Frete Grátis em todos os produtos
Descrição do Produto: Regulador de Janela Elétrico Brock 2552-2015L
O Regulador de Janela Elétrico Brock 2552-2015L é a solução ideal para quem busca um desempenho superior e durabilidade para o sistema de janelas do seu Fiat 500, 500c ou 500e. Este componente aftermarket foi projetado especificamente para os modelos de 2012 a 2019, garantindo uma substituição perfeita e compatível. Utilize a ferramenta de compatibilidade do veículo para verificar se este regulador atende às suas necessidades.
Este regulador de janela elétrica é um substituto compatível para as peças originais 68070267AE e FI1350100, oferecendo uma instalação sem complicações e um ajuste preciso. O regulador é destinado ao lado do motorista (lado esquerdo) e vem equipado com um motor potente, que proporciona um funcionamento suave e eficiente. Um dos principais diferenciais deste produto é o guia de vidro de metal aprimorado, que elimina o ponto de falha comum encontrado nos guias de vidro plásticos das peças originais. Fabricado para atender ou superar as especificações originais do equipamento (OE), o Brock 2552-2015L garante uma performance confiável e duradoura.
Além disso, o produto conta com uma garantia limitada de 1 ano, proporcionando segurança e tranquilidade ao consumidor.
Instruções de Uso:
Para instalar o Regulador de Janela Elétrico Brock 2552-2015L, siga os passos abaixo:
1. Desconecte a Bateria: Antes de iniciar a instalação, desconecte a bateria do veículo para evitar qualquer risco elétrico.
2. Remova o Painel da Porta: Utilize ferramentas adequadas para remover o painel da porta do lado do motorista, garantindo que não danifique os clipes de fixação.
3. Desconecte o Regulador Antigo: Desconecte o regulador de janela antigo, removendo os parafusos e desconectando os fios do motor.
4. Instale o Novo Regulador: Posicione o Regulador de Janela Elétrico Brock 2552-2015L no lugar do regulador antigo, fixando-o com os parafusos fornecidos.
5. Conecte os Fios: Reconecte os fios do motor ao novo regulador.
6. Teste o Funcionamento: Antes de recolocar o painel da porta, teste o funcionamento da janela para garantir que tudo esteja operando corretamente.
7. Recoloque o Painel da Porta: Após a verificação, reinstale o painel da porta e reconecte a bateria.
Características do Produto:
– Compatibilidade: Projetado para Fiat 500 (2012-2019), Fiat 500c (2012-2019) e Fiat 500e (2013-2019).
– Substituição Direta: Compatível com as peças originais 68070267AE e FI1350100.
– Material Durável: Guia de vidro de metal que elimina falhas comuns de guias plásticos.
– Motor Integrado: Motor potente para operação suave e eficiente.
– Garantia: 1 ano de garantia limitada.
Perguntas Frequentes (FAQ):
Pergunta: Este regulador é compatível com meu Fiat 500?
Resposta: Utilize a ferramenta de compatibilidade do veículo para verificar se o Regulador de Janela Elétrico Brock 2552-2015L é adequado para o seu modelo específico.
Pergunta: O que diferencia este regulador de outros no mercado?
Resposta: O Brock 2552-2015L possui um guia de vidro de metal aprimorado, que elimina falhas comuns encontradas em guias plásticos, garantindo maior durabilidade.
Pergunta: Como posso garantir uma instalação correta?
Resposta: Siga as instruções de uso detalhadas, que incluem desconectar a bateria e testar o funcionamento antes de recolocar o painel da porta.
Pergunta: O que fazer se o regulador não funcionar após a instalação?
Resposta: Verifique todas as conexões elétricas e certifique-se de que o motor está corretamente instalado. Se o problema persistir, entre em contato com o suporte ao cliente.
Pergunta: Qual é a duração da garantia?
Resposta: O Regulador de Janela Elétrico Brock 2552-2015L vem com uma garantia limitada de 1 ano.
Robert Hancox –
This is the second window motor I’ve had to replace on my daughter’s 2013 Fiat 500. This is a different brand from the passenger side replacement but it works just as good and fits perfectly. The only difference I found was how the glass connects to the motor assembly. This one uses a plastic post that goes in the hole in the glass and a cotter pin secures it. At first I thought it was going to be a pain to insert the cotter pin, since you kind of have to do it blind because it’s inside the door, but you can see it well enough and all you have to do is slide the cotter pin along the glass up to the hole and then push it in. The other brand uses a clip that you slide the window onto. A bit easier to make the connection but not sure of it’s durability. Time will tell which one lasts longer. I have no reservations recommending this product to others.
Pavel B –
I bought this to replace the part that broke on my wife’s 2016 Fiat 500. This looks different than the factory part, but still fits in the exact same space as the old window regulator unit, while being slightly cheaper and easier to handle. It also comes with a new set of nuts and bolts to fasten it. The window latch mechanism has been completely redesigned, but still fits in the same place in the window glass as the old plastic latch. There is a special tool included to correctly install the latch, and should be self-explanatory once it is in place. I installed this a few weeks ago, and it still works great. There are videos available online that show how to take apart the door and replace the window regulator.
Pedro q –
I recommend
kjm8888 –
UPDATE: While the metal post that this unit has is certainly more robust than the plastic clip of the factory unit, the motor raises and lowers much faster whither a hard stop at full open or close. That hard stop caused the plastic cable mount to break and dropped the window into the door. So, basically, a different plastic part failure with the same result. I have alerted Brock to the situation. Hopefully will get a response.
For about the same price as the other available options, this unit has a metal clip to hold the window. Most of the time when the factory unit fails it’s because the cheap plastic clip has become brittle and breaks. That won’t happen with this unit’s metal clip. Other replacement parts have the same factory style plastic clip. Avoid those unless you want to do another replacement down the road. Also, installation is pretty easy. There are videos online if you need guidance. Just a 30-40 minute job taking your time.
Person of Interest –
I bought this replacement because the window clip in the photo appeared to be made of metal, which seemed a good upgrade from the standard Fiat 500 window regulator clip made of white plastic. As any Fiat owner knows, that plastic clip is the part that breaks. A metal clip would be so much better.
Unfortunately, the clip on the regulator sent to me was the standard plastic one. I was disappointed, but went ahead and installed this replacement.
Barely two months later, and the new clip broke.
Cosette R. Simon –
Most garages want $400 or more to replace this regulator. There are a few videos online and they take you through it step by step. It isn’t that difficult you just have to have the confidence that you can do it. This replacement version is much better than the OEM. That white plastic piece always breaks. Don’t bother just replacing it, buy this whole new unit instead because it is much more robust.
MJ –
I have been having problems with both of my windows. I was able to repair one but had to purchase this updated regulator to repair the other side. WOW, what a difference. I’m planning to order the other side so they both match. One window goes twice as fast as the other. Much better design as far as the glass attachment. You should have been the original equipment supplier. Nice job.
Amazon Customer –
The ones I got did have a metal clip. I went ahead and got both sides, figured the other would break eventually.
However they go up and down faster and hit hard at the end of their travel. So I had one fail already in about a year’s time, the clip didn’t fail but another plastic piece did so I’ve put the old one back in and try to not run the other one all the way down and stop before full up and then then bump it up slowly to full up so it doesn’t hit so hard. They looked like they were going to be a better solution, they replaced the plastic clip with a metal post unfortunately there are still plastic elsewhere that will fail if let it hit at full speed at the end of their travel.