cost pennies or at least a description of what size o-ring you need is beyond me. Why chemical guys, a company of which I’ve used their products religiously for years now, can’t seem to easily respond to the issue is also beyond me.
Anyways, after trying a number of o-rings out I found out the one that works. You’ll need o-ring size 3/4″ ID, 7/8″ OD, 1/16″ Width. I purchased these ones on amazon; got a 100 pack so that should last a while. https://www.amazon.com/gp/product/B000FMWM5E/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Besides that, gun has worked fine for me so far. The key is to add a few ounces of soap to the container & then top it off with warm water. This is what their how to videos say. By doing this, the soap is plenty foamy & is more than enough for a car wash. I suspect those complaining about limited foam or the soap being used up to quickly are not adding the water (or are using cheap soap or have the dial set too low).
Hope this helps.
Kindle Customer –
Per the title I have saved a ton in soap, because before I was a two bucket washer. One for soap, one to rinse and clean the mitt. I have an F150 and a Camry and even with a dirty F150 one canister was all I used. About 3 oz of soap. Before the foam cannon I easily used double that amount using the ol bucket mitt and mitt rinse bucket method. This cannon wastes zero soap and uses half the amount as mentioned before. The detachable nozzle gives you a great spray pattern for rinsing too.
The clear canister seems flimsy, so take care not to drop it on concrete. The rest of it seems hardy enough. I would also add that the foam, combined with filling the canister with warm water saves a lot of time in washing. The warm foam quickly lifts dirt so I can be slightly more careless with a mitt and the entire vehicle is clean. No more missed spots which is cool. That’s with using a quality soap, and I only use chemical guys car care liquids. Except for the turtle wax “wax as you dry” stuff. That’s a great product as well.
Considering the amount of times I wash my vehicles, if it lasts two years I will be happy. I would absolutely buy another one. I wash them both at least twice a month because of the lousy trees in my yard and the birds in them crapping out stuff onto them.
Nehemias –
The media could not be loaded.
Llegó antes de lo esperado, los materiales se ven de buena calidad, en el video estoy utilizando la pistola en el modo #5 el cual permite la mayor espuma posible, también estoy utilizando el shampoo “chemical guys”.
El líquido no dura mucho dentro del recipiente, se acaba muy rápido, pero si lo recomiendo !!!
diydan –
I just got the ceramic coating applied to my new truck and wanted something that would apply soap evenly and without too much waste. Set up on this is easy, just connect the adjustable spray nozzle to the garden hose, then use the snap fitting to connect that to the bottle and sprayer. Mostly fill the bottle with water and add your soap (note, it works better with soaps designed to foam). Then you can adjust the sprayer to foam the amount you want. You get a tight coverage that allows you to save on soap. Wash with a mitt or sponge then disconnect the bottle/sprayer and use the nozzle to rinse off.
Construction is solid with a brass snap fit that connects the nozzle to the sprayer bottle. Sturdy polycarbonate bottle and plastic sprayer are well made. Pretty happy with it so far
RYAN G –
This foam blaster is fantastic! I should have bought one of these years ago…honestly. It foams up nicely and I can cover my whole truck in less than 1 minute with foamy bubbles and soap. Let it soak for a few minutes and then I’ll spray it again and then wipe it all by hand using a soap mitt. This works great and saves me a lot of $ at the car washes. I wash my truck every week ( or 2 weeks tops ) so this tool is a must have for anyone who loves their vehicle and that washes it all the time. This would make a great gift for the guy or girl in your life that loves to wash their car 🙂
This really makes washing your vehicle a whole lot easier! And it’s much quicker than filling buckets up to get soap, over and over. It also does a better job to wash the paint and rims etc as you can leave it to sit and soak in. Highly recommended!
John Smith –
The foam gun is very well made. The quick disconnect is nice to have since you can switch from soaping the car to rinsing without any extra steps.
The foam gun didn’t lather my car like you see on the YouTube videos. But they have pressure washers. Before I bought this I knew it wouldn’t do the same lathering as a pressure washer to be honest. But it didn’t apply evenly and tended to run off. I used Chemical Guys wash and measured the amount used.
Going forward, I will wash in sections rather than lathering the whole car and then hand washing.
Bottom line, we’ll made, reasonably priced, easy to use. But you have to be realistic that a household water supply just can’t do the same things as a pressure washer. On the plus side, the kids can use the foam gun well before you would trust them to safely use a pressure washer.
Marshal Junior –
Easy to use and produces the right amount of form as required.
Mike Homsy –
It’s okay for a cheap option. I used it as instructed with Chemical Guys products, but the foam isn’t as thick as you’d expect. The plastic feels a bit flimsy too—not the sturdiest tool out there.
That said, it works for washing your car if you’re on a budget, but I’d personally spend a bit more for something that feels higher quality and delivers better foam coverage.