Frete Grátis em todos os produtos
### Descrição do Produto
O EZ-POUR Solid Base Cap Replacement Gas Tank Cap (Fine Thread) 2 PACK é a solução ideal para quem busca eficiência e segurança no armazenamento e transporte de combustíveis. Este capô de tanque de gasolina é projetado para substituir tampas antigas e desgastadas, garantindo que seu recipiente esteja sempre em condições ideais para uso. Com um design robusto e durável, este produto é perfeito para quem precisa de uma tampa de alta resistência que não comprometa a integridade do seu tanque.
A tampa EZ-POUR é especialmente desenvolvida para evitar vazamentos e derramamentos indesejados, proporcionando uma experiência de uso mais limpa e segura. Ao atualizar seu antigo recipiente com esta nova tampa de alta resistência, você não apenas melhora a funcionalidade do seu tanque, mas também prolonga sua vida útil. Este modelo é compatível com latas de gasolina mais antigas, como as da Briggs And Stratton, Rubbermaid, Essence e Gott, tornando-o uma escolha versátil para diversos usuários.
Características do Produto:
– Capacidade de Armazenamento: Ideal para latas de gasolina, garantindo que o combustível permaneça seguro durante o transporte.
– Material Resistente: Fabricado com materiais de alta qualidade que suportam condições adversas e prolongam a durabilidade.
– Compatibilidade: Projetado para se encaixar em latas de marcas renomadas, como Briggs And Stratton, Rubbermaid, Essence e Gott.
– Evita Derramamentos: O design da tampa assegura que não haja vazamentos, mantendo seu ambiente limpo e seguro.
– Pacote com 2 Unidades: Oferece um excelente custo-benefício, permitindo que você tenha uma tampa reserva sempre à mão.
### – Instruções de Uso:
Para utilizar a tampa EZ-POUR, siga os passos abaixo:
1. Remova a Tampa Antiga: Desaperte a tampa antiga do seu tanque de gasolina, garantindo que não haja resíduos de combustível.
2. Limpeza do Local: Limpe a área de contato da lata para evitar contaminação.
3. Instalação da Nova Tampa: Alinhe a nova tampa EZ-POUR com a rosca do tanque e gire no sentido horário até que esteja firmemente ajustada.
4. Verificação de Vedações: Após a instalação, verifique se a tampa está bem vedada, evitando assim qualquer possibilidade de vazamento.
5. Armazenamento Seguro: Armazene seu tanque em um local seguro e longe de fontes de ignição.
### Perguntas Frequentes (FAQ)
Pergunta: Esta tampa é compatível com todos os tipos de latas de gasolina?
Resposta: Não, a tampa EZ-POUR é projetada para se encaixar em latas de marcas específicas, como Briggs And Stratton, Rubbermaid, Essence e Gott. Verifique a compatibilidade antes da compra.
Pergunta: A tampa EZ-POUR vem com um bico de despejo?**
Resposta: Não, a tampa EZ-POUR não inclui o bico de despejo. Ela é apenas a tampa de substituição.
Pergunta: Como posso garantir que a tampa não vaze?**
Resposta: Para evitar vazamentos, certifique-se de que a tampa esteja bem ajustada e verifique as vedações antes de armazenar o combustível.
Pergunta: Qual é a durabilidade da tampa?**
Resposta: A tampa EZ-POUR é feita de materiais de alta qualidade, projetados para resistir ao desgaste e durar por um longo período, desde que utilizada corretamente.
Pergunta: Posso usar esta tampa em recipientes de outros combustíveis?**
Resposta: A tampa foi projetada especificamente para latas de gasolina. Para outros combustíveis, recomenda-se verificar a compatibilidade e as especificações do fabricante.
thorn726 –
perfect fit no more leaks just verify your brand of can
HTK –
Bought these to eliminate leaks from an older gas can. Worked like a charm… just make sure you pay attention to which of the caps you are ordering so that it works with the make/model of gas can you have.
Mauser –
There have been so many different “standard” sizes of gas cans and spouts over the years that is it often very hard to know what will fit and what will not. I have bought lots of different EZ-POUR replacement spouts for different brands of plastic cans with excellent results. I do understand the different thread sizes used on different brands and the typical black, yellow and red color coding for EZ-POUR spouts.
I bought some of these caps to use just when transporting the cans, and the results have been mixed. On one can they work perfectly, but on another the cap is too loose and will jump the threads when trying to tighten enough to stop leaks.
Gemma –
Where I live I’m stuck with crap-tastic ‘eco friendly’ gas cans. I end up with more gas on the ground than the item I’m fueling! So this fabulous leak proof cap and a simple funnel do the trick. Brought one pack to try and found they fit all my cans, bought another pack ASAP. Tested caps by holding a several full cans upside down and Shaking hard. I have four different older cans, fit all perfectly. No anoying spouts to worry about when I drive the cans in to fill.
Hobbyman –
I needed to get a gas cap that would fit one of my existing 2 gallon gas cans that I could drill a hole in the center to make a fueling station for my RC (remote control) airplanes that use a 2cycle gas oil mix. I was impressed that it fit snugly, but more importantly had a nice rubber gasket to seal the cap onto the can. Project completed and works great and I have a spare I can stick on a can that doesn’t have a spout.
Amazon Customer –
Does not fit on all Blitz gas cans. I have three different models of Blitz gas cans. Each one fits these caps differently.
The best fit was model #50810. It is the 2 gallon model tank. I would say this model was a perfect fit and what is expected of the product. Fits snug and tight, no leakage. I was able to hold the tank upside down while full and had no problems.
The second best fit was model #31733. A five gallon gas can. There was no leakage but something just did not seem right. It did not leak, but If I really muscled it on tight it might have jumped threads and forced a leak. As far as the leak test done, I held the can while full at a tilt for about a minute and nothing leaked out. Satisfactory fit for no leakeage transportation.
The worst fit was Blitz model #50833. Another five gallon can. The cap leaked like a sieve while tilted and full. The fit was not even satisfactory for transportation. It would leak while sloshing around. Was unable to fit the cap on proper and when tightening it would easily jump threads without effort. Definitely a huge disappointment.
This might explain why the Blitz company has gone out of business. Along with stupid people handling flammables and lawsuits. No consistency in their production methods. And changing setup costs on a production line to meet some engineers or developers changing mind. The threads and nozzles should not change much over time regardless of the size of the tank. Consistency to manufacturing processes is pretty important.
I will try to post pics of the tanks and model numbers to for better verification.
Dylan P. –
I have an old Gott gas can that has fine threads (unlike all my other gas cans that have course threads), so I need to buy a pack of these for that one gas can. Seals up well, and makes is so much easier getting gas from the station without the nozzle, cap, plus outer cap to deal with. Not to mention the seal was going bad on the old gas can cap, so these solved both my problems.
Ryan –
I don’t know why its impossible to find a gas can with a regular cap. They all come with these dumb pour spouts. I hate it. Just give me a regular cap, and a funnel. Its so much easier. I’m annoyed that I had to buy a regular cap seperate of the can, but the cap itself fit great. I would suggest twisting it on and off a few times before really testing it out. I put the cap on and turned the can over, and it leaked. I twisted on and off a few times, and it worked great. Maybe the cap wasn’t on all the way the first time, or maybe it didnt have a chance to seal. Either way, it works great. I don’t really have a need for two caps though, but I’ll take it if that means I can get rid of that dumb pour spout that came with the can.